[PATCH] ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers

[Kukjin Kim]

Sylwester Nawrocki wrote:
> 
> This patch adds default helper functions for the camera port
> pin configuration. Whenever pinctrl support for s3c24xx/s3c64xx
> SoCs is available these code should be removed and proper pinctrl
> API should be used in the CAMIF driver.
> 
> Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki at gmail.com>
> ---
>  arch/arm/mach-s3c24xx/Kconfig       |    1 +
>  arch/arm/plat-samsung/Kconfig       |    5 ++
>  arch/arm/plat-samsung/Makefile      |    1 +
>  arch/arm/plat-samsung/setup-camif.c |   70
> +++++++++++++++++++++++++++++++++++
>  4 files changed, 77 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/plat-samsung/setup-camif.c
> 
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 2b6cb5f..01f70c9 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -405,6 +405,7 @@ config MACH_MINI2440
>  	select NEW_LEDS
>  	select S3C_DEV_NAND
>  	select S3C_DEV_USB_HOST
> +	select S3C_SETUP_CAMIF
>  	help
>  	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm
> board
>  	  available via various sources. It can come with a 3.5" or 7"
> touch LCD.
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 59401e1..95360e6 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -414,6 +414,11 @@ config S5P_SETUP_MIPIPHY
>  	help
>  	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
> 
> +config S3C_SETUP_CAMIF
> +	bool
> +	help
> +	  Compile in common setup code for S3C CAMIF devices
> +
>  # DMA
> 
>  config S3C_DMA
> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-
> samsung/Makefile
> index 9e40e8d..3a7c64d 100644
> --- a/arch/arm/plat-samsung/Makefile
> +++ b/arch/arm/plat-samsung/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
> 
>  obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
> 
> +obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
>  obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
> 
>  # DMA support
> diff --git a/arch/arm/plat-samsung/setup-camif.c b/arch/arm/plat-
> samsung/setup-camif.c
> new file mode 100644
> index 0000000..e01bf76
> --- /dev/null
> +++ b/arch/arm/plat-samsung/setup-camif.c
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki at gmail.com>
> + *
> + * Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/gpio.h>
> +#include <plat/gpio-cfg.h>
> +
> +/* Number of camera port pins, without FIELD */
> +#define S3C_CAMIF_NUM_GPIOS	13
> +
> +/* Default camera port configuration helpers. */
> +
> +static void camif_get_gpios(int *gpio_start, int *gpio_reset)
> +{
> +#ifdef CONFIG_ARCH_S3C24XX
> +	*gpio_start = S3C2410_GPJ(0);
> +	*gpio_reset = S3C2410_GPJ(12);
> +#else
> +	/* s3c64xx */
> +	*gpio_start = S3C64XX_GPF(0);
> +	*gpio_reset = S3C64XX_GPF(3);
> +#endif
> +}
> +
> +int s3c_camif_gpio_get(void)
> +{
> +	int gpio_start, gpio_reset;
> +	int ret, i;
> +
> +	camif_get_gpios(&gpio_start, &gpio_reset);
> +
> +	for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
> +		int gpio = gpio_start + i;
> +
> +		if (gpio == gpio_reset)
> +			continue;
> +
> +		ret = gpio_request(gpio, "camif");
> +		if (!ret)
> +			ret = s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +		if (ret) {
> +			pr_err("failed to configure GPIO %d\n", gpio);
> +			for (--i; i >= 0; i--)
> +				gpio_free(gpio--);
> +			return ret;
> +		}
> +		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> +	}
> +
> +	return 0;
> +}
> +
> +void s3c_camif_gpio_put(void)
> +{
> +	int i, gpio_start, gpio_reset;
> +
> +	camif_get_gpios(&gpio_start, &gpio_reset);
> +
> +	for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
> +		int gpio = gpio_start + i;
> +		if (gpio != gpio_reset)
> +			gpio_free(gpio);
> +	}
> +}
> --
> 1.7.4.1

Yes, we can move on using pinctrl later when it is available. OK, applied.

Thanks.

K-Gene <kgene at kernel.org>