[PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver

Sekhar Nori nsekhar at ti.com
Sat Nov 3 08:35:10 EDT 2012


On 10/25/2012 9:41 PM, Murali Karicheri wrote:
> This is the common clk driver initialization functions for DaVinci
> SoCs and other SoCs that uses similar hardware architecture.
> clock.h also defines struct types for clock definitions in a SoC
> and clock data type for configuring clk-mux. The initialization
> functions are used by clock initialization code in a specific
> platform/SoC.
> 
> Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
> ---
>  drivers/clk/davinci/clock.c |  112 +++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/davinci/clock.h |   80 +++++++++++++++++++++++++++++++
>  2 files changed, 192 insertions(+)
>  create mode 100644 drivers/clk/davinci/clock.c
>  create mode 100644 drivers/clk/davinci/clock.h
> 
> diff --git a/drivers/clk/davinci/clock.c b/drivers/clk/davinci/clock.c
> new file mode 100644
> index 0000000..ad02149
> --- /dev/null
> +++ b/drivers/clk/davinci/clock.c
> @@ -0,0 +1,112 @@
> +/*
> + * clock.c - davinci clock initialization functions for various clocks
> + *
> + * Copyright (C) 2006-2012 Texas Instruments.
> + * Copyright (C) 2008-2009 Deep Root Systems, LLC
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/init.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +
> +#include "clk-pll.h"
> +#include "clk-psc.h"
> +#include "clk-div.h"
> +#include "clock.h"
> +
> +static DEFINE_SPINLOCK(_lock);
> +
> +#ifdef	CONFIG_CLK_DAVINCI_PLL
> +struct clk *davinci_pll_clk(const char *name, const char *parent,
> +		u32 phys_pllm, u32 phys_prediv, u32 phys_postdiv,
> +		struct clk_pll_data *pll_data)
> +{
> +	struct clk *clkp = NULL;
> +
> +	pll_data->reg_pllm = ioremap(phys_pllm, 4);
> +	if (WARN_ON(!pll_data->reg_pllm))
> +		return clkp;

I would prefer ERR_PTR(-ENOMEM) here. Same comment applies to other
instances elsewhere in the patch.

> diff --git a/drivers/clk/davinci/clock.h b/drivers/clk/davinci/clock.h
> new file mode 100644
> index 0000000..73204b8
> --- /dev/null
> +++ b/drivers/clk/davinci/clock.h
> @@ -0,0 +1,80 @@
> +/*
> + * TI DaVinci Clock definitions -  Contains Macros and Types used for
> + * defining various clocks on a DaVinci SoC
> + *
> + * Copyright (C) 2012 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +#ifndef __DAVINCI_CLOCK_H
> +#define __DAVINCI_CLOCK_H
> +
> +#include <linux/types.h>
> +
> +/* general flags: */
> +#define ALWAYS_ENABLED		BIT(0)

This is not used in this patch. Can you add the define along with its
usage so it is immediately clear why you need it?

> +/**
> + * struct davinci_clk - struct for defining DaVinci clocks for a SoC.
> + *
> + * @name: name of the clock
> + * @parent: name of parent clock
> + * @flags: General flags for all drivers used by platform clock init code
> + * @data: data specific to a clock used by the driver
> + * @dev_id: dev_id used to look up this clock. If this is NULL
> + *	clock name is used for lookup.
> + */
> +struct davinci_clk {
> +	const char			*name;
> +	const char			*parent;
> +	u32				flags;
> +	void				*data;
> +	char				*dev_id;

Similarly dont see this being used as well.

Thanks,
Sekhar



More information about the linux-arm-kernel mailing list