[PATCH V2 01/14] ARM: OMAP: Add DMTIMER definitions for posted mode

Jon Hunter jon-hunter at ti.com
Wed Nov 7 17:47:08 EST 2012



On 11/07/2012 04:18 PM, Santosh Shilimkar wrote:
> On Wednesday 07 November 2012 04:11 PM, Jon Hunter wrote:
>>
>> On 11/07/2012 04:04 PM, Santosh Shilimkar wrote:
>>> On Wednesday 07 November 2012 01:01 PM, Jon Hunter wrote:
>>>> For OMAP2+ devices, when using DMTIMERs for system timers
>>>> (clock-events and
>>>> clock-source) the posted mode configuration of the timers is used. To
>>>> allow
>>>> the compiler to optimise the functions for configuring and reading the
>>>> system
>>>> timers, the posted flag variable is hard-coded with the value 1. To
>>>> make it
>>>> clear that posted mode is being used add some definitions so that it
>>>> is more
>>>> readable.
>>>>
>>>> Add separate definitions for the clock-events and clock-source timers
>>>> so that
>>>> we can change the posted mode of clock-events and clock-source
>>>> independently.
>>>>
>>>> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
>>>> ---
>>>>    arch/arm/mach-omap2/timer.c               |   26
>>>> +++++++++++++++++++-------
>>>>    arch/arm/plat-omap/include/plat/dmtimer.h |    4 ++++
>>>>    2 files changed, 23 insertions(+), 7 deletions(-)
>>>>
>>>> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
>>>> index 0758bae..28c6078 100644
>>>> --- a/arch/arm/mach-omap2/timer.c
>>>> +++ b/arch/arm/mach-omap2/timer.c
>>>> @@ -82,6 +82,13 @@
>>>>    #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET        0x14
>>>>    #define NUMERATOR_DENUMERATOR_MASK            0xfffff000
>>>>
>>>> +/*
>>>> + * For clock-events timer, always use posted mode to
>>>> + * minimise CPU overhead for configuring the timer.
>>>> + */
>>>> +#define OMAP_CLKEVT_POSTEDMODE    OMAP_TIMER_POSTED
>>>> +#define OMAP_CLKSRC_POSTEDMODE    OMAP_TIMER_POSTED
>>>> +
>>> I don't see need of above defines. Just use OMAP_TIMER_POSTED directly
>>> with API. Rest of the patch looks fine.
>>
>> Yes that's possible, however, in patch #2, I am disabling posted mode
>> for clock-source (see changelog of patch #2 for details). Having these
>> #defines makes it easier to change the posted configuration. That was
>> the real motivation here.
>>
> Sure but that is more confusing because you are flipping
> the meaning of the macro. Better to specify direct
> argument to avoid the confusion.

Hmmm ... I guess I don't see it that way. The intent was that the
definitions OMAP_CLKxxx_POSTEDMODE described the posted configuration
(ie. posted or non-posted) and a user could change/flip it if so desired.

I can use the OMAP_TIMER_POSTED/NONPOSTED directly, but my concern with
that was if someone wanted to changed the posted mode then they have to
change it in multiple places and there is a chance they could miss one.
This way, as long as I have it right to begin with, then no one should
be able to screw it up :-)

Cheers
Jon



More information about the linux-arm-kernel mailing list