[PATCH] ARM: implement optimized percpu variable access

[Rob Herring]

On 11/27/2012 11:19 AM, Nicolas Pitre wrote:
> On Sat, 10 Nov 2012, Rob Herring wrote:
> 
>> From: Rob Herring <rob.herring at calxeda.com>
>>
>> Use the previously unused TPIDRPRW register to store percpu offsets.
>> TPIDRPRW is only accessible in PL1, so it can only be used in the kernel.
>>
>> This saves 2 loads for each percpu variable access which should yield
>> improved performance, but the improvement has not been quantified.
>>
>> Signed-off-by: Rob Herring <rob.herring at calxeda.com>
> 
> I've just got around to wrap my brain around this patch and the 
> discussion that ensued.
> 
> Isn't your patch lacking the preserving and restoring of the TPIDRPRW in 
> the suspend and resume paths.

Why yes, you are right. And I noticed the v6 save/restore is missing the
user thread ID for v6K as well. I haven't looked closer, but perhaps it
is never used.

Rob
> 
>> ---
>>  arch/arm/include/asm/Kbuild   |    1 -
>>  arch/arm/include/asm/percpu.h |   44 +++++++++++++++++++++++++++++++++++++++++
>>  arch/arm/kernel/smp.c         |    3 +++
>>  3 files changed, 47 insertions(+), 1 deletion(-)
>>  create mode 100644 arch/arm/include/asm/percpu.h
>>
>> diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
>> index f70ae17..2ffdaac 100644
>> --- a/arch/arm/include/asm/Kbuild
>> +++ b/arch/arm/include/asm/Kbuild
>> @@ -16,7 +16,6 @@ generic-y += local64.h
>>  generic-y += msgbuf.h
>>  generic-y += param.h
>>  generic-y += parport.h
>> -generic-y += percpu.h
>>  generic-y += poll.h
>>  generic-y += resource.h
>>  generic-y += sections.h
>> diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
>> new file mode 100644
>> index 0000000..9eb7372
>> --- /dev/null
>> +++ b/arch/arm/include/asm/percpu.h
>> @@ -0,0 +1,44 @@
>> +/*
>> + * Copyright 2012 Calxeda, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#ifndef _ASM_ARM_PERCPU_H_
>> +#define _ASM_ARM_PERCPU_H_
>> +
>> +/*
>> + * Same as asm-generic/percpu.h, except that we store the per cpu offset
>> + * in the TPIDRPRW.
>> + */
>> +#if defined(CONFIG_SMP) && (__LINUX_ARM_ARCH__ >= 6)
>> +
>> +static inline void set_my_cpu_offset(unsigned long off)
>> +{
>> +	asm volatile("mcr p15, 0, %0, c13, c0, 4	@ set TPIDRPRW" : : "r" (off) : "cc" );
>> +}
>> +
>> +static inline unsigned long __my_cpu_offset(void)
>> +{
>> +	unsigned long off;
>> +	asm("mrc p15, 0, %0, c13, c0, 4	@ get TPIDRPRW" : "=r" (off) : );
>> +	return off;
>> +}
>> +#define __my_cpu_offset __my_cpu_offset()
>> +#else
>> +#define set_my_cpu_offset(x)	do {} while(0)
>> +
>> +#endif /* CONFIG_SMP */
>> +
>> +#include <asm-generic/percpu.h>
>> +
>> +#endif /* _ASM_ARM_PERCPU_H_ */
>> diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
>> index fbc8b26..897ef60 100644
>> --- a/arch/arm/kernel/smp.c
>> +++ b/arch/arm/kernel/smp.c
>> @@ -313,6 +313,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
>>  	current->active_mm = mm;
>>  	cpumask_set_cpu(cpu, mm_cpumask(mm));
>>  
>> +	set_my_cpu_offset(per_cpu_offset(cpu));
>> +
>>  	printk("CPU%u: Booted secondary processor\n", cpu);
>>  
>>  	cpu_init();
>> @@ -371,6 +373,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
>>  
>>  void __init smp_prepare_boot_cpu(void)
>>  {
>> +	set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
>>  }
>>  
>>  void __init smp_prepare_cpus(unsigned int max_cpus)
>> -- 
>> 1.7.10.4
>>