[PATCH v2 03/17] ARM: clps711x: p720t: Using "leds-gpio" driver for LED control
Alexander Shiyan
shc_work at mail.ru
Sat Nov 10 05:58:42 EST 2012
Instead of manually create LED class device, we will use "leds-gpio"
driver for LED control
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/mach-clps711x/common.h | 3 +
arch/arm/mach-clps711x/p720t.c | 79 ++++++++++++--------------------------
2 files changed, 28 insertions(+), 54 deletions(-)
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index fc0f065..83cfece 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -4,6 +4,9 @@
* Common bits.
*/
+#define CLPS711X_NR_GPIO (4 * 8 + 3)
+#define CLPS711X_GPIO(port,bit) ((port) * 8 + (bit))
+
struct sys_timer;
extern void clps711x_map_io(void);
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 2e3995a..b87952a 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -39,6 +39,8 @@
#include "common.h"
+#define GPIO_USERLED CLPS711X_GPIO(3, 0)
+
/*
* Map the P720T system PLD. It occupies two address spaces:
* 0x10000000 and 0x10400000. We map both regions as one.
@@ -104,67 +106,35 @@ static void __init p720t_init_early(void)
}
}
-/*
- * LED controled by CPLD
- */
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-static void p720t_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- u8 reg = clps_readb(PDDR);
-
- if (b != LED_OFF)
- reg |= 0x1;
- else
- reg &= ~0x1;
-
- clps_writeb(reg, PDDR);
-}
+static struct gpio_led p720t_gpio_leds[] = {
+ {
+ .name = "User LED",
+ .default_trigger = "heartbeat",
+ .gpio = GPIO_USERLED,
+ },
+};
-static enum led_brightness p720t_led_get(struct led_classdev *cdev)
-{
- u8 reg = clps_readb(PDDR);
+static struct gpio_led_platform_data p720t_gpio_led_pdata = {
+ .leds = p720t_gpio_leds,
+ .num_leds = ARRAY_SIZE(p720t_gpio_leds),
+};
- return (reg & 0x1) ? LED_FULL : LED_OFF;
-}
+static struct platform_device p720t_gpio_led_pdev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &p720t_gpio_led_pdata,
+ },
+};
-static int __init p720t_leds_init(void)
+static void __init p720t_init(void)
{
-
- struct led_classdev *cdev;
- int ret;
-
- if (!machine_is_p720t())
- return -ENODEV;
-
- cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
- if (!cdev)
- return -ENOMEM;
-
- cdev->name = "p720t:0";
- cdev->brightness_set = p720t_led_set;
- cdev->brightness_get = p720t_led_get;
- cdev->default_trigger = "heartbeat";
-
- ret = led_classdev_register(NULL, cdev);
- if (ret < 0) {
- kfree(cdev);
- return ret;
- }
-
- return 0;
+ platform_device_register_simple("uart-clps711x", 0, NULL, 0);
}
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(p720t_leds_init);
-#endif
-
-static void __init p720t_init(void)
+static void __init p720t_init_late(void)
{
- platform_device_register_simple("uart-clps711x", 0, NULL, 0);
+ platform_device_register(&p720t_gpio_led_pdev);
}
MACHINE_START(P720T, "ARM-Prospector720T")
@@ -176,5 +146,6 @@ MACHINE_START(P720T, "ARM-Prospector720T")
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
.init_machine = p720t_init,
+ .init_late = p720t_init_late,
.restart = clps711x_restart,
MACHINE_END
--
1.7.8.6
More information about the linux-arm-kernel
mailing list