[PATCH] fixup! cpufreq: SPEAr: Add CPUFreq driver
Rafael J. Wysocki
rjw at sisk.pl
Tue Nov 27 14:05:35 EST 2012
On Tuesday, November 27, 2012 06:01:39 PM Viresh Kumar wrote:
> Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
> ---
> Hi Rafael,
>
> To make review easier and faster, i am sending incremental patch for SPEAr
> cpufreq driver. This patch was earlier discussed here:
>
> http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/135088.html
Applied.
Thanks,
Rafael
> .../devicetree/bindings/cpufreq/cpufreq-spear.txt | 33 +++++++++++++++-------
> drivers/cpufreq/spear-cpufreq.c | 4 +--
> 2 files changed, 25 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
> index 4cf2819..f3d44984 100644
> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
> @@ -6,7 +6,6 @@ It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems
> which share clock across all CPUs.
>
> Required properties:
> -- compatible: "st,cpufreq-spear"
> - cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the
> increasing order.
>
> @@ -14,16 +13,30 @@ Optional properties:
> - clock-latency: Specify the possible maximum transition latency for clock, in
> unit of nanoseconds.
>
> +Both required and optional properties listed above must be defined under node
> +/cpus/cpu at 0.
> +
> Examples:
> --------
> +cpus {
> +
> + <...>
> +
> + cpu at 0 {
> + compatible = "arm,cortex-a9";
> + reg = <0>;
> +
> + <...>
> +
> + cpufreq_tbl = < 166000
> + 200000
> + 250000
> + 300000
> + 400000
> + 500000
> + 600000 >;
> + };
> +
> + <...>
>
> -cpufreq {
> - compatible = "st,cpufreq-spear";
> - cpufreq_tbl = < 166000
> - 200000
> - 250000
> - 300000
> - 400000
> - 500000
> - 600000 >;
> };
> diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c
> index a7fe880..4575cfe 100644
> --- a/drivers/cpufreq/spear-cpufreq.c
> +++ b/drivers/cpufreq/spear-cpufreq.c
> @@ -224,9 +224,9 @@ static int spear_cpufreq_driver_init(void)
> const __be32 *val;
> int cnt, i, ret;
>
> - np = of_find_compatible_node(NULL, NULL, "st,cpufreq-spear");
> + np = of_find_node_by_path("/cpus/cpu at 0");
> if (!np) {
> - pr_err("No cpufreq node found");
> + pr_err("No cpu node found");
> return -ENODEV;
> }
>
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
More information about the linux-arm-kernel
mailing list