[PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support

Sascha Hauer s.hauer at pengutronix.de
Fri Nov 23 02:39:39 EST 2012


On Fri, Nov 23, 2012 at 02:53:41PM +0800, Peter Chen wrote:
> On Wed, Nov 21, 2012 at 03:06:32PM +0100, Michael Grzeschik wrote:
> > This adds mx53 as the next user of the usbmisc driver and makes it
> > possible to disable the overcurrent-detection of the internal phy.
> > 
> > Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> > Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
> > ---
> > Changes since v2:
> > * added defines for register offsets and bitmasks
> > * fixed disable_oc option for all ports
> > 
> >  drivers/usb/chipidea/usbmisc_imx.c |   51 ++++++++++++++++++++++++++++++++++++
> >  1 file changed, 51 insertions(+)
> > 
> > diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> > index e090e0f..b1811df 100644
> > --- a/drivers/usb/chipidea/usbmisc_imx.c
> > +++ b/drivers/usb/chipidea/usbmisc_imx.c
> > @@ -19,6 +19,13 @@
> >  
> >  #define USB_DEV_MAX 4
> >  
> > +#define MX53_USB_OTG_PHY_CTRL_0_OFFSET	0x08;
> > +#define MX53_USB_UH2_CTRL_OFFSET	0x14;
> > +#define MX53_USB_UH3_CTRL_OFFSET	0x18;
> > +#define MX53_BM_OVER_CUR_DIS_H1		BIT(5)
> > +#define MX53_BM_OVER_CUR_DIS_OTG	BIT(8)
> > +#define MX53_BM_OVER_CUR_DIS_UHx	BIT(30)
> > +
> >  #define MX6_BM_OVER_CUR_DIS		BIT(7)
> 
> As every SoC platform's non-core register mapping is different,
> it is better to use .h to put register bit definition

What do the different register mapping have to do with putting the
definitions in .h files or not?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-arm-kernel mailing list