[PATCH 3/5] ARM: at91sam9: add macb pinctrl support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Tue Nov 20 16:31:41 EST 2012
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/boot/dts/at91sam9260.dtsi | 42 ++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9263.dtsi | 30 ++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 30 ++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9x25.dtsi | 21 ++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 30 ++++++++++++++++++++++++++
5 files changed, 153 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 9a24ffb..36f55e3 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -216,6 +216,46 @@
};
};
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <0 12 0x1 0x0 /* PA12 periph A */
+ 0 13 0x1 0x0 /* PA13 periph A */
+ 0 14 0x1 0x0 /* PA14 periph A */
+ 0 15 0x1 0x0 /* PA15 periph A */
+ 0 16 0x1 0x0 /* PA16 periph A */
+ 0 17 0x1 0x0 /* PA17 periph A */
+ 0 18 0x1 0x0 /* PA18 periph A */
+ 0 19 0x1 0x0 /* PA19 periph A */
+ 0 20 0x1 0x0 /* PA20 periph A */
+ 0 21 0x1 0x0>; /* PA21 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <0 22 0x2 0x0 /* PA22 periph B */
+ 0 23 0x2 0x0 /* PA23 periph B */
+ 0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0 /* PA26 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+
+ pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+ atmel,pins =
+ <0 10 0x2 0x0 /* PA10 periph B */
+ 0 11 0x2 0x0 /* PA11 periph B */
+ 0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0 /* PA26 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -326,6 +366,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffc4000 0x100>;
interrupts = <21 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 251ccec..148b89a 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -163,6 +163,34 @@
};
};
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <2 25 0x2 0x0 /* PC25 periph B */
+ 4 21 0x1 0x0 /* PE21 periph A */
+ 4 23 0x1 0x0 /* PE23 periph A */
+ 4 24 0x1 0x0 /* PE24 periph A */
+ 4 25 0x1 0x0 /* PE25 periph A */
+ 4 26 0x1 0x0 /* PE26 periph A */
+ 4 27 0x1 0x0 /* PE27 periph A */
+ 4 28 0x1 0x0 /* PE28 periph A */
+ 4 29 0x1 0x0 /* PE29 periph A */
+ 4 30 0x1 0x0>; /* PE30 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <2 20 0x2 0x0 /* PC20 periph B */
+ 2 21 0x2 0x0 /* PC21 periph B */
+ 2 22 0x2 0x0 /* PC22 periph B */
+ 2 23 0x2 0x0 /* PC23 periph B */
+ 2 24 0x2 0x0 /* PC24 periph B */
+ 2 25 0x2 0x0 /* PC25 periph B */
+ 2 27 0x2 0x0 /* PC27 periph B */
+ 4 22 0x2 0x0>; /* PE22 periph B */
+ };
+ };
+
pioA: gpio at fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -260,6 +288,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <21 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index c340f66..0ad84b6 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -196,6 +196,34 @@
};
};
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <0 10 0x1 0x0 /* PA10 periph A */
+ 0 11 0x1 0x0 /* PA11 periph A */
+ 0 12 0x1 0x0 /* PA12 periph A */
+ 0 13 0x1 0x0 /* PA13 periph A */
+ 0 14 0x1 0x0 /* PA14 periph A */
+ 0 15 0x1 0x0 /* PA15 periph A */
+ 0 16 0x1 0x0 /* PA16 periph A */
+ 0 17 0x1 0x0 /* PA17 periph A */
+ 0 18 0x1 0x0 /* PA18 periph A */
+ 0 19 0x1 0x0>; /* PA19 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <0 6 0x2 0x0 /* PA6 periph B */
+ 0 7 0x2 0x0 /* PA7 periph B */
+ 0 8 0x2 0x0 /* PA8 periph B */
+ 0 9 0x2 0x0 /* PA9 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0 /* PA29 periph B */
+ 0 30 0x2 0x0>; /* PA30 periph B */
+ };
+ };
+
pioA: gpio at fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -304,6 +332,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <25 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 956c65f..54eb33b 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -22,6 +22,27 @@
0x80000000 0xfffd0000 0xb83fffff /* pioC */
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
+
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <2 16 0x2 0x0 /* PC16 periph B */
+ 2 18 0x2 0x0 /* PC18 periph B */
+ 2 19 0x2 0x0 /* PC19 periph B */
+ 2 20 0x2 0x0 /* PC20 periph B */
+ 2 21 0x2 0x0 /* PC21 periph B */
+ 2 27 0x2 0x0 /* PC27 periph B */
+ 2 28 0x2 0x0 /* PC28 periph B */
+ 2 29 0x2 0x0 /* PC29 periph B */
+ 2 30 0x2 0x0 /* PC30 periph B */
+ 2 31 0x2 0x0>; /* PC31 periph B */
+ };
+ };
+ };
+
+ macb1: ethernet at f8030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 6a40b77..9fd7159 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -206,6 +206,34 @@
};
};
+ macb0 {
+ pinctrl_macb0_rmii: macb0_rmii-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A */
+ 1 1 0x1 0x0 /* PB1 periph A */
+ 1 2 0x1 0x0 /* PB2 periph A */
+ 1 3 0x1 0x0 /* PB3 periph A */
+ 1 4 0x1 0x0 /* PB4 periph A */
+ 1 5 0x1 0x0 /* PB5 periph A */
+ 1 6 0x1 0x0 /* PB6 periph A */
+ 1 7 0x1 0x0 /* PB7 periph A */
+ 1 9 0x1 0x0 /* PB9 periph A */
+ 1 10 0x1 0x0>; /* PB10 periph A */
+ };
+
+ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+ atmel,pins =
+ <1 8 0x1 0x0 /* PA8 periph A */
+ 1 11 0x1 0x0 /* PA11 periph A */
+ 1 12 0x1 0x0 /* PA12 periph A */
+ 1 13 0x1 0x0 /* PA13 periph A */
+ 1 14 0x1 0x0 /* PA14 periph A */
+ 1 15 0x1 0x0 /* PA15 periph A */
+ 1 16 0x1 0x0 /* PA16 periph A */
+ 1 17 0x1 0x0>; /* PA17 periph A */
+ };
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -295,6 +323,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <24 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii>;
status = "disabled";
};
--
1.7.10.4
More information about the linux-arm-kernel
mailing list