[PATCH 5/9] usb: add phy connection by phy-mode

[Alexander Shishkin]

Michael Grzeschik <m.grzeschik at pengutronix.de> writes:

> This patch makes it possible to set the connection of the usbphy to the
> soc. It is derived from the oftree bindings for the ethernetphy and adds
> similar helperfunctions.
>
> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
> ---
>  drivers/of/Kconfig        |    4 ++++
>  drivers/of/Makefile       |    1 +
>  drivers/of/of_usbphy.c    |   49 +++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/of_usbphy.h |   15 ++++++++++++++
>  include/linux/usb/phy.h   |    8 ++++++++
>  5 files changed, 77 insertions(+)
>  create mode 100644 drivers/of/of_usbphy.c
>  create mode 100644 include/linux/of_usbphy.h

This looks a bit like Felipe's call, cc'ing him.

>
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index dfba3e6..28f99fb 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -67,6 +67,10 @@ config OF_MDIO
>  	help
>  	  OpenFirmware MDIO bus (Ethernet PHY) accessors
>  
> +config OF_USBPHY
> +	depends on USB
> +	def_bool y
> +
>  config OF_PCI
>  	def_tristate PCI
>  	depends on PCI
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index e027f44..fdcaf51 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_OF_IRQ)    += irq.o
>  obj-$(CONFIG_OF_DEVICE) += device.o platform.o
>  obj-$(CONFIG_OF_I2C)	+= of_i2c.o
>  obj-$(CONFIG_OF_NET)	+= of_net.o
> +obj-$(CONFIG_OF_USBPHY)	+= of_usbphy.o
>  obj-$(CONFIG_OF_SELFTEST) += selftest.o
>  obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
>  obj-$(CONFIG_OF_PCI)	+= of_pci.o
> diff --git a/drivers/of/of_usbphy.c b/drivers/of/of_usbphy.c
> new file mode 100644
> index 0000000..2e71f7b
> --- /dev/null
> +++ b/drivers/of/of_usbphy.c
> @@ -0,0 +1,49 @@
> +/*
> + * OF helpers for network devices.
> + *
> + * This file is released under the GPLv2
> + *
> + * Initially copied out of drivers/of/of_net.c
> + */
> +#include <linux/etherdevice.h>
> +#include <linux/kernel.h>
> +#include <linux/of_usbphy.h>
> +#include <linux/usb/phy.h>
> +#include <linux/export.h>
> +
> +/**
> + * It maps 'enum usb_phy_interface' found in include/linux/usb/phy.h
> + * into the device tree binding of 'phy-mode', so that USB
> + * device driver can get phy interface from device tree.
> + */
> +static const char *usbphy_modes[] = {
> +	[USBPHY_INTERFACE_MODE_NA]	= "",
> +	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
> +	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmiw",
> +	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
> +	[USBPHY_INTERFACE_MODE_SERIAL]	= "fsls",
> +};
> +
> +/**
> + * of_get_phy_mode - Get phy mode for given device_node
> + * @np:	Pointer to the given device_node
> + *
> + * The function gets phy interface string from property 'phy-mode',
> + * and return its index in phy_modes table, or errno in error case.
> + */
> +const int of_get_usbphy_mode(struct device_node *np)
> +{
> +	const char *pm;
> +	int err, i;
> +
> +	err = of_property_read_string(np, "phy-mode", &pm);
> +	if (err < 0)
> +		return err;
> +
> +	for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
> +		if (!strcasecmp(pm, usbphy_modes[i]))
> +			return i;
> +
> +	return -ENODEV;
> +}
> +EXPORT_SYMBOL_GPL(of_get_usbphy_mode);
> diff --git a/include/linux/of_usbphy.h b/include/linux/of_usbphy.h
> new file mode 100644
> index 0000000..9a4132d
> --- /dev/null
> +++ b/include/linux/of_usbphy.h
> @@ -0,0 +1,15 @@
> +/*
> + * OF helpers for usb devices.
> + *
> + * This file is released under the GPLv2
> + */
> +
> +#ifndef __LINUX_OF_USBPHY_H
> +#define __LINUX_OF_USBPHY_H
> +
> +#ifdef CONFIG_OF_USBPHY
> +#include <linux/of.h>
> +extern const int of_get_usbphy_mode(struct device_node *np);
> +#endif
> +
> +#endif /* __LINUX_OF_USBPHY_H */
> diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
> index a29ae1e..150eb69 100644
> --- a/include/linux/usb/phy.h
> +++ b/include/linux/usb/phy.h
> @@ -12,6 +12,14 @@
>  #include <linux/notifier.h>
>  #include <linux/usb.h>
>  
> +enum usb_phy_interface {
> +	USBPHY_INTERFACE_MODE_NA,
> +	USBPHY_INTERFACE_MODE_UTMI,
> +	USBPHY_INTERFACE_MODE_UTMIW,
> +	USBPHY_INTERFACE_MODE_ULPI,
> +	USBPHY_INTERFACE_MODE_SERIAL,
> +};
> +
>  enum usb_phy_events {
>  	USB_EVENT_NONE,         /* no events or cable disconnected */
>  	USB_EVENT_VBUS,         /* vbus valid event */
> -- 
> 1.7.10.4