[PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node

[Marc Kleine-Budde]

On 11/14/2012 07:08 PM, AnilKumar Ch wrote:
> Add a new address space/memory resource to d_can device tree node. D_CAN
> RAM initialization is achieved through RAMINIT register which is part of
> AM33XX control module address space. D_CAN RAM init or de-init should be
> done by writing instance corresponding value to control module register.
> 
> Till we have a separate control module driver to write to control module,
> d_can driver will handle the register writes to control module by itself.
> So a new address space to represent this control module register is added
> to d_can driver.
> 
> Signed-off-by: AnilKumar Ch <anilkumar at ti.com>

This does not apply to net-next/master:

Applying: ARM: dts: AM33XX: Add memory resource to d_can node
error: patch failed: arch/arm/boot/dts/am33xx.dtsi:227
error: arch/arm/boot/dts/am33xx.dtsi: patch does not apply
Patch failed at 0003 ARM: dts: AM33XX: Add memory resource to d_can node

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 261 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20121120/b22fa99d/attachment.sig>