[PATCH v7 6/6] arm: mvebu: enable Ethernet controllers on OpenBlocks AX3-4 platform

[Thomas Petazzoni]

The PlatHome OpenBlocks AX3-4 platform has 4 Ethernet ports, connected
to a single quad-port PHY through SGMII.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts |   24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index cb86853..1a07e09 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -65,5 +65,29 @@
 				linux,default-trigger = "heartbeat";
 			};
 		};
+		ethernet at d0070000 {
+			clock-frequency = <250000000>;
+			status = "okay";
+			phy-mode = "sgmii";
+			phy-addr = <0>;
+		};
+		ethernet at d0074000 {
+			clock-frequency = <250000000>;
+			status = "okay";
+			phy-mode = "sgmii";
+			phy-addr = <1>;
+		};
+		ethernet at d0030000 {
+			clock-frequency = <250000000>;
+			status = "okay";
+			phy-mode = "sgmii";
+			phy-addr = <2>;
+		};
+		ethernet at d0034000 {
+			clock-frequency = <250000000>;
+			status = "okay";
+			phy-mode = "sgmii";
+			phy-addr = <3>;
+		};
 	};
 };
-- 
1.7.9.5