[PATCHv2] ARM: OMAP4: USB: power down MUSB PHY during boot

[Kevin Hilman]

Felipe Balbi <balbi at ti.com> writes:

> HI,
>
> On Fri, Nov 09, 2012 at 04:30:35PM +0200, Tero Kristo wrote:
>> Commit c9e4412ab8eb8ef82d645d8749c4ce96ad490007 removed all of the USB
>> PHY functions for OMAP4, but this causes a problem with core retention
>> as the MUSB module remains enabled if omap-usb2 phy driver is not used.
>> This keeps the USB DPLL enabled and prevents l3_init pwrdm from idling.
>> 
>> Fixed by adding a minimal function back that disables the USB PHY during
>> boot.
>> 
>> Signed-off-by: Tero Kristo <t-kristo at ti.com>
>> Cc: Kishon Vijay Abraham I <kishon at ti.com>
>> Cc: Felipe Balbi <balbi at ti.com>
>> Cc: Tony Lindgren <tony at atomide.com>
>> Cc: Kevin Hilman <khilman at ti.com>
>
> looks good to me. I would still suggest adding a REVISIT or FIXME note
> stating that this should be moved to SCM driver eventually ;-)
>
> Other than that:
>
> Acked-by: Felipe Balbi <balbi at ti.com>

Thanks will try to get this in for v3.8 along with the original patch
4/9 which gets full-chip retention working on OMAP4.

Kevin