[PATCH v7 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Vivek Gautam
gautamvivek1987 at gmail.com
Wed Nov 7 07:59:03 EST 2012
Hi all,
On Tue, Oct 30, 2012 at 10:27 AM, Praveen Paneri <p.paneri at samsung.com> wrote:
>
> This driver uses usb phy framework to interact with s3c-hsotg. Supports
> phy_init and phy_shutdown functions to enable/disable usb phy. Support
> will be extended to host controllers and more Samsung SoCs.
>
> Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
> Acked-by: Heiko Stuebner <heiko at sntech.de>
> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
I have tested this patch-series for S3C6410 and S5PV310 for gadget functioning.
Looks good to me.
Tested-by: Vivek Gautam <gautam.vivek at samsung.com>
> ---
> .../devicetree/bindings/usb/samsung-usbphy.txt | 11 +
> drivers/usb/phy/Kconfig | 8 +
> drivers/usb/phy/Makefile | 1 +
> drivers/usb/phy/samsung-usbphy.c | 360 ++++++++++++++++++++
> include/linux/platform_data/samsung-usbphy.h | 27 ++
> 5 files changed, 407 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> create mode 100644 drivers/usb/phy/samsung-usbphy.c
> create mode 100644 include/linux/platform_data/samsung-usbphy.h
>
> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> new file mode 100644
> index 0000000..7b26e2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
> @@ -0,0 +1,11 @@
> +* Samsung's usb phy transceiver
> +
> +The Samsung's phy transceiver is used for controlling usb otg phy for
> +s3c-hsotg usb device controller.
> +TODO: Adding the PHY binding with controller(s) according to the under
> +developement generic PHY driver.
> +
> +Required properties:
> +- compatible : should be "samsung,exynos4210-usbphy"
> +- reg : base physical address of the phy registers and length of memory mapped
> + region.
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index 63c339b..313685f 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -32,3 +32,11 @@ config MV_U3D_PHY
> help
> Enable this to support Marvell USB 3.0 phy controller for Marvell
> SoC.
> +
> +config SAMSUNG_USBPHY
> + bool "Samsung USB PHY controller Driver"
> + depends on USB_S3C_HSOTG
> + select USB_OTG_UTILS
> + help
> + Enable this to support Samsung USB phy controller for samsung
> + SoCs.
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index b069f29..55dcfc1 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
> obj-$(CONFIG_USB_ISP1301) += isp1301.o
> obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
> obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
> +obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
> new file mode 100644
> index 0000000..3c84aab
> --- /dev/null
> +++ b/drivers/usb/phy/samsung-usbphy.c
> @@ -0,0 +1,360 @@
> +/* linux/drivers/usb/phy/samsung-usbphy.c
> + *
> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Author: Praveen Paneri <p.paneri at samsung.com>
> + *
> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/usb/otg.h>
> +#include <linux/platform_data/samsung-usbphy.h>
> +
> +/* Register definitions */
> +
> +#define SAMSUNG_PHYPWR (0x00)
> +
> +#define PHYPWR_NORMAL_MASK (0x19 << 0)
> +#define PHYPWR_OTG_DISABLE (0x1 << 4)
> +#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
> +#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
> +/* For Exynos4 */
> +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
> +#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
> +
> +#define SAMSUNG_PHYCLK (0x04)
> +
> +#define PHYCLK_MODE_USB11 (0x1 << 6)
> +#define PHYCLK_EXT_OSC (0x1 << 5)
> +#define PHYCLK_COMMON_ON_N (0x1 << 4)
> +#define PHYCLK_ID_PULL (0x1 << 2)
> +#define PHYCLK_CLKSEL_MASK (0x3 << 0)
> +#define PHYCLK_CLKSEL_48M (0x0 << 0)
> +#define PHYCLK_CLKSEL_12M (0x2 << 0)
> +#define PHYCLK_CLKSEL_24M (0x3 << 0)
> +
> +#define SAMSUNG_RSTCON (0x08)
> +
> +#define RSTCON_PHYLINK_SWRST (0x1 << 2)
> +#define RSTCON_HLINK_SWRST (0x1 << 1)
> +#define RSTCON_SWRST (0x1 << 0)
> +
> +#ifndef MHZ
> +#define MHZ (1000*1000)
> +#endif
> +
> +enum samsung_cpu_type {
> + TYPE_S3C64XX,
> + TYPE_EXYNOS4210,
> +};
> +
> +/*
> + * struct samsung_usbphy - transceiver driver state
> + * @phy: transceiver structure
> + * @plat: platform data
> + * @dev: The parent device supplied to the probe function
> + * @clk: usb phy clock
> + * @regs: usb phy register memory base
> + * @ref_clk_freq: reference clock frequency selection
> + * @cpu_type: machine identifier
> + */
> +struct samsung_usbphy {
> + struct usb_phy phy;
> + struct samsung_usbphy_data *plat;
> + struct device *dev;
> + struct clk *clk;
> + void __iomem *regs;
> + int ref_clk_freq;
> + int cpu_type;
> +};
> +
> +#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
> +
> +/*
> + * Returns reference clock frequency selection value
> + */
> +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
> +{
> + struct clk *ref_clk;
> + int refclk_freq = 0;
> +
> + ref_clk = clk_get(sphy->dev, "xusbxti");
> + if (IS_ERR(ref_clk)) {
> + dev_err(sphy->dev, "Failed to get reference clock\n");
> + return PTR_ERR(ref_clk);
> + }
> +
> + switch (clk_get_rate(ref_clk)) {
> + case 12 * MHZ:
> + refclk_freq = PHYCLK_CLKSEL_12M;
> + break;
> + case 24 * MHZ:
> + refclk_freq = PHYCLK_CLKSEL_24M;
> + break;
> + case 48 * MHZ:
> + refclk_freq = PHYCLK_CLKSEL_48M;
> + break;
> + default:
> + if (sphy->cpu_type == TYPE_S3C64XX)
> + refclk_freq = PHYCLK_CLKSEL_48M;
> + else
> + refclk_freq = PHYCLK_CLKSEL_24M;
> + break;
> + }
> + clk_put(ref_clk);
> +
> + return refclk_freq;
> +}
> +
> +static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
> +{
> + void __iomem *regs = sphy->regs;
> + u32 phypwr;
> + u32 phyclk;
> + u32 rstcon;
> +
> + /* set clock frequency for PLL */
> + phyclk = sphy->ref_clk_freq;
> + phypwr = readl(regs + SAMSUNG_PHYPWR);
> + rstcon = readl(regs + SAMSUNG_RSTCON);
> +
> + switch (sphy->cpu_type) {
> + case TYPE_S3C64XX:
> + phyclk &= ~PHYCLK_COMMON_ON_N;
> + phypwr &= ~PHYPWR_NORMAL_MASK;
> + rstcon |= RSTCON_SWRST;
> + break;
> + case TYPE_EXYNOS4210:
> + phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
> + rstcon |= RSTCON_SWRST;
> + default:
> + break;
> + }
> +
> + writel(phyclk, regs + SAMSUNG_PHYCLK);
> + /* set to normal of PHY0 */
> + writel(phypwr, regs + SAMSUNG_PHYPWR);
> + /* reset all ports of PHY and Link */
> + writel(rstcon, regs + SAMSUNG_RSTCON);
> + udelay(10);
> + rstcon &= ~RSTCON_SWRST;
> + writel(rstcon, regs + SAMSUNG_RSTCON);
> +}
> +
> +static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
> +{
> + void __iomem *regs = sphy->regs;
> + u32 phypwr;
> +
> + phypwr = readl(regs + SAMSUNG_PHYPWR);
> +
> + switch (sphy->cpu_type) {
> + case TYPE_S3C64XX:
> + phypwr |= PHYPWR_NORMAL_MASK;
> + break;
> + case TYPE_EXYNOS4210:
> + phypwr |= PHYPWR_NORMAL_MASK_PHY0;
> + default:
> + break;
> + }
> +
> + /* unset to normal of PHY0 */
> + writel(phypwr, regs + SAMSUNG_PHYPWR);
> +}
> +
> +/*
> + * The function passed to the usb driver for phy initialization
> + */
> +static int samsung_usbphy_init(struct usb_phy *phy)
> +{
> + struct samsung_usbphy *sphy;
> + int ret = 0;
> +
> + sphy = phy_to_sphy(phy);
> +
> + /* Enable the phy clock */
> + ret = clk_prepare_enable(sphy->clk);
> + if (ret) {
> + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
> + return ret;
> + }
> +
> + /* Disable phy isolation */
> + if (sphy->plat && sphy->plat->pmu_isolation)
> + sphy->plat->pmu_isolation(false);
> +
> + /* Initialize usb phy registers */
> + samsung_usbphy_enable(sphy);
> +
> + /* Disable the phy clock */
> + clk_disable_unprepare(sphy->clk);
> + return ret;
> +}
> +
> +/*
> + * The function passed to the usb driver for phy shutdown
> + */
> +static void samsung_usbphy_shutdown(struct usb_phy *phy)
> +{
> + struct samsung_usbphy *sphy;
> +
> + sphy = phy_to_sphy(phy);
> +
> + if (clk_prepare_enable(sphy->clk)) {
> + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
> + return;
> + }
> +
> + /* De-initialize usb phy registers */
> + samsung_usbphy_disable(sphy);
> +
> + /* Enable phy isolation */
> + if (sphy->plat && sphy->plat->pmu_isolation)
> + sphy->plat->pmu_isolation(true);
> +
> + clk_disable_unprepare(sphy->clk);
> +}
> +
> +static const struct of_device_id samsung_usbphy_dt_match[];
> +
> +static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
> +{
> + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
> + int data;
> + const struct of_device_id *match;
> + match = of_match_node(samsung_usbphy_dt_match,
> + pdev->dev.of_node);
> + data = (int) match->data;
> + return data;
> + }
> +
> + return platform_get_device_id(pdev)->driver_data;
> +}
> +
> +static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
> +{
> + struct samsung_usbphy *sphy;
> + struct samsung_usbphy_data *pdata;
> + struct device *dev = &pdev->dev;
> + struct resource *phy_mem;
> + void __iomem *phy_base;
> + struct clk *clk;
> + int ret = 0;
> +
> + pdata = pdev->dev.platform_data;
> + if (!pdata) {
> + dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
> + return -EINVAL;
> + }
> +
> + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!phy_mem) {
> + dev_err(dev, "%s: missing mem resource\n", __func__);
> + return -ENODEV;
> + }
> +
> + phy_base = devm_request_and_ioremap(dev, phy_mem);
> + if (!phy_base) {
> + dev_err(dev, "%s: register mapping failed\n", __func__);
> + return -ENXIO;
> + }
> +
> + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
> + if (!sphy)
> + return -ENOMEM;
> +
> + clk = devm_clk_get(dev, "otg");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "Failed to get otg clock\n");
> + return PTR_ERR(clk);
> + }
> +
> + sphy->dev = &pdev->dev;
> + sphy->plat = pdata;
> + sphy->regs = phy_base;
> + sphy->clk = clk;
> + sphy->phy.dev = sphy->dev;
> + sphy->phy.label = "samsung-usbphy";
> + sphy->phy.init = samsung_usbphy_init;
> + sphy->phy.shutdown = samsung_usbphy_shutdown;
> + sphy->cpu_type = samsung_usbphy_get_driver_data(pdev);
> + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
> +
> + platform_set_drvdata(pdev, sphy);
> +
> + ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
> + return ret;
> +}
> +
> +static int __exit samsung_usbphy_remove(struct platform_device *pdev)
> +{
> + struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
> +
> + usb_remove_phy(&sphy->phy);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id samsung_usbphy_dt_match[] = {
> + {
> + .compatible = "samsung,s3c64xx-usbphy",
> + .data = (void *)TYPE_S3C64XX,
> + }, {
> + .compatible = "samsung,exynos4210-usbphy",
> + .data = (void *)TYPE_EXYNOS4210,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
> +#else
> +#define samsung_usbphy_dt_match NULL
> +#endif
> +
> +static struct platform_device_id samsung_usbphy_driver_ids[] = {
> + {
> + .name = "s3c64xx-usbphy",
> + .driver_data = TYPE_S3C64XX,
> + }, {
> + .name = "exynos4210-usbphy",
> + .driver_data = TYPE_EXYNOS4210,
> + },
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
> +
> +static struct platform_driver samsung_usbphy_driver = {
> + .probe = samsung_usbphy_probe,
> + .remove = __devexit_p(samsung_usbphy_remove),
> + .id_table = samsung_usbphy_driver_ids,
> + .driver = {
> + .name = "samsung-usbphy",
> + .owner = THIS_MODULE,
> + .of_match_table = samsung_usbphy_dt_match,
> + },
> +};
> +
> +module_platform_driver(samsung_usbphy_driver);
> +
> +MODULE_DESCRIPTION("Samsung USB phy controller");
> +MODULE_AUTHOR("Praveen Paneri <p.paneri at samsung.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:samsung-usbphy");
> diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
> new file mode 100644
> index 0000000..1bd24cb
> --- /dev/null
> +++ b/include/linux/platform_data/samsung-usbphy.h
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + * http://www.samsung.com/
> + * Author: Praveen Paneri <p.paneri at samsung.com>
> + *
> + * Defines platform data for samsung usb phy driver.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __SAMSUNG_USBPHY_PLATFORM_H
> +#define __SAMSUNG_USBPHY_PLATFORM_H
> +
> +/**
> + * samsung_usbphy_data - Platform data for USB PHY driver.
> + * @pmu_isolation: Function to control usb phy isolation in PMU.
> + */
> +struct samsung_usbphy_data {
> + void (*pmu_isolation)(int on);
> +};
> +
> +extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
> +
> +#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Thanks & Regards
Vivek
More information about the linux-arm-kernel
mailing list