[PATCH 0/1 V2] ARM: kirkwood: Add support for the MPL CEC4

[Andrew Lunn]

On Sun, Nov 18, 2012 at 04:46:15PM +0100, Stefan Peter wrote:
> The MPL CEC4 is a compact industrial computer for harsh environments. You
> can find out more about it at http://www.mpl.ch/t2640.html
> 
> This patch adds basic board support using the device tree where possible.
> 
> Changes since V1
> * Replaced the 'compatible' entry "mpl,mplcec4", with "mpl,cec4-10", 
>   "mpl,cec4" in kirkwood-mplcec4.dts
> * Removed unneeded clk headers in board-mplcec4.c
> * Fixed sorting order of the kirkwood-mplcec4.dts entry in
>   arm/boot/dts/Makefile

Hi Stefan

Looks good. Thanks for making the changes.

Acked-by: Andrew Lunn <andrew at lunn.ch>

Andrew

> 
> Stefan Peter (1):
>   Add support for the MPL CEC4
> 
>  arch/arm/boot/dts/Makefile             |    1 +
>  arch/arm/boot/dts/kirkwood-mplcec4.dts |  119 ++++++++++++++++++++++++++++++++
>  arch/arm/configs/kirkwood_defconfig    |    1 +
>  arch/arm/mach-kirkwood/Kconfig         |    7 ++
>  arch/arm/mach-kirkwood/Makefile        |    1 +
>  arch/arm/mach-kirkwood/board-dt.c      |    4 ++
>  arch/arm/mach-kirkwood/board-mplcec4.c |   80 +++++++++++++++++++++
>  arch/arm/mach-kirkwood/common.h        |    6 ++
>  8 files changed, 219 insertions(+)
>  create mode 100644 arch/arm/boot/dts/kirkwood-mplcec4.dts
>  create mode 100644 arch/arm/mach-kirkwood/board-mplcec4.c
> 
> -- 
> 1.7.9.5
>