[PATCH v4] Introduce irqchip infrastructure

[Rob Herring]

On 11/20/2012 04:00 PM, Thomas Petazzoni wrote:
> Hello,
> 
> Here is a set of patches that introduces a small irqchip
> infrastructure that allows the registration of irqchip drivers without
> having each of those drivers to expose a public API and header in
> include/linux/irqchip/, and moves a number of existing irqchip
> controller to this infrastructure.
> 
> This new version (detailed changelog below) provides a number of
> improvements: usage of a special link section to avoid the central
> registration in irqchip.{c,h} of all irqchip drivers, and addition of
> the GIC, VIC and Versatile FPGA IRQ drivers move, thanks to Rob
> Herring and Linus Walleij.
> 
> Remaining issues to solve:
> 
>  * Russell would like arch/arm/include/asm/hardware/vic.h and
>    arch/arm/include/asm/hardware/gic.h to move elsewhere, since the
>    corresponding code is no longer in arch/arm/. I can move them in
>    <linux/irqchip>, but that will cause a fairly large change as there
>    are a big number of users of those headers in arch/arm.

We need to do this. KVM will need the header as well, so we can't move
the register definitions out either.

>  * The arch/arm/include/asm/hardware/vic.h has a few offset macros
>    that should move into the .c file of the irqchip driver, but some
>    of those offsets are bizarrely used in some other pieces of code in
>    arch/arm/.

Not really a good solution that I can see there. We could punt on doing
the VIC for now.

> 
>  * How to get rid entirely of the headers in <linux/irqchip/>. The
>    remaining problematic functions are <foo>_handle_irq() and
>    <foo>_irq_init() that are used by non-DT platforms. And the special
>    case of gic_cascade_irq().

I have patches for removing vic/gic_handle_irq. It is going to take a
while for the others, so I don't think we should wait for that. KVM
needs the GIC header anyway.

>  * Move all the users of gic_of_init() to the irqchip mechanism
>    (Exynos, i.MX 6, MSM, OMAP, SH Mobile, socfpga, spear13xx, tegra,
>    ux500, vexpress) so that gic_of_init() no longer has to be
>    exported.

I have a patch doing this. I will try to get this sent out today. I've
split this into clean-up and then the move, so the clean-up could go in
for 3.8. It is only dependent on patch 2.

> Of course, I don't expect any of this to go in 3.8, it is 3.9 material
> if we manage to reach a consensus on the remaining issues to solve
> (and the other issues that will certainly show up or be raised by
> other people).

I still would like to try to get this in for 3.8. If not the move, some
of the clean-up.

Rob

> 
> This series has been built and boot tested for BCM2835 and Armada
> XP. It has been built tested on Versatile with OF and without OF,
> spear3xx, spear6xx and a multi_v6_v7 configuration with all possible
> architectures enabled (therefore including picoxcell).
> 
> Changes since v3:
> 
>  * Switch to a link-trick based registration of the irqchip drivers,
>    using the IRQCHIP_DECLARE() macro.
> 
>  * Integrate Rob Herring's patches to move the GIC and VIC irq
>    controller drivers in drivers/irqchip/.
> 
>  * Migrate picoxcell, spear3xx and spear6xx to using the irqchip
>    platform, so that no direct user of vic_of_init() remains.
> 
>  * Don't export vic_of_init() anymore: all users go through
>    irqchip_init() now.
> 
>  * Integrate Linus Walleij patch that moves the Versatile FPGA irq
>    controller driver to drivers/irqchip.
> 
>  * A set_handle_irq() ARM function was added to properly set the
>    handle_arch_irq pointer to the right handler of the parent IRQ
>    controller.
> 
> Changes since v2:
> 
>  * Fixed the entry in the MAINTAINERS file. Noticed by Rob Herring.
> 
>  * Simplified the Kconfig logic by making the IRQCHIP option enabled
>    by default as soon as OF_IRQ is enabled. The individual ARCH_<foo>
>    Kconfig options no longer have to select IRQCHIP. Also, the option
>    was renamed from USE_IRQCHIP to just IRQCHIP. Suggested by Rob
>    Herring.
> 
>  * Added Reviewed-by tags given by Rob Herring.
> 
> Changes since v1:
> 
>  * Add a new patch mentionning the drivers/irqchip in the list of
>    directories part of the IRQ subsystem maintained by Thomas Gleixner
>    in the MAINTAINERS file. Requested by Arnd Bergmann.
> 
>  * Reduce the amount of code movement in the irq-bcm2835.c and
>    irq-armada-370-xp.c files by using one forward declaration for the
>    IRQ handling entry point. Requested by Stephen Warren.
> 
>  * Rename the armctrl_of_init() function to bcm2835_irqchip_init() as
>    requested by Stephen Warren.
> 
>  * Added the formal Acked-by and Reviewed-by received from Stephen
>    Warren.
> 
> Thanks,
> 
> Thomas
>