Configure the USB device/host on sam9g25 module
Martin Peevski
martin at ronetix.at
Fri Nov 16 02:25:51 EST 2012
Hi,
the evaluation kit sam9x5-ek is supplied with micro USB connector, I
think it's impossible to connect mini USB on that?
On 15/11/12 18:56, Zhong Li wrote:
> It is a hardware configuration problem. You must use a type-A mini USB
> cable.
>
> Martin Peevski <martin at ronetix.at> wrote:
>
> Hi,
>
> I'm working with sam9g25 module placed on sam9x5-ek. sam9g25 has 2
> host USB's and 1 device/host USB (on the micro USB of sam9x5-ek). Both
> USB hosts accept mass storage devices and works correct. It was
> impossible to do 2 things with the USB device/host (placed on the micro
> USB of sam9x5-ek):
>
> 1. Put in it mass storage device - the kernel want not to
> enumerate it and give it an name (for example sda, sdb, ...). What I
> must do in the config file of kernel to be recognized the inserted mass
> storage device?
>
> 2. Connect cable from the micro USB to any of the host USB's and
> detect USB serial gadget.
>
> I tryed to make some configs for both problems in the kernel but it
> don't works. Can you, please, help me solve these problems?
>
> ------------------------------------------------------------------------
>
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121116/704df9b1/attachment-0001.html>
More information about the linux-arm-kernel
mailing list