[PATCH v2 10/14] ARM: Kirkwood: Convert ib62x0 to pinctrl.
Andrew Lunn
andrew at lunn.ch
Sat Nov 17 11:00:52 EST 2012
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Tested-by: Simon Baatz <gmbnomis at gmail.com>
---
arch/arm/boot/dts/kirkwood-ib62x0.dts | 34 +++++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/board-ib62x0.c | 21 --------------------
2 files changed, 34 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 6a9558d..71902da 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
@@ -16,6 +17,39 @@
};
ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pinctrl-0 = < &pmx_nand
+ &pmx_led_os_red &pmx_power_off
+ &pmx_led_os_green &pmx_led_usb_transfer
+ &pmx_button_reset &pmx_button_usb_copy >;
+ pinctrl-names = "default";
+
+ pmx_led_os_red: pmx-led-os-red {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_power_off: pmx-power-off {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ pmx_led_os_green: pmx-led-os-green {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+ pmx_led_usb_transfer: pmx-led-usb-transfer {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ pmx_button_usb_copy: pmx-button-usb-copy {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ };
serial at 12000 {
clock-frequency = <200000000>;
status = "okay";
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 7b8adf5..3dc0fdf 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -22,37 +22,16 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int ib62x0_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP22_GPIO, /* OS LED red */
- MPP24_GPIO, /* Power off device */
- MPP25_GPIO, /* OS LED green */
- MPP27_GPIO, /* USB transfer LED */
- MPP28_GPIO, /* Reset button */
- MPP29_GPIO, /* USB Copy button */
- 0
-};
-
void __init ib62x0_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(ib62x0_mpp_config);
-
kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
}
--
1.7.10.4
More information about the linux-arm-kernel
mailing list