[PATCH 4/6] ARM: sunxi: Add earlyprintk support

[Stefan Roese]

On 11/15/2012 11:46 PM, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
>  arch/arm/Kconfig.debug         |    8 ++++++++
>  arch/arm/include/debug/sunxi.S |   22 ++++++++++++++++++++++
>  2 files changed, 30 insertions(+)
>  create mode 100644 arch/arm/include/debug/sunxi.S
> 
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index b0f3857..6672b02 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -345,6 +345,13 @@ choice
>  		  Say Y here if you want kernel low-level debugging support
>  		  on SOCFPGA based platforms.
>  
> +	config DEBUG_SUNXI_UART
> +		bool "Kernel low-level debugging messages via sunXi UART"
> +		depends on ARCH_SUNXI
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  on Allwinner A1X based platforms.
>
>  	config DEBUG_VEXPRESS_UART0_DETECT
>  		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
>  		depends on ARCH_VEXPRESS && CPU_CP15_MMU
> @@ -416,6 +423,7 @@ config DEBUG_LL_INCLUDE
>  	default "debug/mvebu.S" if DEBUG_MVEBU_UART
>  	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
>  	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
> +	default "debug/sunxi.S" if DEBUG_SUNXI_UART
>  	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
>  		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
>  	default "mach/debug-macro.S"
> diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S
> new file mode 100644
> index 0000000..ffd101f
> --- /dev/null
> +++ b/arch/arm/include/debug/sunxi.S
> @@ -0,0 +1,22 @@
> +/*
> + * Early serial output macro for Allwinner A1X SoCs
> + *
> + * Copyright (C) 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#define SUNXI_UART1_PHYS_BASE	0x01c28400
> +#define SUNXI_UART1_VIRT_BASE	0xf1c28400
> +
> +	.macro	addruart, rp, rv, tmp
> +	ldr	\rp, =SUNXI_UART1_PHYS_BASE
> +	ldr	\rv, =SUNXI_UART1_VIRT_BASE
> +	.endm
> +
> +#define UART_SHIFT	2
> +#include <asm/hardware/debug-8250.S>

A10 (cubieboard) has debug the UART on UART0 instead of UART1 as on A13.
So we need support this here as well. I suggest that I add support debug
on UART0 with my cubieboard patches.

So:

Acked-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan