[PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes
AnilKumar Ch
anilkumar at ti.com
Wed Nov 21 06:52:17 EST 2012
Rename I2C and GPIO nodes according to AM33XX TRM. According to
AM33XX TRM device instances are starting from "0" like i2c0, i2c1
and i2c3.
Signed-off-by: Pantelis Antoniou <panto at antoniou-consulting.com>
[panto at antoniou-consulting.com: initial patch by pantelis's]
Signed-off-by: AnilKumar Ch <anilkumar at ti.com>
---
Changes from first version:
- Updated pantelis's patch
* Modified based on linux-omap/master
* Added GPIO nodes renaming as well
arch/arm/boot/dts/am335x-bone.dts | 10 +++++-----
arch/arm/boot/dts/am335x-evm.dts | 18 +++++++++---------
arch/arm/boot/dts/am335x-evmsk.dts | 18 +++++++++---------
arch/arm/boot/dts/am33xx.dtsi | 14 +++++++-------
4 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 2c33888..77b4352 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -43,7 +43,7 @@
status = "okay";
};
- i2c1: i2c at 44e0b000 {
+ i2c0: i2c at 44e0b000 {
status = "okay";
clock-frequency = <400000>;
@@ -59,27 +59,27 @@
led at 2 {
label = "beaglebone:green:heartbeat";
- gpios = <&gpio2 21 0>;
+ gpios = <&gpio1 21 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led at 3 {
label = "beaglebone:green:mmc0";
- gpios = <&gpio2 22 0>;
+ gpios = <&gpio1 22 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led at 4 {
label = "beaglebone:green:usr2";
- gpios = <&gpio2 23 0>;
+ gpios = <&gpio1 23 0>;
default-state = "off";
};
led at 5 {
label = "beaglebone:green:usr3";
- gpios = <&gpio2 24 0>;
+ gpios = <&gpio1 24 0>;
default-state = "off";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 9f65f17..705a9c5 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -51,7 +51,7 @@
status = "okay";
};
- i2c1: i2c at 44e0b000 {
+ i2c0: i2c at 44e0b000 {
status = "okay";
clock-frequency = <400000>;
@@ -60,7 +60,7 @@
};
};
- i2c2: i2c at 4802a000 {
+ i2c1: i2c at 4802a000 {
status = "okay";
clock-frequency = <100000>;
@@ -123,12 +123,12 @@
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
- row-gpios = <&gpio2 25 0 /* Bank1, pin25 */
- &gpio2 26 0 /* Bank1, pin26 */
- &gpio2 27 0>; /* Bank1, pin27 */
+ row-gpios = <&gpio1 25 0 /* Bank1, pin25 */
+ &gpio1 26 0 /* Bank1, pin26 */
+ &gpio1 27 0>; /* Bank1, pin27 */
- col-gpios = <&gpio2 21 0 /* Bank1, pin21 */
- &gpio2 22 0>; /* Bank1, pin22 */
+ col-gpios = <&gpio1 21 0 /* Bank1, pin21 */
+ &gpio1 22 0>; /* Bank1, pin22 */
linux,keymap = <0x0000008b /* MENU */
0x0100009e /* BACK */
@@ -147,14 +147,14 @@
switch at 9 {
label = "volume-up";
linux,code = <115>;
- gpios = <&gpio1 2 1>;
+ gpios = <&gpio0 2 1>;
gpio-key,wakeup;
};
switch at 10 {
label = "volume-down";
linux,code = <114>;
- gpios = <&gpio1 3 1>;
+ gpios = <&gpio0 3 1>;
gpio-key,wakeup;
};
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index f5a6162..f67c360 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -58,7 +58,7 @@
status = "okay";
};
- i2c1: i2c at 44e0b000 {
+ i2c0: i2c at 44e0b000 {
status = "okay";
clock-frequency = <400000>;
@@ -115,26 +115,26 @@
led at 1 {
label = "evmsk:green:usr0";
- gpios = <&gpio2 4 0>;
+ gpios = <&gpio1 4 0>;
default-state = "off";
};
led at 2 {
label = "evmsk:green:usr1";
- gpios = <&gpio2 5 0>;
+ gpios = <&gpio1 5 0>;
default-state = "off";
};
led at 3 {
label = "evmsk:green:mmc0";
- gpios = <&gpio2 6 0>;
+ gpios = <&gpio1 6 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led at 4 {
label = "evmsk:green:heartbeat";
- gpios = <&gpio2 7 0>;
+ gpios = <&gpio1 7 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
@@ -148,26 +148,26 @@
switch at 1 {
label = "button0";
linux,code = <0x100>;
- gpios = <&gpio3 3 0>;
+ gpios = <&gpio2 3 0>;
};
switch at 2 {
label = "button1";
linux,code = <0x101>;
- gpios = <&gpio3 2 0>;
+ gpios = <&gpio2 2 0>;
};
switch at 3 {
label = "button2";
linux,code = <0x102>;
- gpios = <&gpio1 30 0>;
+ gpios = <&gpio0 30 0>;
gpio-key,wakeup;
};
switch at 4 {
label = "button3";
linux,code = <0x103>;
- gpios = <&gpio3 5 0>;
+ gpios = <&gpio2 5 0>;
};
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 5dfd682..2ad01c7 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -87,7 +87,7 @@
reg = <0x48200000 0x1000>;
};
- gpio1: gpio at 44e07000 {
+ gpio0: gpio at 44e07000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
gpio-controller;
@@ -98,7 +98,7 @@
interrupts = <96>;
};
- gpio2: gpio at 4804c000 {
+ gpio1: gpio at 4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
@@ -109,7 +109,7 @@
interrupts = <98>;
};
- gpio3: gpio at 481ac000 {
+ gpio2: gpio at 481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
@@ -120,7 +120,7 @@
interrupts = <32>;
};
- gpio4: gpio at 481ae000 {
+ gpio3: gpio at 481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
@@ -185,7 +185,7 @@
status = "disabled";
};
- i2c1: i2c at 44e0b000 {
+ i2c0: i2c at 44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -195,7 +195,7 @@
status = "disabled";
};
- i2c2: i2c at 4802a000 {
+ i2c1: i2c at 4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -205,7 +205,7 @@
status = "disabled";
};
- i2c3: i2c at 4819c000 {
+ i2c2: i2c at 4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list