[PATCH 6/7] ARM: sunxi: Add device tree for the A13 and the Olinuxino board

[Maxime Ripard]

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/boot/dts/Makefile            |    1 +
 arch/arm/boot/dts/sun5i-olinuxino.dts |   26 ++++++++++++
 arch/arm/boot/dts/sun5i.dtsi          |   74 +++++++++++++++++++++++++++++++++
 3 files changed, 101 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun5i-olinuxino.dts
 create mode 100644 arch/arm/boot/dts/sun5i.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9f..9b2d3f0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear310-evb.dtb \
 	spear320-evb.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun5i-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts
new file mode 100644
index 0000000..3b1cce3
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-olinuxino.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i.dtsi"
+
+/ {
+	model = "Olimex A13-Olinuxino";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
+
+	soc {
+		duart: uart at 01c28400 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
new file mode 100644
index 0000000..4bedf3e
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu at 0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x01c20000 0x300000>;
+		ranges;
+
+		timer at 01c20c00 {
+			compatible = "allwinner,sunxi-timer";
+			reg = <0x01c20c00 0x400>;
+			interrupts = <22>;
+			clocks = <&osc>;
+		};
+
+		intc: interrupt-controller at 01c20400 {
+			compatible = "allwinner,sunxi-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: uart at 01c28400 {
+			compatible = "ns8250";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			clock-frequency = <24000000>;
+			status = "disabled";
+		};
+	};
+};
-- 
1.7.9.5