[PATCH 1/3] ARM i.MX6: rename PLLs according to datasheet

[Sascha Hauer]

In recent reference manuals the PLLs were renumbered. PLL8 now is
PLL6 and vice versa. Change the code according to the reference
manual to avoid confusion.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 Documentation/devicetree/bindings/clock/imx6q-clock.txt |    4 ++--
 arch/arm/mach-imx/clk-imx6q.c                           |    8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 492bd99..bb71d4f 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -187,9 +187,9 @@ clocks and IDs.
 	pll3_usb_otg		172
 	pll4_audio		173
 	pll5_video		174
-	pll6_mlb		175
+	pll8_mlb		175
 	pll7_usb_host		176
-	pll8_enet		177
+	pll6_enet		177
 	ssi1_ipg		178
 	ssi2_ipg		179
 	ssi3_ipg		180
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 3ec242f..4066365 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -151,7 +151,7 @@ enum mx6q_clks {
 	gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
-	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
+	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	clk_max
 };
@@ -195,9 +195,9 @@ int __init mx6q_clocks_init(void)
 	clk[pll3_usb_otg]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x2000,   0x3);
 	clk[pll4_audio]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x2000,   0x7f);
 	clk[pll5_video]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x2000,   0x7f);
-	clk[pll6_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll6_mlb",	"osc", base + 0xd0, 0x2000,   0x0);
+	clk[pll6_enet]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x182000, 0x3);
 	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x2000,   0x3);
-	clk[pll8_enet]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll8_enet",	"osc", base + 0xe0, 0x182000, 0x3);
+	clk[pll8_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll8_mlb",	"osc", base + 0xd0, 0x2000,   0x0);
 
 	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
 	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
@@ -357,7 +357,7 @@ int __init mx6q_clocks_init(void)
 	clk[ldb_di1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
 	clk[ipu2_di1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
 	clk[hsi_tx]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
-	clk[mlb]          = imx_clk_gate2("mlb",           "pll6_mlb",          base + 0x74, 18);
+	clk[mlb]          = imx_clk_gate2("mlb",           "pll8_mlb",          base + 0x74, 18);
 	clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
 	clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
 	clk[ocram]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
-- 
1.7.10.4