[PATCH RESEND v5 0/4] OMAP GPMC DT bindings

Philip, Avinash avinashphilip at ti.com
Thu Nov 29 00:24:36 EST 2012


On Wed, Nov 28, 2012 at 22:28:55, Daniel Mack wrote:
> [Resending +devicetree-discuss, +Rob, +Grant]
> 
> 
> This is a series of patches to support GPMC peripherals on OMAP boards.
> 
> Depends on Linus' master +
> omap-next (branch omap-for-v3.8/cleanup-headers-gpmc)

Can you resend this series on top of linux_next?
Some of the missing items I seen 
1. Of_node not populated in  omap_nand_platform_data structure.
2. Remove platform device creation from hwmod as GPMC DT is populating.
   Currently GPMC device creaing from DT & HWMOD.

Also can you address how this patch series depends on
mtd: nand: OMAP: ELM error correction support for BCH ecc

Thanks
Avinash

> 
> The only supported peripheral for now is NAND, but other types would be
> easy to add.
> 
> Version 2 addresses details pointed out by Jon Hunter, Afzal Mohammed
> and Rob Herring:
> 
>  - add "reg" and "ti,hwmod" properties to Documentation
>  - use generic of_mtd functions and the property names defined by them,
>    namely "nand-bus-width" and "nand-ecc-mode"
>  - reduce the default register space size in the Documentation to 8K,
>    as found in the hwmod code
>  - switch to a DT layout based on ranges and address translation.
>    Although this property is not currently looked at as long as the
>    handling code still uses the runtime calculation methods, we now
>    have these values in the bindings, eventually allowing us to
>    switch the implementation with less pain.
> 
> Version 3 includes fixes pointed out by Jon Hunter:
> 
>  - better documentation of the 'ranges' property to describe the
>    fact that it's representing the CS lines
>  - GPMC_CS_CONFIGx -> GPMC_CONFIGx in comments
>  - drop interrupt-parent from example bindings
>  - add of_node_put() at the end of the child iteration
> 
> Version 4 fixes compilation for !CONFIG_MTD_NAND and includes more
> details from Jon Hunter and Avinash, Philip:
> 
>  - Add "num-cs" and "num-waitpins" properties, which will eventually
>    be used to get rid of GPMC_CS_NUM
>  - Better description of generic nand DT properties
>  - Dropped patch 3/4 as an equivalent fix was already merged
>  - Added ti,nand-ecc-use-elm property
> 
> Version 5 with regards to Avinash, Philip and Peter Korsgaard:
> 
>  - Re-add accidentially forgotten
>    Documentation/devicetree/bindings/bus/ti-gpmc.txt
>  - Rename "software" ecc mode to "sw"
>  - Initialize gpmc_nand_data->is_elm_used to 'true' rather than 1
>  - Drop ti,nand-ecc-use-elm binding in favor of a new ecc mode
>    named "bch8-am335xrbl-compatible"
>  - Add two more patches for section mismatch fixups
> 
> Daniel Mack (4):
>   mtd: omap-nand: pass device_node in platform data
>   ARM: OMAP: gpmc-nand: drop __init annotation
>   ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs
>   ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
> 
>  Documentation/devicetree/bindings/bus/ti-gpmc.txt  |  76 +++++++++
>  .../devicetree/bindings/mtd/gpmc-nand.txt          |  81 +++++++++
>  arch/arm/mach-omap2/gpmc-nand.c                    |  15 +-
>  arch/arm/mach-omap2/gpmc.c                         | 181 ++++++++++++++++++++-
>  drivers/mtd/nand/omap2.c                           |   4 +-
>  5 files changed, 348 insertions(+), 9 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/bus/ti-gpmc.txt
>  create mode 100644 Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> 
> -- 
> 1.7.11.7
> 
> 




More information about the linux-arm-kernel mailing list