[PATCH 3/3 v3] clk: move IM-PD1 clocks to drivers/clk
Mike Turquette
mturquette at ti.com
Wed Nov 21 14:10:10 EST 2012
Quoting Linus Walleij (2012-11-20 13:39:49)
> The ARM IM-PD1 add-on module has a few clock of its own, let's
> move also these down to the drivers/clk/versatile driver dir
> and get rid of any remaining oldschool Integrator clocks.
>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
I replaced the v2 version in clk-next with this one. Thanks for the
quick updates.
Regards,
Mike
> ---
> ChangeLog v1->v2:
> - add GPL header
> ChangeLov v2->v3:
> - Provide exitpath, provide handling of multiple LMs
> use new ICST VCO infrastructure.
> ---
> arch/arm/mach-integrator/impd1.c | 69 +-------------------
> drivers/clk/versatile/Makefile | 1 +
> drivers/clk/versatile/clk-impd1.c | 97 ++++++++++++++++++++++++++++
> include/linux/platform_data/clk-integrator.h | 2 +
> 4 files changed, 103 insertions(+), 66 deletions(-)
> create mode 100644 drivers/clk/versatile/clk-impd1.c
>
> diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
> index e428f3a..b3d86d7 100644
> --- a/arch/arm/mach-integrator/impd1.c
> +++ b/arch/arm/mach-integrator/impd1.c
> @@ -21,10 +21,9 @@
> #include <linux/amba/bus.h>
> #include <linux/amba/clcd.h>
> #include <linux/io.h>
> +#include <linux/platform_data/clk-integrator.h>
> #include <linux/slab.h>
> -#include <linux/clkdev.h>
>
> -#include <asm/hardware/icst.h>
> #include <mach/lm.h>
> #include <mach/impd1.h>
> #include <asm/sizes.h>
> @@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
>
> struct impd1_module {
> void __iomem *base;
> - struct clk vcos[2];
> - struct clk_lookup *clks[3];
> -};
> -
> -static const struct icst_params impd1_vco_params = {
> - .ref = 24000000, /* 24 MHz */
> - .vco_max = ICST525_VCO_MAX_3V,
> - .vco_min = ICST525_VCO_MIN,
> - .vd_min = 12,
> - .vd_max = 519,
> - .rd_min = 3,
> - .rd_max = 120,
> - .s2div = icst525_s2div,
> - .idx2s = icst525_idx2s,
> -};
> -
> -static void impd1_setvco(struct clk *clk, struct icst_vco vco)
> -{
> - struct impd1_module *impd1 = clk->data;
> - u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
> -
> - writel(0xa05f, impd1->base + IMPD1_LOCK);
> - writel(val, clk->vcoreg);
> - writel(0, impd1->base + IMPD1_LOCK);
> -
> -#ifdef DEBUG
> - vco.v = val & 0x1ff;
> - vco.r = (val >> 9) & 0x7f;
> - vco.s = (val >> 16) & 7;
> -
> - pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
> - vconr, icst525_hz(&impd1_vco_params, vco));
> -#endif
> -}
> -
> -static const struct clk_ops impd1_clk_ops = {
> - .round = icst_clk_round,
> - .set = icst_clk_set,
> - .setvco = impd1_setvco,
> };
>
> void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
> @@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = {
> }
> };
>
> -static struct clk fixed_14745600 = {
> - .rate = 14745600,
> -};
> -
> static int impd1_probe(struct lm_device *dev)
> {
> struct impd1_module *impd1;
> @@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev)
> printk("IM-PD1 found at 0x%08lx\n",
> (unsigned long)dev->resource.start);
>
> - for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
> - impd1->vcos[i].ops = &impd1_clk_ops,
> - impd1->vcos[i].owner = THIS_MODULE,
> - impd1->vcos[i].params = &impd1_vco_params,
> - impd1->vcos[i].data = impd1;
> - }
> - impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
> - impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
> -
> - impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
> - dev->id);
> - impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
> - dev->id);
> - impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
> - dev->id);
> - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
> - clkdev_add(impd1->clks[i]);
> + integrator_impd1_clk_init(impd1->base, dev->id);
>
> for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
> struct impd1_device *idev = impd1_devs + i;
> @@ -431,12 +371,9 @@ static int impd1_remove_one(struct device *dev, void *data)
> static void impd1_remove(struct lm_device *dev)
> {
> struct impd1_module *impd1 = lm_get_drvdata(dev);
> - int i;
>
> device_for_each_child(&dev->dev, NULL, impd1_remove_one);
> -
> - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
> - clkdev_drop(impd1->clks[i]);
> + integrator_impd1_clk_exit(dev->id);
>
> lm_set_drvdata(dev, NULL);
>
> diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
> index c0a0f64..884e362 100644
> --- a/drivers/clk/versatile/Makefile
> +++ b/drivers/clk/versatile/Makefile
> @@ -1,4 +1,5 @@
> # Makefile for Versatile-specific clocks
> obj-$(CONFIG_ICST) += clk-icst.o
> obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
> +obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
> obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
> diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
> new file mode 100644
> index 0000000..369139a
> --- /dev/null
> +++ b/drivers/clk/versatile/clk-impd1.c
> @@ -0,0 +1,97 @@
> +/*
> + * Clock driver for the ARM Integrator/IM-PD1 board
> + * Copyright (C) 2012 Linus Walleij
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/clk-provider.h>
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/platform_data/clk-integrator.h>
> +
> +#include <mach/impd1.h>
> +
> +#include "clk-icst.h"
> +
> +struct impd1_clk {
> + struct clk *vcoclk;
> + struct clk *uartclk;
> + struct clk_lookup *clks[3];
> +};
> +
> +static struct impd1_clk impd1_clks[4];
> +
> +/*
> + * There are two VCO's on the IM-PD1 but only one is used by the
> + * kernel, that is why we are only implementing the control of
> + * IMPD1_OSC1 here.
> + */
> +
> +static const struct icst_params impd1_vco_params = {
> + .ref = 24000000, /* 24 MHz */
> + .vco_max = ICST525_VCO_MAX_3V,
> + .vco_min = ICST525_VCO_MIN,
> + .vd_min = 12,
> + .vd_max = 519,
> + .rd_min = 3,
> + .rd_max = 120,
> + .s2div = icst525_s2div,
> + .idx2s = icst525_idx2s,
> +};
> +
> +static const struct clk_icst_desc impd1_icst1_desc = {
> + .params = &impd1_vco_params,
> + .vco_offset = IMPD1_OSC1,
> + .lock_offset = IMPD1_LOCK,
> +};
> +
> +/**
> + * integrator_impd1_clk_init() - set up the integrator clock tree
> + * @base: base address of the logic module (LM)
> + * @id: the ID of this LM
> + */
> +void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
> +{
> + struct impd1_clk *imc;
> + struct clk *clk;
> + int i;
> +
> + if (id > 3) {
> + pr_crit("no more than 4 LMs can be attached\n");
> + return;
> + }
> + imc = &impd1_clks[id];
> +
> + clk = icst_clk_register(NULL, &impd1_icst1_desc, base);
> + imc->vcoclk = clk;
> + imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
> +
> + /* UART reference clock */
> + clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
> + 14745600);
> + imc->uartclk = clk;
> + imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
> + imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
> +
> + for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
> + clkdev_add(imc->clks[i]);
> +}
> +
> +void integrator_impd1_clk_exit(unsigned int id)
> +{
> + int i;
> + struct impd1_clk *imc;
> +
> + if (id > 3)
> + return;
> + imc = &impd1_clks[id];
> +
> + for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
> + clkdev_drop(imc->clks[i]);
> + clk_unregister(imc->uartclk);
> + clk_unregister(imc->vcoclk);
> +}
> diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h
> index 83fe9c2..280edac 100644
> --- a/include/linux/platform_data/clk-integrator.h
> +++ b/include/linux/platform_data/clk-integrator.h
> @@ -1 +1,3 @@
> void integrator_clk_init(bool is_cp);
> +void integrator_impd1_clk_init(void __iomem *base, unsigned int id);
> +void integrator_impd1_clk_exit(unsigned int id);
> --
> 1.7.11.7
More information about the linux-arm-kernel
mailing list