[PATCH] ARM: dts: exynos4: Use drive strength 3 for SD pins
Tomasz Figa
t.figa at samsung.com
Mon Nov 19 09:52:37 EST 2012
This patch modifies pin control groups of SD pins on Exynos4210 and
Exynos4x12 to use drive strength 3, which corresponds to
S5P_GPIO_DRVSTR_LV4 in legacy non-DT code.
This is needed at least on Origen board for sdhci2 to work.
Signed-off-by: Tomasz Figa <t.figa at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 56 +++++++++++++++----------------
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 56 +++++++++++++++----------------
2 files changed, 56 insertions(+), 56 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 6a4a1a0..55a2efb 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -482,196 +482,196 @@
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_clk: sd4-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_cmd: sd4-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_cd: sd4-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus1: sd4-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus4: sd4-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus8: sd4-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <4>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpk1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpk1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpk1-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpk1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpk2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpk2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpk2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpk2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus8: sd2-bus-width8 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_clk: sd3-clk {
samsung,pins = "gpk3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_cmd: sd3-cmd {
samsung,pins = "gpk3-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_cd: sd3-cd {
samsung,pins = "gpk3-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_bus1: sd3-bus-width1 {
samsung,pins = "gpk3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
eint0: ext-int0 {
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 56f4669..8e6115a 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -586,196 +586,196 @@
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_clk: sd4-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_cmd: sd4-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_cd: sd4-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus1: sd4-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus4: sd4-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus8: sd4-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <4>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpk1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpk1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpk1-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpk1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpk2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpk2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpk2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpk2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus8: sd2-bus-width8 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_clk: sd3-clk {
samsung,pins = "gpk3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_cmd: sd3-cmd {
samsung,pins = "gpk3-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_cd: sd3-cd {
samsung,pins = "gpk3-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_bus1: sd3-bus-width1 {
samsung,pins = "gpk3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
keypad_col0: keypad-col0 {
--
1.8.0
More information about the linux-arm-kernel
mailing list