[PATCH 1/4] ARM: sunxi: Restructure sunxi dts/dtsi files

[Stefan Roese]

For the new sun4i/Cubieboard (A10) support, lets re-strucure the
sun5i dts files to make it more generic. Those are the new
dts/dtsi files:

sunxi.dtsi - Devices common to all Allwinner sunXi SoC's
sun4i.dtsi - sun4i Devices, will include sunxi.dtsi
sun5i.dtsi - sun5i Devices, will include sunxi.dtsi
board.dts - will include either sun4i.dtsi or sun5i.dtsi

Additionally the "duart" label in the olinuxino.dts is changed to
"uart1".

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
Cc: Arnd Bergmann <arnd at arndb.de>
---
 arch/arm/boot/dts/sun5i-olinuxino.dts |  6 +++-
 arch/arm/boot/dts/sun5i.dtsi          | 56 +----------------------------
 arch/arm/boot/dts/sunxi.dtsi          | 66 +++++++++++++++++++++++++++++++++++
 3 files changed, 72 insertions(+), 56 deletions(-)
 create mode 100644 arch/arm/boot/dts/sunxi.dtsi

diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts
index 3b1cce3..d6ff889 100644
--- a/arch/arm/boot/dts/sun5i-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-olinuxino.dts
@@ -18,8 +18,12 @@
 	model = "Olimex A13-Olinuxino";
 	compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
 
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
 	soc {
-		duart: uart at 01c28400 {
+		uart1: uart at 01c28400 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 4bedf3e..59a2d26 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -11,64 +11,10 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+/include/ "sunxi.dtsi"
 
 / {
-	interrupt-parent = <&intc>;
-
-	cpus {
-		cpu at 0 {
-			compatible = "arm,cortex-a8";
-		};
-	};
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
 	memory {
 		reg = <0x40000000 0x20000000>;
 	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
-		ranges;
-
-		timer at 01c20c00 {
-			compatible = "allwinner,sunxi-timer";
-			reg = <0x01c20c00 0x400>;
-			interrupts = <22>;
-			clocks = <&osc>;
-		};
-
-		intc: interrupt-controller at 01c20400 {
-			compatible = "allwinner,sunxi-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		uart1: uart at 01c28400 {
-			compatible = "ns8250";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			clock-frequency = <24000000>;
-			status = "disabled";
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
new file mode 100644
index 0000000..9e476de
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu at 0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x01c20000 0x300000>;
+		ranges;
+
+		timer at 01c20c00 {
+			compatible = "allwinner,sunxi-timer";
+			reg = <0x01c20c00 0x400>;
+			interrupts = <22>;
+			clocks = <&osc>;
+		};
+
+		intc: interrupt-controller at 01c20400 {
+			compatible = "allwinner,sunxi-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: uart at 01c28400 {
+			compatible = "ns8250";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			clock-frequency = <24000000>;
+			status = "disabled";
+		};
+	};
+};
-- 
1.8.0