[PATCH v2 6/7] usb: chipidea: usbmisc: add mx53 support

[Michael Grzeschik]

On Fri, Nov 16, 2012 at 03:22:34PM +0200, Alexander Shishkin wrote:
> Michael Grzeschik <m.grzeschik at pengutronix.de> writes:
> 
> > This adds mx53 as the next user of the usbmisc driver and makes it
> > possible to disable the overcurrent-detection of the internal phy.
> >
> > Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> > Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
> > ---
> >  drivers/usb/chipidea/usbmisc_imx.c |   28 ++++++++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> >
> > diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> > index 913e414..9718500 100644
> > --- a/drivers/usb/chipidea/usbmisc_imx.c
> > +++ b/drivers/usb/chipidea/usbmisc_imx.c
> > @@ -54,6 +54,29 @@ static struct usbmisc_usb_device *get_usbdev(struct device *dev)
> >  	return &usbmisc->usbdev[i];
> >  }
> >  
> > +static int usbmisc_imx53_init(struct device *dev)
> > +{
> > +	struct usbmisc_usb_device *usbdev;
> > +	void __iomem *reg;
> > +	unsigned long flags;
> > +	u32 val;
> > +
> > +	usbdev = get_usbdev(dev);
> > +	if (IS_ERR(usbdev))
> > +		return PTR_ERR(usbdev);
> > +
> > +	reg = usbmisc->base + usbdev->index * 8;
> > +
> > +	if (usbdev->disable_oc) {
> > +		spin_lock_irqsave(&usbmisc->lock, flags);
> > +		val = readl(reg);
> > +		writel(val | (1 << 5), reg);
> 
> We know now that (1 << 5) probably means "disable overcurrent
> detection", but is there a definition for this register's bits
> somewhere?

Will add defines for the magic numbers used.

Thanks,
Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |