[PATCH 5/6] ARM: sunxi: Add device tree for the A13 and the Olinuxino board

[Stefan Roese]

On 11/15/2012 11:46 PM, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
>  arch/arm/boot/dts/Makefile            |    1 +
>  arch/arm/boot/dts/sun5i-olinuxino.dts |   30 +++++++++++++++++
>  arch/arm/boot/dts/sun5i.dtsi          |   58 +++++++++++++++++++++++++++++++++
>  3 files changed, 89 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun5i-olinuxino.dts
>  create mode 100644 arch/arm/boot/dts/sun5i.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index f37cf9f..9b2d3f0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
>  	spear310-evb.dtb \
>  	spear320-evb.dtb
>  dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun5i-olinuxino.dtb
>  dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
>  	tegra20-medcom-wide.dtb \
>  	tegra20-paz00.dtb \
> diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts
> new file mode 100644
> index 0000000..add1e60
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts
> @@ -0,0 +1,30 @@
> +/*
> + * Copyright 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +/include/ "sun5i.dtsi"
> +
> +/ {
> +	model = "Olimex A13-Olinuxino";
> +	compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
> +
> +	memory {
> +		reg = <0x40000000 0x40000000>;
> +	};

Sure that the board support 1GiB of RAM? AFAIK A13 only supports 512MiB.
Please re-check.

> +	soc {
> +		duart: uart at 01c28400 {
> +			status = "okay";
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
> new file mode 100644
> index 0000000..5797323
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun5i.dtsi
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	cpus {
> +		cpu at 0 {
> +			compatible = "arm,cortex-a8";
> +		};
> +	};
> +
> +	chosen {
> +		bootargs = "earlyprintk console=ttyS0,115200";
> +	};

No memory node here? My experience is, that the soc.dtsi file should
contain a memory node with the max possible memory size of the SoC.
Which will be overwritten by the board dts file containing the max
memory size of the board.

> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		reg = <0x01c20000 0x300000>;
> +		ranges;
> +
> +		timer at 01c20c00 {
> +			compatible = "allwinner,sunxi-timer";
> +			reg = <0x01c20c00 0x400>;
> +			interrupts = <22>;
> +		};
> +
> +		intc: interrupt-controller at 01c20400 {
> +			compatible = "allwinner,sunxi-ic";
> +			reg = <0x01c20400 0x400>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +		};
> +
> +		uart1: uart at 01c28400 {
> +			compatible = "ns8250";
> +			reg = <0x01c28400 0x400>;
> +			interrupts = <2>;
> +			reg-shift = <2>;
> +			clock-frequency = <24000000>;
> +			status = "disabled";
> +		};
> +	};
> +};

Looks good so far. I suggest that with the A10/cubieboard support we
move to the following dts/dtsi organization:

sunxi.dtsi - Devices common to all Allwinner sunXi SoC's
sun4i.dtsi - sun4i Devices, will include sunxi.dtsi
sun5i.dtsi - sun5i Devices, will include sunxi.dtsi
board.dts - will include either sun4i.dtsi or sun5i.dtsi

If we agree on this, then I'll send a patch with this re-organization
with the cubieboard patches.

Thanks,
Stefan