[PATCH] ARM: EXYNOS: Add support for ORIGEN4QUAD board

[Tushar Behera]

On 11/19/2012 10:54 PM, chlrbgh0 at gmail.com wrote:
> From: Kyuho Choi <kh.choi at insignal.co.kr>
> 
> This patch add support for Insignal ORIGEN4QUAD board.
> ORIGEN4QUAD board based on Samsung Exynos4412 SoC.
> 
> Signed-off-by: Kyuho Choi <kh.choi at insignal.co.kr>
> ---
>  arch/arm/mach-exynos/Kconfig       |    1 +
>  arch/arm/mach-exynos/mach-origen.c |   74 +++++++++++++++++++++++++++--------
>  2 files changed, 58 insertions(+), 17 deletions(-)
> 

Since Origen and Origen4Quad boards have different peripherals
(different pmic chip, touch/audio on different I2C bus etc.), how do you
plan to add them to mach-origen.c?


> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index bb3b09a..0b8ccd3 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -324,6 +324,7 @@ config MACH_NURI
>  config MACH_ORIGEN
>  	bool "ORIGEN"
>  	select CPU_EXYNOS4210
> +	select SOC_EXYNOS4412
>  	select EXYNOS4_DEV_USB_OHCI
>  	select EXYNOS4_SETUP_FIMD0
>  	select EXYNOS4_SETUP_SDHCI
> diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
> index e6f4191..2839724 100644
> --- a/arch/arm/mach-exynos/mach-origen.c
> +++ b/arch/arm/mach-exynos/mach-origen.c
> @@ -1,6 +1,6 @@
>  /* linux/arch/arm/mach-exynos4/mach-origen.c
>   *
> - * Copyright (c) 2011 Insignal Co., Ltd.
> + * Copyright (c) 2011-2012 Insignal Co., Ltd.
>   *		http://www.insignal.co.kr/
>   *
>   * This program is free software; you can redistribute it and/or modify
> @@ -771,19 +771,36 @@ static void __init origen_reserve(void)
>  	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
>  }
>  
> -static void __init origen_machine_init(void)
> +static int __init origen4quad_i2c_init(void)
>  {
> -	origen_power_init();
> +	/*
> +	 * Origen4Quad has weaknees drive strength in i2c channel 3.
> +	 * thus here setup i2c3's drvstr for Origen4Quad.
> +	 */
> +	s5p_gpio_set_drvstr(EXYNOS4_GPA1(2), 3);
> +	s5p_gpio_set_drvstr(EXYNOS4_GPA1(3), 3);
> +	return 0;
> +}
>  
> -	s3c_i2c0_set_platdata(NULL);
> -	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
> +static int __init origen4quad_usb_init(void)
> +{
> +	/* USB HUB controller's hub reset pin setup for Origen4Quad. */
> +	gpio_request(EXYNOS4_GPX3(5), "GPX3");
> +	gpio_direction_output(EXYNOS4_GPX3(5), 1);
> +	gpio_set_value(EXYNOS4_GPX3(5), S3C_GPIO_PULL_UP);
> +	gpio_free(EXYNOS4_GPX3(5));
> +	return 0;
> +}
>  
> +static void __init origen_machine_init(void)
> +{
>  	/*
> -	 * Since sdhci instance 2 can contain a bootable media,
> -	 * sdhci instance 0 is registered after instance 2.
> +	 * Common initialize code for ORIGEN and Origen4Quad.
>  	 */
> +	s3c_i2c0_set_platdata(NULL);
> +	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
> +
>  	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
> -	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
>  
>  	origen_ehci_init();
>  	origen_ohci_init();
> @@ -793,22 +810,45 @@ static void __init origen_machine_init(void)
>  	s5p_i2c_hdmiphy_set_platdata(NULL);
>  	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
>  
> -#ifdef CONFIG_DRM_EXYNOS
> -	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
> -	exynos4_fimd0_gpio_setup_24bpp();
> -#else
> -	s5p_fimd0_set_platdata(&origen_lcd_pdata);
> -#endif
> +	pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
>  
>  	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
>  
> -	pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
> -	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
> +	if (!soc_is_exynos4210()) {
> +		/*
> +		 * In case of soc_is_4210(),
> +		 * Machine initialize for Origen.
> +		 */
>  
> -	origen_bt_setup();
> +		origen_power_init();
> +
> +		/*
> +		 * Since sdhci instance 2 can contain a bootable media,
> +		 * sdhci instance 0 is registered after instance 2.
> +		 */
> +		s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
> +
> +#ifdef CONFIG_DRM_EXYNOS
> +		s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
> +		exynos4_fimd0_gpio_setup_24bpp();
> +#else
> +		s5p_fimd0_set_platdata(&origen_lcd_pdata);
> +#endif
> +		samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
> +
> +		origen_bt_setup();
> +	} else{
> +		/*
> +		 * In case of soc_is_4412(),
> +		 * Machine initialize for Origen4Quad.
> +		 */
> +		origen4quad_i2c_init();
> +		origen4quad_usb_init();
> +	}
>  }
>  
>  MACHINE_START(ORIGEN, "ORIGEN")
> +	/* Maintainer: Kyuho Choi <kh.choi at insignal.co.kr> */
>  	/* Maintainer: JeongHyeon Kim <jhkim at insignal.co.kr> */
>  	.atag_offset	= 0x100,
>  	.smp		= smp_ops(exynos_smp_ops),
> 


-- 
Tushar Behera