[PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support

Peter Chen peter.chen at freescale.com
Fri Nov 23 01:53:41 EST 2012


On Wed, Nov 21, 2012 at 03:06:32PM +0100, Michael Grzeschik wrote:
> This adds mx53 as the next user of the usbmisc driver and makes it
> possible to disable the overcurrent-detection of the internal phy.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
> ---
> Changes since v2:
> * added defines for register offsets and bitmasks
> * fixed disable_oc option for all ports
> 
>  drivers/usb/chipidea/usbmisc_imx.c |   51 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index e090e0f..b1811df 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -19,6 +19,13 @@
>  
>  #define USB_DEV_MAX 4
>  
> +#define MX53_USB_OTG_PHY_CTRL_0_OFFSET	0x08;
> +#define MX53_USB_UH2_CTRL_OFFSET	0x14;
> +#define MX53_USB_UH3_CTRL_OFFSET	0x18;
> +#define MX53_BM_OVER_CUR_DIS_H1		BIT(5)
> +#define MX53_BM_OVER_CUR_DIS_OTG	BIT(8)
> +#define MX53_BM_OVER_CUR_DIS_UHx	BIT(30)
> +
>  #define MX6_BM_OVER_CUR_DIS		BIT(7)

As every SoC platform's non-core register mapping is different,
it is better to use .h to put register bit definition
>  
>  struct imx_usbmisc {
> @@ -54,6 +61,45 @@ static struct usbmisc_usb_device *get_usbdev(struct device *dev)
>  	return &usbmisc->usbdev[i];
>  }
>  
> +static int usbmisc_imx53_init(struct device *dev)
> +{
> +	struct usbmisc_usb_device *usbdev;
> +	void __iomem *reg;
> +	unsigned long flags;
> +	u32 val;
> +
> +	usbdev = get_usbdev(dev);
> +	if (IS_ERR(usbdev))
> +		return PTR_ERR(usbdev);
> +
> +	if (usbdev->disable_oc) {
> +		spin_lock_irqsave(&usbmisc->lock, flags);
> +		switch (usbdev->index) {
> +		case 0:
> +			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
> +			val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
> +			break;
> +		case 1:
> +			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
> +			val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
> +			break;
> +		case 2:
> +			reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
> +			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
> +			break;
> +		case 3:
> +			reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
> +			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
> +			break;
> +		}
> +		if (reg && val)
> +			writel(val, reg);
> +		spin_unlock_irqrestore(&usbmisc->lock, flags);
> +	}
> +
> +	return 0;
> +}
> +
>  static int usbmisc_imx6q_init(struct device *dev)
>  {
>  
> @@ -76,11 +122,16 @@ static int usbmisc_imx6q_init(struct device *dev)
>  	return 0;
>  }
>  
> +static const struct usbmisc_ops imx53_usbmisc_ops = {
> +	.init = usbmisc_imx53_init,
> +};
> +
>  static const struct usbmisc_ops imx6q_usbmisc_ops = {
>  	.init = usbmisc_imx6q_init,
>  };
>  
>  static const struct of_device_id usbmisc_imx_dt_ids[] = {
> +	{ .compatible = "fsl,imx53-usbmisc", .data = (void *)&imx53_usbmisc_ops },
>  	{ .compatible = "fsl,imx6q-usbmisc", .data = (void *)&imx6q_usbmisc_ops },
>  	{ /* sentinel */ }
>  };
> -- 
> 1.7.10.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 

Best Regards,
Peter Chen




More information about the linux-arm-kernel mailing list