[PATCH] arm/dts: Add basic support for gta04 (Openmoko next generation) board.

[Grant Likely]

On Wed, 14 Nov 2012 21:26:58 +0100, Belisko Marek <marek.belisko at gmail.com> wrote:
> CC' Grant & Rob

Hi Marek

Since this is an OMAP board, you should send the changes to Tony and
they should be merged through the arm-soc tree.

g.

> 
> On Tue, Oct 30, 2012 at 10:42 PM, Marek Belisko
> <marek.belisko at open-nandra.com> wrote:
> > Signed-off-by: Marek Belisko <marek.belisko at open-nandra.com>
> > ---
> >  arch/arm/boot/dts/omap3-gta04.dts |   65 +++++++++++++++++++++++++++++++++++++
> >  1 file changed, 65 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/omap3-gta04.dts
> >
> > diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
> > new file mode 100644
> > index 0000000..76efd13
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/omap3-gta04.dts
> > @@ -0,0 +1,65 @@
> > +/*
> > + * Copyright (C) 2012 Marek Belisko <marek.belisko at open-nandra.com>
> > + *
> > + * Based on omap3-beagle-xm.dts
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +/dts-v1/;
> > +
> > +/include/ "omap3.dtsi"
> > +
> > +/ {
> > +       model = "OMAP3 GTA04";
> > +       compatible = "ti,omap3-gta04", "ti,omap3";
> > +
> > +       memory {
> > +               device_type = "memory";
> > +               reg = <0x80000000 0x20000000>; /* 512 MB */
> > +       };
> > +
> > +       gpio-keys {
> > +               compatible = "gpio-keys";
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               aux-button {
> > +                       label = "AUX";
> > +                       linux,code = <169>;
> > +                       gpios = <&gpio1 7 1>;
> > +                       gpio-key,wakeup;
> > +               };
> > +       };
> > +};
> > +
> > +&i2c1 {
> > +       clock-frequency = <2600000>;
> > +
> > +       twl: twl at 48 {
> > +               reg = <0x48>;
> > +               interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> > +               interrupt-parent = <&intc>;
> > +       };
> > +};
> > +
> > +/include/ "twl4030.dtsi"
> > +
> > +&i2c2 {
> > +       clock-frequency = <400000>;
> > +       /* Pressure Sensor */
> > +       bmp085 at 77 {
> > +               compatible = "bosch,bmp085";
> > +               reg = <0x77>;
> > +       };
> > +};
> > +
> > +&i2c3 {
> > +       clock-frequency = <100000>;
> > +};
> > +
> > +&mmc1 {
> > +       vmmc-supply = <&vmmc1>;
> > +       bus-width = <4>;
> > +};
> > +
> > --
> > 1.7.9.5
> >
> 
> 
> 
> -- 
> as simple and primitive as possible
> -------------------------------------------------
> Marek Belisko - OPEN-NANDRA
> Freelance Developer
> 
> Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
> Tel: +421 915 052 184
> skype: marekwhite
> twitter: #opennandra
> web: http://open-nandra.com

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.