[PATCH v2 3/3] ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff.

[Andrew Lunn]

On Fri, Nov 16, 2012 at 08:32:50PM +0100, Simon Baatz wrote:
> Hi Andrew,
> 
> On Tue, Nov 13, 2012 at 04:44:45PM +0100, Andrew Lunn wrote:
> > Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> > ---
> >  arch/arm/boot/dts/kirkwood-ib62x0.dts |    6 ++++++
> >  arch/arm/mach-kirkwood/board-ib62x0.c |   13 -------------
> >  2 files changed, 6 insertions(+), 13 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
> > index 66794ed..9b0e2e3 100644
> > --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
> > +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
> > @@ -79,4 +79,10 @@
> >  			gpios = <&gpio0 27 0>;
> >  		};
> >  	};
> > +	gpio_poweroff {
> > +		compatible = "gpio-poweroff";
> > +		gpios = <&gpio0 24 1>;
> 
> This needs to be:
> 		gpios = <&gpio0 24 0>;

I also got it wrong on Jamie's board!

> 
> If the GPIO is configured as an input, the box shuts down when
> initializing the driver.
> 
> With this change:
> 
> Tested-by: Simon Baatz <gmbnomis at gmail.com>
> 
> Btw., I also tested it on top of your pinctrl changes, which works
> like a charm as well.

Thanks for testing that.

       Andrew