June 2012 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Jun 1 00:36:28 EDT 2012
Ending: Sat Jun 30 19:44:14 EDT 2012
Messages: 4533

• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH 5/9] blackfin: A couple of task->mm handling fixes   Mike Frysinger
• [PATCH 2/2] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCHv2 0/3] omap3 and omap4: add device tree support for wdt   jgq516 at gmail.com
• [PATCHv2 1/3] arm/dts: add wdt node for omap3 and omap4   jgq516 at gmail.com
• [PATCHv3 2/3] OMAP: avoid build wdt platform device if with dt support   jgq516 at gmail.com
• [PATCHv2 3/3] watchdog: omap_wdt: add device tree support   jgq516 at gmail.com
• Query about: ARM11 MPCore: preemption/task migration cache coherency   snakky.zhang at gmail.com
• [PATCH] ARM: mxs: Enable MACH_APX4DEVKIT   Lauri Hintsala
• [ehci-mxc] USB stopped working in i.MX27 based Visstrim_M10 board.   javier Martin
• [PATCH] ARM: OMAP2+: OPP: Fix to ensure check of right oppdef after bad one   Igor Grinberg
• [PATCH] ARM: OMAP2+: OPP: Fix to ensure check of right oppdef after bad one   Menon, Nishanth
• [PATCH v2] omap: dma: Clear status registers on enable/disable irq.   Jarkko Nikula
• [PATCH v2] Visstrim M10: fix gpio handling.   Javier Martin
• [PATCH v2] ARM: at91: aic can use fast eoi handler type   ludovic.desroches
• [PATCHv3 8/9] ARM: OMAP3: prevent per_clkdm from attempting manual domain transitions   Tero Kristo
• [PATCH v2][for_v3.5] media: mx2_camera: Fix mbus format handling   Javier Martin
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH v2][for_v3.5] media: mx2_camera: Fix mbus format handling   javier Martin
• [PATCH 0/9] Add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 1/9] ARM: tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 2/9] i2c: tegra: Add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 3/9] mmc: tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 4/9] USB: ehci-tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 5/9] Input: tegra-kbc - add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 6/9] spi/tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 7/9] staging: nvec: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 8/9] ASoC: tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 9/9] crypto: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH 26/27] arm, smpboot: Use generic SMP booting infrastructure   Srivatsa S. Bhat
• [PATCH 1/2 v4] ARM: OMAP2+: omap_hwmod: Add api to enable/disable module level wakeup events   Menon, Nishanth
• [PATCH v3][for_v3.5] media: mx2_camera: Fix mbus format handling   Javier Martin
• [PATCHv5 1/2] drivers: input: keypad: Add device tree support   Poddar, Sourav
• [GIT PULL] ARM: ux500: fixes for mismerge   Arnd Bergmann
• pinctrl: group/pin identity mapping   Grégor Boirie
• [PATCH v3] ARM: at91: aic can use fast eoi handler type   ludovic.desroches at atmel.com
• [PATCH v10 0/3] MTD: at91: Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH v10 1/3] MTD: at91: extract hw ecc initialization to one function   Josh Wu
• [PATCH v10 2/3] MTD: at91: add dt parameters for PMECC   Josh Wu
• [PATCH v10 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCHv3 2/9] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Menon, Nishanth
• [PATCHv6 13/14] ARM: OMAP3: vc: auto_ret / auto_off support   Menon, Nishanth
• [PATCHv3 2/9] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Paul Walmsley
• [RFC 03/34] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   Russell King - ARM Linux
• pinctrl: group/pin identity mapping   Ben Dooks
• [RFC 04/34] dmaengine: PL08x: remove runtime PM support   Russell King - ARM Linux
• [RFC 05/34] dmaengine: PL08x: fix missed dma_transfer_direction fixup   Russell King - ARM Linux
• [RFC 08/34] dmaengine: PL08x: clean up get_signal/put_signal   Russell King - ARM Linux
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Jason Cooper
• [RFC 23/34] dmaengine: PL08x: re-jig the starting of txds   Russell King - ARM Linux
• [RFC 34/34] dmaengine: PL08x: ensure all descriptors are freed when channel is released   Russell King - ARM Linux
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   Tony Lindgren
• [PATCH 26/27] arm, smpboot: Use generic SMP booting infrastructure   Russell King - ARM Linux
• [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area   Tony Lindgren
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Tony Lindgren
• [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type   Tony Lindgren
• [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Tony Lindgren
• [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Tony Lindgren
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Rajendra Nayak
• [RFC 01/24] clk: Add CLK_IS_BASIC flag to identify basic clocks   Rajendra Nayak
• [RFC 02/24] ARM: omap4: cm: add bitfield width values   Rajendra Nayak
• [RFC 03/24] ARM: omap: clk: convert all clk_enable to clk_prepare_enable   Rajendra Nayak
• [RFC 04/24] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• [RFC 05/24] ARM: omap: clk: Nuke plat clock.c & clock.h if CONFIG_COMMON_CLK   Rajendra Nayak
• [RFC 06/24] ARM: omap: clk: Remove all direct dereferncing of struct clk   Rajendra Nayak
• [RFC 07/24] ARM: omap: hwmod: Fix up hwmod based clkdm accesses   Rajendra Nayak
• [RFC 08/24] ARM: omap4: clk: Convert to common clk   Rajendra Nayak
• [RFC 09/24] ARM: omap3: clk: Convert to common clk   Rajendra Nayak
• [RFC 10/24] ARM: omap2: clk: Convert to common clk   Rajendra Nayak
• [RFC 11/24] ARM: omap: clk: list all clk_hw_omap clks to enable/disable autoidle   Rajendra Nayak
• [RFC 12/24] ARM: omap: clk: Define a function to enable clocks at init   Rajendra Nayak
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Rajendra Nayak
• [RFC 14/24] ARM: omap3: clk: Add 3xxx data using common struct clk   Rajendra Nayak
• [RFC 15/24] ARM: omap2: clk: Add 24xx data using common struct clk   Rajendra Nayak
• [RFC 16/24] ARM: omap: clk: Switch to COMMON clk   Rajendra Nayak
• [RFC 17/24] ARM: omap: clk: Use plat clock.c & clock.h only for OMAP1   Rajendra Nayak
• [RFC 18/24] ARM: omap: hwmod: Cleanup !CONFIG_COMMON_CLK parts   Rajendra Nayak
• [RFC 19/24] ARM: omap4: clk: Cleanup !CONFIG_COMMON_CLK parts   Rajendra Nayak
• [RFC 20/24] ARM: omap3: clk: Cleanup !CONFIG_COMMON_CLK parts   Rajendra Nayak
• [RFC 21/24] ARM: omap2: clk: Cleanup !CONFIG_COMMON_CLK parts   Rajendra Nayak
• [RFC 22/24] ARM: omap4: clk: Delete old OMAP clock data   Rajendra Nayak
• [RFC 23/24] ARM: omap3: clk: Delete old OMAP clock data   Rajendra Nayak
• [RFC 24/24] ARM: omap2: clk: Delete old OMAP clock data   Rajendra Nayak
• [PATCH 1/9] ARM: tegra: add clk_prepare/clk_unprepare   Sergei Shtylyov
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Shilimkar, Santosh
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Mark Brown
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Cousson, Benoit
• [RFC PATCH 2/5] arm: omap: remove ocp2scp_usb_phy_ick clock node   ABRAHAM, KISHON VIJAY
• [linux-pm] [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Tony Lindgren
• [GIT PULL] DT clk binding support   Rob Herring
• [RFC PATCH 2/5] arm: omap: remove ocp2scp_usb_phy_ick clock node   Cousson, Benoit
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Konstantin Baydarov
• [PATCHv2 0/3] omap3 and omap4: add device tree support for wdt   Jon Hunter
• [PATCH] ARM: OMAP2+: OPP: Fix to ensure check of right oppdef after bad one   Kevin Hilman
• [linux-pm] [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Kevin Hilman
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Tony Lindgren
• [linux-pm] [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Tony Lindgren
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Konstantin Baydarov
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH 0/9] Add clk_prepare/clk_unprepare   Mark Brown
• pinctrl: group/pin identity mapping   Stephen Warren
• [GIT PULL] CMA and ARM DMA-mapping updates for v3.5   Russell King - ARM Linux
• [RFC PATCH 2/5] arm: omap: remove ocp2scp_usb_phy_ick clock node   ABRAHAM, KISHON VIJAY
• [PATCH] ARM: two possible fixes for the KALLSYMS build problem   David Brown
• [PATCH variant 1] ARM: Prevent KALLSYM size mismatch on ARM.   David Brown
• [PATCH variant 2] ARM: Prevent KALLSYM size mismatch on ARM.   David Brown
• [RFC PATCH 05/11] mfd: omap: control: core system control driver   Eduardo Valentin
• [PATCH 7/9] staging: nvec: add clk_prepare/clk_unprepare   Marc Dietrich
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Mike Turquette
• [PATCH 1/1] TPM: STMicroelectronics ST33 I2C/SPI & ST19 I2C   Mathias Leblanc
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Thavatchai Makphaibulcboke
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH] lib/decompress_unxz.c: removing all memory helper functions   Thavatchai Makphaibulcboke
• [PATCH v5 1/7] ARM: davinci, cp_intc: Add irq domain support   Sekhar Nori
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Jon Hunter
• [PATCH V2 4/4] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Kevin Hilman
• [PATCH V2 2/4] ARM: OMAP3+: PM: VP: move check of idle to separate function   Kevin Hilman
• [PATCH V2 3/4] ARM: OMAP3+: PM: VP: check to ensure VP is idle before forceupdate   Kevin Hilman
• [PATCH V2 4/4] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Menon, Nishanth
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Jon Hunter
• [linux-pm] [PATCH 0/2] bug fixes for coupled cpuidle   Len Brown
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Wolfram Sang
• Kernel 3.4 on Dreamplug: no serial console   Hans Kröner
• ARM PCI controller registration and representation using device tree?   Florian Fainelli
• ARM PCI controller registration and representation using device tree?   Russell King - ARM Linux
• Kernel 3.4 on Dreamplug: no serial console   Adam Baker
• [PATCH v3] ARM: at91: aic can use fast eoi handler type   Will Deacon
• Kernel 3.4 on Dreamplug: no serial console   Andrew Lunn
• ARM PCI controller registration and representation using device tree?   Rob Herring
• ARM PCI controller registration and representation using device tree?   Arnd Bergmann
• ARM PCI controller registration and representation using device tree?   Arnd Bergmann
• ARM PCI controller registration and representation using device tree?   Russell King - ARM Linux
• [PATCH v2 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Russell King - ARM Linux
• ARM PCI controller registration and representation using device tree?   Arnd Bergmann
• [PATCH v3 0/6] spi: s3c64xx: add support for device tree   Thomas Abraham
• [PATCH v3 1/6] spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macro   Thomas Abraham
• [PATCH v3 2/6] spi: s3c64xx: move controller information into driver data   Thomas Abraham
• [PATCH v3 3/6] ARM: Samsung: Remove pdev pointer paremeter from spi gpio setup functions   Thomas Abraham
• [PATCH v3 4/6] ARM: Samsung: Modify s3c64xx_spi{0|1|2}_set_platdata function   Thomas Abraham
• [PATCH v3 5/6] spi: s3c64xx: Remove the 'set_level' callback from controller data   Thomas Abraham
• [PATCH v3 6/6] spi: s3c64xx: add device tree support   Thomas Abraham
• [PATCH 1/2] ARM: S3C64XX: Dynamically allocate the IRQ range for WM8994 on Cragganmore   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Dynamically assign interrupts for CPU PMIC on Cragganmore   Mark Brown
• [PATCH v2 0/6] ARM: Exynos: Enable SPI platform support for Exynos4 and Exynos5   Thomas Abraham
• [PATCH v2 1/6] ARM: Exynos4: Fix the incorrect hierarchy of spi controller bus clock   Thomas Abraham
• [PATCH v2 2/6] ARM: Exynos5: Add spi clock support   Thomas Abraham
• [PATCH v2 3/6] ARM: Exynos4: Enable platform support for SPI controllers   Thomas Abraham
• [PATCH v2 4/6] ARM: Exynos5: Enable platform support for SPI controllers   Thomas Abraham
• [PATCH v2 5/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos4 platforms   Thomas Abraham
• [PATCH v2 6/6] ARM: dts: Add nodes for spi controllers for Samsung Exynos5 platforms   Thomas Abraham
• Kernel 3.4 on Dreamplug: no serial console   Hans Kröner
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Joe Perches
• Kernel 3.4 on Dreamplug: no serial console   Adam Baker
• Kernel 3.4 on Dreamplug: no serial console   Arnd Bergmann
• [PATCH] ohci-nxp: Use ohci_finish_controller_resume()   Roland Stigge
• [PATCH v4 1/2] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH v4 2/2] ARM: LPC32xx: Make platform use key driver   Roland Stigge
• [PATCH v4] MTD: LPC32xx SLC NAND driver   Roland Stigge
• Kernel 3.4 on Dreamplug: no serial console   Jason Cooper
• [PATCH v3] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH v4] MTD: LPC32xx SLC NAND driver   Russell King - ARM Linux
• Kernel 3.4 on Dreamplug: no serial console   Andrew Lunn
• PLEASE, REMOVE MY EMAIL ADDRESS FROM ITS LIST.   Russell King - ARM Linux
• [PATCH v4] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH] spi-orion: remove uneeded spi_info   Michael Walle
• [PATCH 1/3] spi-orion: add device tree binding   Michael Walle
• [PATCH 2/3] ARM: kirkwood: use devicetree for orion-spi   Michael Walle
• [PATCH 3/3] ARM: kirkwood: use devicetree for SPI on dreamplug   Michael Walle
• [PATCH v4] MTD: LPC32xx SLC NAND driver   Russell King - ARM Linux
• [PATCH] spi-orion: remove uneeded spi_info   Jason Cooper
• [PATCH 1/3] spi-orion: add device tree binding   Jason Cooper
• [PATCH] spi-orion: remove uneeded spi_info   Jason Cooper
• [PATCH 1/3] spi-orion: add device tree binding   Michael Walle
• [PATCH] spi-orion: remove uneeded spi_info   Michael Walle
• PLEASE, REMOVE MY EMAIL ADDRESS FROM ITS LIST.   William F.
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [RESEND PATCH] dma: imx-sdma: buf_tail should be initialize in prepare function   Richard Zhao
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Richard Zhao
• [PATCH v2 REBASE] ASoC: imx-audmux: add pinctrl support   Richard Zhao
• [PATCH RESEND] mfd: anatop: permit adata be NULL when access register   Richard Zhao
• [PATCH RESEND] mfd: anatop: permit adata be NULL when access register   Richard Zhao
• [PATCH v2] i2c: imx: convert to use managed functions   Richard Zhao
• [PATCH] ARM: S3C64XX: Add a new dma request id for device tree based dma channel lookup   Thomas Abraham
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Rob Landley
• [PATCH] ARM: exynos: enable more platforms in defconfig   Olof Johansson
• Freescale fec.c driver breakage   Greg Ungerer
• [PATCH] ARM: exynos: add UART3 to DEBUG_LL ports   Olof Johansson
• [PATCH v2] i2c: imx: convert to use managed functions   Shubhrajyoti Datta
• [PATCH v3 2/3] ep93xx: IDE driver platform support code   Ryan Mallon
• [PATCH v3 3/3] ep93xx: Add IDE support to edb93xx boards   Ryan Mallon
• [RFC 11/24] ARM: omap: clk: list all clk_hw_omap clks to enable/disable autoidle   Tony Lindgren
• Request for inclusion of ep93xx tree in linux-next   Ryan Mallon
• [PATCH v2] omap: dma: Clear status registers on enable/disable irq.   Tony Lindgren
• [GIT PULL] CMA and ARM DMA-mapping fix for v3.5-rc2   Marek Szyprowski
• [PATCH v1 0/5] mmp audio support   Zhangfei Gao
• [PATCH v1 1/5] dmaengine: mmp_tdma: add mmp tdma support   Zhangfei Gao
• [PATCH v1 2/5] ASoC: mmp: add audio dma support   Zhangfei Gao
• [PATCH v1 3/5] ASOC: mmp: add sspa support   Zhangfei Gao
• [PATCH v1 4/5] ASoC: add mmp brownstone support   Zhangfei Gao
• [PATCH v1 5/5] ASoC: add ttc-dkb machine support   Zhangfei Gao
• Request for inclusion of ep93xx tree in linux-next   Stephen Rothwell
• [PATCH v3] ARM: at91: aic can use fast eoi handler type   ludovic.desroches
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation   Bryan Wu
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Mark Brown
• [PATCH] ARM: OMAP4: hwspinlocks_init() should be static   Tony Lindgren
• [PATCH 05/20] ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition   Thomas Abraham
• pinctrl: group/pin identity mapping   Grégor Boirie
• Freescale fec.c driver breakage   Sascha Hauer
• Kernel 3.4 on Dreamplug: no serial console   Florian Fainelli
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Rajendra Nayak
• [RFC 1/6] From: Domenico Andreoli <domenico.andreoli at linux.com> ARM: Inject the Earlycon drivers into the decompressor   Russell King - ARM Linux
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Rajendra Nayak
• [RFC 11/24] ARM: omap: clk: list all clk_hw_omap clks to enable/disable autoidle   Rajendra Nayak
• Primera página de bonos solidarios   GlobalBono
• Freescale fec.c driver breakage   Mark Brown
• Query about: ARM11 MPCore: preemption/task migration cache coherency   snakky.zhang at gmail.com
• [PATCHv3 2/9] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Tero Kristo
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Mark Brown
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Sagar Dharia
• [PATCH v2 REBASE] ASoC: imx-audmux: add pinctrl support   Mark Brown
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Sagar Dharia
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Russell King - ARM Linux
• [PATCH 1/1] ARM: dma-mapping: Add missing static storage class specifier   Sachin Kamat
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Sagar Dharia
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Sagar Dharia
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Mark Brown
• [GIT PULL] OMAP PM fixes for v3.5-rc   Tony Lindgren
• [GIT PULL] OMAP: AM3xxx: cpu_is dead code removal   Tony Lindgren
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Sagar Dharia
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Mark Brown
• [PATCH v2] i2c: imx: convert to use managed functions   Richard Zhao
• [PATCH v3] i2c: imx: convert to use managed functions   Richard Zhao
• [PATCH v2] usb: fsl_udc: errata - postpone freeing current dTD   Christoph Fritz
• [PATCH v2] usb: fsl_udc: errata - postpone freeing current dTD   Christoph Fritz
• v3.5-rc1 ARM PXA possible regression   Paul Parsons
• [PATCH 1/3] ARM i.MX pllv2: use standard register set unconditionally   Sascha Hauer
• [PATCH 2/3] ARM i.MX pllv2: make round_rate accurate   Sascha Hauer
• [PATCH 3/3] ARM i.MX53: Fix PLL4 base address   Sascha Hauer
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Jon Hunter
• [RFC 05/24] ARM: omap: clk: Nuke plat clock.c & clock.h if CONFIG_COMMON_CLK   Jon Hunter
• [RFC 00/24] Move OMAP2+ over to use COMMON clock   Rajendra Nayak
• v3.5-rc1 ARM PXA possible regression   Andrew Lunn
• v3.5-rc1 ARM PXA possible regression   Arnaud Patard (Rtp)
• [RFC 05/24] ARM: omap: clk: Nuke plat clock.c & clock.h if CONFIG_COMMON_CLK   Rajendra Nayak
• [RFC 05/24] ARM: omap: clk: Nuke plat clock.c & clock.h if CONFIG_COMMON_CLK   Jon Hunter
• [PATCH] ohci-nxp: Use ohci_finish_controller_resume()   Alan Stern
• Kernel 3.4 on Dreamplug: no serial console   Arnd Bergmann
• [PATCH] clk: wm831x: Add initial WM831x clock driver   Mark Brown
• [PATCH] ohci-nxp: Use ohci_finish_controller_resume()   ABRAHAM, KISHON VIJAY
• [PATCH v2] usb: fsl_udc: errata - postpone freeing current dTD   Felipe Balbi
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Felipe Balbi
• [PATCH] ohci-nxp: Use ohci_finish_controller_resume()   Roland Stigge
• v3.5-rc1 ARM PXA possible regression   Paul Parsons
• [PATCH] usb: gadget: regression fix - useage of usb_ep   Christoph Fritz
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Nicolas Ferre
• [RFC 23/34] dmaengine: PL08x: re-jig the starting of txds   Linus Walleij
• [PATCH V2 4/4] ARM: OMAP3+: PM: VP: ensure VP is idle before disable   Kevin Hilman
• ARM: iMX: lockup with irqs disabled in drivers/tty/imx.c   manfred.schlaegl at gmx.at
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Marc Butler
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Marek Vasut
• [PATCH] dt: name all Tegra binding docs consistently   Stephen Warren
• [PATCH 1/3] ARM: tegra: make .dts compilation depend on Tegra2 support   Stephen Warren
• [PATCH V2 1/3] ARM: tegra: trimslice: enable PCIe when booting from device tree   Stephen Warren
• [PATCH] ARM: dt: tegra: add Whistler device tree file   Stephen Warren
• [PATCH V2 1/2] ARM: tegra: config: enable TPS65910 drivers   Stephen Warren
• [PATCH REPOST 1/2] mmc: tegra: use bus-width property instead of support-8bit   Stephen Warren
• [PATCH REPOST 2/2] ARM: dt: tegra: remove legacy support-8bit property   Stephen Warren
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Alexander Shishkin
• [PATCH RESEND 1/2] serial/8250: Add LPC3220 standard UART type   Roland Stigge
• [PATCH RESEND 2/2] serial/of-serial: Add LPC3220 standard UART compatible string   Roland Stigge
• [PATCH] ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused   Roland Stigge
• [PATCH v5] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH v4] MTD: LPC32xx MLC NAND driver   Roland Stigge
• v3.5-rc1 ARM PXA possible regression   Simon Baatz
• [PATCH] ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused   Alan Stern
• [PATCH 1/2] remoteproc: maintain a generic child device for each rproc   Stephen Boyd
• [PATCH 2/2] remoteproc: remove the now-redundant kref   Stephen Boyd
• [PATCH] remoteproc: block premature rproc booting   Stephen Boyd
• [PATCH v2] omap: dma: Clear status registers on enable/disable irq.   Janusz Krzysztofik
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Jon Hunter
• strongly ordered comment on device memory in mmu.c   John Linn
• [RFC 1/6] From: Domenico Andreoli <domenico.andreoli at linux.com> ARM: Inject the Earlycon drivers into the decompressor   Domenico Andreoli
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Ryan Mallon
• strongly ordered comment on device memory in mmu.c   Russell King - ARM Linux
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Chris Ball
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Haojian Zhuang
• v3.5-rc1 ARM PXA possible regression   Eric Miao
• [PATCH] ARM: highbank: Add smc calls to enable/disable the L2   Rob Herring
• Query about: ARM11 MPCore: preemption/task migration cache coherency   George G. Davis
• [PATCH] ARM: tegra: Remove flow controller programming   Prashant Gaikwad
• [PATCH v3 0/9] Add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 1/9] ARM: tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 2/9] i2c: tegra: Add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 3/9] mmc: tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 4/9] USB: ehci-tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 5/9] Input: tegra-kbc - add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 6/9] spi/tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 7/9] staging: nvec: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 8/9] ASoC: tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [PATCH v3 9/9] crypto: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Rajendra Nayak
• Query about: ARM11 MPCore: preemption/task migration cache coherency   bill4carson
• [RFC 05/24] ARM: omap: clk: Nuke plat clock.c & clock.h if CONFIG_COMMON_CLK   Rajendra Nayak
• [PATCH v2] omap: dma: Clear status registers on enable/disable irq.   Tony Lindgren
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Tony Lindgren
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Tony Lindgren
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Sascha Hauer
• [PATCH] printk: Fix alignment of buf causing crash on ARM EABI   Andrew Lunn
• Freescale fec.c driver breakage   Greg Ungerer
• [PATCH] printk: Fix alignment of buf causing crash on ARM EABI   Greg KH
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Minchan Kim
• [PATCH] [RESEND] ARM: use common utility function in dma   Minchan Kim
• [PATCH 0/2] A couple of imx6q clock patches   Shawn Guo
• [PATCH 1/2] ARM: imx6q: remove unneeded clkdev lookups   Shawn Guo
• [PATCH 2/2] ARM: imx6q: fix suspend regression caused by common clk migration   Shawn Guo
• [PATCH 1/3] ARM: SAMSUNG: Add config() function in DMA common operations   Boojin Kim
• [PATCH 2/3] spi: Add the use of DMA config operation   Boojin Kim
• [PATCH 3/3] ASoC: follow the updated samsung DMA common operations   Boojin Kim
• [PATCH] RFC: ARM: Ensure backtraces console printing in sleep mode   Linus Walleij
• [PATCH v2] Visstrim M10: fix gpio handling.   Sascha Hauer
• multiple target patterns issue while making kernel   Haojian Zhuang
• [RESUBMIT PATCH] ARM: OMAP2+: am33xx: Add low level debugging support   Tony Lindgren
• [PATCH] ARM: OMAP2+: am33xx: Add AM335XEVM machine support   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: Add AM335x and AM3517/05 EVM DT support   Tony Lindgren
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Tony Lindgren
• [PATCH] ARM: OMAP2+: am33xx: Add AM335XEVM machine support   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: am33xx: Add AM335XEVM machine support   Tony Lindgren
• multiple target patterns issue while making kernel   Haojian Zhuang
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Hiremath, Vaibhav
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Tony Lindgren
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Hiremath, Vaibhav
• i.MX IPU preparation patches   Sascha Hauer
• [PATCH 1/2] ARM i.MX51: setup mipi   Sascha Hauer
• [PATCH 2/2] ARM i.MX5: Hard reset the IPU during startup   Sascha Hauer
• [PATCH] RFC: ARM: Ensure backtraces console printing in sleep mode   Russell King - ARM Linux
• Freescale fec.c driver breakage   Mark Brown
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 3/8] arch: Remove direct definitions of KERN_<LEVEL> uses   Joe Perches
• [PATCH] ARM: highbank: Add smc calls to enable/disable the L2   Russell King - ARM Linux
• [PATCH 1/2] ARM: dts: update memory size on brownstone   Haojian Zhuang
• [PATCH 2/2] ARM: mmp: fix missing cascade_irq in irq handler   Haojian Zhuang
• [GIT PULL] [for 3.5] pull request of fixes branch on arch-pxa tree   Haojian Zhuang
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Mark Brown
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Russell King - ARM Linux
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Mark Brown
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Mark Brown
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Russell King - ARM Linux
• [PATCH v2] ARM: mach-shmobile: set i2c_board_info.type once   Paul Bolle
• [PATCH v2 REBASE] ASoC: fsl_ssi: convert to use devm_clk_get   Mark Brown
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCH 2/2] remoteproc: remove the now-redundant kref   Ohad Ben-Cohen
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Mark Brown
• [PATCH 2/2] ARM i.MX5: Hard reset the IPU during startup   Lothar Waßmann
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Mark Brown
• [PATCH] clkdev: Fix leak in devm_clk_put()   Mark Brown
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Russell King - ARM Linux
• [PATCH] remoteproc: block premature rproc booting   Ohad Ben-Cohen
• [PATCH v3] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Tony Lindgren
• [PATCH 2/2] ARM i.MX5: Hard reset the IPU during startup   Sascha Hauer
• [PATCH v3] OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup   Tony Lindgren
• Freescale fec.c driver breakage   Greg Ungerer
• Freescale fec.c driver breakage   Mark Brown
• [PATCH] clk: Move devm_ APIs out of clkdev into HAVE_CLK   Mark Brown
• Freescale fec.c driver breakage   Greg Ungerer
• Freescale fec.c driver breakage   Mark Brown
• [PATCH 3/3] gpio: exynos4: skip gpiolib registration if pinctrl driver is used   Linus Walleij
• Freescale fec.c driver breakage   Sascha Hauer
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Linus Walleij
• [PATCH v10 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [RFC 05/24] ARM: omap: clk: Nuke plat clock.c & clock.h if CONFIG_COMMON_CLK   Jon Hunter
• Freescale fec.c driver breakage   Greg Ungerer
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Rajendra Nayak
• Freescale fec.c driver breakage   Mark Brown
• Freescale fec.c driver breakage   Sascha Hauer
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Alexander Shishkin
• [PATCH] printk: Fix alignment of buf causing crash on ARM EABI   Kay Sievers
• [PATCH v3 05/12] usb: chipidea: add imx platform driver   Alexander Shishkin
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Alan Stern
• Freescale fec.c driver breakage   Steven King
• [PATCH 0/4] ARM: at91: introduce AIC5 support   ludovic.desroches at atmel.com
• [PATCH 1/4] ARM: at91: at91 based machines specify their own irq handler at run time   ludovic.desroches at atmel.com
• [PATCH 2/4] ARM: at91: fix irq_alloc_descs parameters for sparse irq   ludovic.desroches at atmel.com
• [PATCH 3/4] ARM: at91: enable use of sparse irq   ludovic.desroches at atmel.com
• [PATCH 4/4] ARM: at91: add AIC5 support   ludovic.desroches at atmel.com
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Felipe Balbi
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Marek Vasut
• [PATCH] printk: Fix alignment of buf causing crash on ARM EABI   Stephen Warren
• Supporting non-device tree consumers with device tree regulator drivers   David Collins
• Supporting non-device tree consumers with device tree regulator drivers   Mark Brown
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Alan Stern
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Marek Vasut
• [PATCH 2/2] ARM: mmp: fix missing cascade_irq in irq handler   Chris Ball
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Alan Stern
• [linux-pm] [PATCH 0/2] bug fixes for coupled cpuidle   Kevin Hilman
• [PATCH v2] omap: dma: Clear status registers on enable/disable irq.   Matcovschi, Oleg
• [PATCH][RFC] mm: Don't put CMA pages on per-cpu lists   Laura Abbott
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Marc Butler
• [PATCH 0/8] Rework KERN_<LEVEL>   Andrew Morton
• [PATCH 0/8] Rework KERN_<LEVEL>   Kay Sievers
• Another CMA build warning   Russell King - ARM Linux
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Andrew Morton
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Kay Sievers
• [PATCH] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCH 0/8] Rework KERN_<LEVEL>   Andrew Morton
• [PATCH 0/8] Rework KERN_<LEVEL>   Andrew Morton
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Kay Sievers
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Kay Sievers
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Andrew Morton
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Kay Sievers
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCH 0/8] Rework KERN_<LEVEL>   Kay Sievers
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Andrew Morton
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH 0/8] Rework KERN_<LEVEL>   Andrew Morton
• [PATCH 0/8] Rework KERN_<LEVEL>   Kay Sievers
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Richard Zhao
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Arnd Bergmann
• [PATCH v4] usb: ehci-hcd: notify phy when connect change   Richard Zhao
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Mitch Bradley
• [PATCH 0/8] Rework KERN_<LEVEL>   Joe Perches
• [PATCH] ARM: imx6: exit coherency when shutting down a cpu   Shawn Guo
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Shawn Guo
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Haojian Zhuang
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Shawn Guo
• [PATCH 9/8] printk: Only look for prefix levels in kernel messages   Joe Perches
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Arnd Bergmann
• [PATCH] remoteproc: block premature rproc booting   Stephen Boyd
• [PATCH v10 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Wu, Josh
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c   Shawn Guo
• Supporting non-device tree consumers with device tree regulator drivers   Rajendra Nayak
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Mitch Bradley
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Haojian Zhuang
• [PATCH] MXS: Add DT binding support into stmp3xxx-rtc   Shawn Guo
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Shawn Guo
• [PATCH] remoteproc: block premature rproc booting   Ohad Ben-Cohen
• [PATCH] MXS: Add DENX M28 dts file   Shawn Guo
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Felipe Balbi
• Query about: ARM11 MPCore: preemption/task migration cache coherency   Andrew Yan-Pai Chen
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Shawn Guo
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Richard Zhao
• [PATCH] ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi   Stefan Roese
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Stefan Roese
• [PATCH 1/2] ARM: mx28: add gpmi-nand support   Shawn Guo
• [PATCH 2/2] clk: mxs: rename the gpmi clock for imx28   Shawn Guo
• [PATCH] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Cousson, Benoit
• Freescale fec.c driver breakage   Greg Ungerer
• [PATCH] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Cousson, Benoit
• [PATCH] MXS: Add DT binding support into stmp3xxx-rtc   Lothar Waßmann
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Sagar Dharia
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCH] MXS: Add DENX M28 dts file   Shawn Guo
• [PATCH] slimbus: Linux driver framework for SLIMbus.   Sagar Dharia
• [PATCH 0/3] Few omap randconfig fixes for v3.5-rc1   Tony Lindgren
• [PATCH 1/3] ARM: OMAP: Fix MMC_OMAP build when only MMC_OMAP_HS is selected   Tony Lindgren
• [PATCH 2/3] ARM: OMAP3: Fix omap3_l3_block_irq warning when CONFIG_BUG is not set   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: Fix compile for CONFIG_TIDSPBRIDGE platform init code   Tony Lindgren
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change   Alexander Shishkin
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Alexander Shishkin
• [PATCH v5] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [PATCH v5] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [PATCH v3 01/12] usb: otg: add notify_connect/notify_disconnect callback   Felipe Balbi
• [PATCH v3 02/12] usb: chipidea: permit driver bindings pass phy pointer   Felipe Balbi
• [PATCH v3 04/12] usb: otg: add basic mxs phy driver support   Felipe Balbi
• [PATCH v5] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH] arm/dts: OMAP4: Add Variscite OMAP4 System-On-Modeule support   Tony Lindgren
• [PATCH 0/2] some minor clk fixes   Rajendra Nayak
• [PATCH 1/2] clk: cache parent clocks only for muxes   Rajendra Nayak
• [PATCH 2/2] clk: Allow late cache allocation for clk->parents   Rajendra Nayak
• [PATCH v6] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH v5] MTD: LPC32xx MLC NAND driver   Roland Stigge
• MMC issues with 2.6.28 - any known issues?   Wolfgang Wegner
• [PATCH] ARM: mm: fix type of the arm_dma_limit global variable   Marek Szyprowski
• [PATCH] ARM: mm: fix type of the arm_dma_limit global variable   Russell King - ARM Linux
• [PATCH v4] usb: ehci-hcd: notify phy when connect change   Alexander Shishkin
• [PATCH 1/4] ARM: at91: at91 based machines specify their own irq handler at run time   Christian Glindkamp
• [PATCH] gpio/mxc: make irqs work for fsl,imx21-gpio devices   Uwe Kleine-König
• [PATCH] mmc: atmel-mci: fix data timeout issue   Chris Ball
• [PATCH] mmc: atmel-mci: fix burst/chunk size modification   Chris Ball
• [PATCH 1/2] Allow constructor name selection by architecture.   Russell King - ARM Linux
• [PATCH 0/2] A couple of imx6q clock patches   Sascha Hauer
• [PATCH] mmc: atmel-mci: fix burst/chunk size modification   ludovic.desroches at atmel.com
• No subject   Sascha Hauer
• [PATCH 1/4] mtd nand mxc_nand: Use managed resources   Sascha Hauer
• [PATCH 2/4] mtd nand mxc_nand: swap iomem resource order   Sascha Hauer
• [PATCH 3/4] mtd nand mxc_nand: add i.MX53 support   Sascha Hauer
• [PATCH 4/4] ARM i.MX5: Add nand oftree support   Sascha Hauer
• [PATCHv2] ARM: mm: fix type of the arm_dma_limit global variable   Marek Szyprowski
• [PATCH] i.MX5 nand support   Sascha Hauer
• [PATCH 1/2] clk: cache parent clocks only for muxes   Russell King - ARM Linux
• [PATCH v10 3/3] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Artem Bityutskiy
• [PATCH v4] usb: ehci-hcd: notify phy when connect change   Richard Zhao
• [PATCH] arm:gemini: fix irq.c   Andreas Bießmann
• [PATCH v4] usb: ehci-hcd: notify phy when connect change   Alexander Shishkin
• [PATCH 0/2] A couple of imx6q clock patches   Shawn Guo
• [PATCH 1/1] mx3fb: support pan display with fb_set_var   Liu Ying
• [RFC PATCH] clk: add extension API   Peter De Schrijver
• [PATCH] arm/dts: OMAP4: Add Variscite OMAP4 System-On-Modeule support   Uri Yosef
• [PATCH 0/2] A couple of imx6q clock patches   Sascha Hauer
• [PATCH 0/2] A couple of imx6q clock patches   Shawn Guo
• [PATCH] mmc: atmel-mci: fix burst/chunk size modification   Chris Ball
• [PATCH/RFC 0/2] ARM: DMA-mapping: new extensions for buffer sharing (part 2)   Marek Szyprowski
• [PATCH 1/2] common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute   Marek Szyprowski
• [PATCH 2/2] ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute   Marek Szyprowski
• [PATCH v3 00/12] add imx usb driver for mx28/6x   Alexander Shishkin
• [PATCH v6] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [PATCH v6] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [PATCH] mmc: omap: Fix a section warning regression   Chris Ball
• [PATCH/RFC 0/2] ARM: DMA-mapping: new extensions for buffer sharing (part 2)   Subash Patel
• [PATCH] mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() fails   Chris Ball
• [PATCH] mmc: omap: Fix broken reg_shift initialization   Chris Ball
• [PATCH REPOST 1/2] mmc: tegra: use bus-width property instead of support-8bit   Chris Ball
• [PATCH] mmc: mxs-mmc: Move of_match_table out of CONFIG_PM   Chris Ball
• [PATCH v4] usb: ehci-hcd: notify phy when connect change   Alan Stern
• [PATCH v6] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH v6] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
•   Artem Bityutskiy
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   ABRAHAM, KISHON VIJAY
• [PATCH] mmc: mxs-mmc: Move of_match_table out of CONFIG_PM   Marek Vasut
• [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp   Mitch Bradley
• [PATCH] ARM: tegra: Remove flow controller programming   Stephen Warren
• [PATCH REPOST 1/2] mmc: tegra: use bus-width property instead of support-8bit   Stephen Warren
• [PATCH] ARM: mx35: add WEIM register addresses   Christoph Fritz
• [PATCH REPOST] arm: Don't try to print pud/pmd information unless present   Laura Abbott
• Supporting non-device tree consumers with device tree regulator drivers   David Brown
• [PATCH 1/7] ARM: nomadik: register GPIOs dynamically   Linus Walleij
• [PATCH 2/7] ARM: nomadik: register AMBA devices dynamically   Linus Walleij
• [PATCH 3/7] ARM: nomadik: register PL031 RTC   Linus Walleij
• [PATCH 4/7] ARM: nomadik: convert to generic clock   Linus Walleij
• [PATCH 5/7] ARM: nomadik: register all three I2C busses   Linus Walleij
• [PATCH 6/7] ARM: nomadik: register the I2C devices   Linus Walleij
• [PATCH 7/7] ARM: nomadik: register the MMC/SD device   Linus Walleij
• [PATCH v2] ARM: highbank: Add smc calls to enable/disable the L2   Rob Herring
• Fwd: + clk-add-non-config_have_clk-routines.patch added to -mm tree   Fengguang Wu
• Fwd: + clk-add-non-config_have_clk-routines.patch added to -mm tree   Fengguang Wu
• Fwd: + clk-add-non-config_have_clk-routines.patch added to -mm tree   Russell King - ARM Linux
• Fwd: + clk-add-non-config_have_clk-routines.patch added to -mm tree   Fengguang Wu
• Fwd: + clk-add-non-config_have_clk-routines.patch added to -mm tree   Russell King - ARM Linux
• [PATCH v2 1/3] ARM: imx6q: add DT node for apbh-dma   Huang Shijie
• [PATCH v2 2/3] ARM: imx6q: add clock for apbh-dma   Huang Shijie
• [PATCH v2 3/3] dma: enable mxs-dma for imx6q   Huang Shijie
• [PATCH v4] usb: ehci-hcd: notify phy when connect change   Chen Peter-B29397
• [PATCH] gpio/mxc: make irqs work for fsl,imx21-gpio devices   Shawn Guo
• [PATCH 4/4] ARM i.MX5: Add nand oftree support   Shawn Guo
• [PATCH v2 3/3] dma: enable mxs-dma for imx6q   Shawn Guo
• [PATCH v4] usb: ehci-hcd: notify phy when connect change   Richard Zhao
• [PATCH v2 1/3] ARM: imx6q: add DT node for apbh-dma   Shawn Guo
• [PATCH v2 2/3] ARM: imx6q: add clock for apbh-dma   Shawn Guo
• [PATCH 1/2] ARM i.MX51: setup mipi   Shawn Guo
• [PATCH v4] usb: ehci-hcd: notify phy when connect change   Chen Peter-B29397
• [PATCH] ARM: mxs: Enable MACH_APX4DEVKIT   Shawn Guo
• [PATCH] clk: validate pointer in __clk_disable()   Fengguang Wu
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Rajendra Nayak
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation   Bryan Wu
• [PATCH 1/2] ARM i.MX51: setup mipi   David Jander
• [PATCH 00/11] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc   Paul Walmsley
• [PATCH 01/11] ARM: OMAP2+: hwmod: add setup_preprogram hook   Paul Walmsley
• [PATCH 02/11] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Paul Walmsley
• [PATCH 03/11] ARM: OMAP4: hwmod data: add SL2IF hardreset line   Paul Walmsley
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCH 06/11] ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby   Paul Walmsley
• [PATCH 07/11] ARM: OMAP: PM: Lock clocks list while generating summary   Paul Walmsley
• [PATCH 08/11] ARM: OMAP2+: CM: increase the module disable timeout   Paul Walmsley
• [PATCH 09/11] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Paul Walmsley
• [PATCH 10/11] ARM: OMAP2+: hwmod: add flag to prevent hwmod code from touching IP block during init   Paul Walmsley
• [PATCH 11/11] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init   Paul Walmsley
• [PATCH] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Rajendra Nayak
• [PATCH 09/11] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Rajendra Nayak
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Hiremath, Vaibhav
• [PATCH] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Paul Walmsley
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCH 1/2] ARM i.MX51: setup mipi   Shawn Guo
• [PATCH 02/11] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Tony Lindgren
• [PATCH 1/4] ARM: at91: at91 based machines specify their own irq handler at run time   ludovic.desroches
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH 02/11] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Paul Walmsley
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Felipe Balbi
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH 02/11] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Tony Lindgren
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Felipe Balbi
• [PATCH 1/2] ARM i.MX51: setup mipi   David Jander
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Cousson, Benoit
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH v6] MTD: LPC32xx SLC NAND driver   Russell King - ARM Linux
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Felipe Balbi
• [PATCH 7/7] ARM: nomadik: register the MMC/SD device   Russell King - ARM Linux
• [RESEND PATCH] dma: imx-sdma: buf_tail should be initialize in prepare function   Vinod Koul
• [PATCH 1/2] ARM i.MX51: setup mipi   Sascha Hauer
• [PATCH v6] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [PATCH v1 1/5] dmaengine: mmp_tdma: add mmp tdma support   Vinod Koul
• [PATCH v1 2/5] ASoC: mmp: add audio dma support   Vinod Koul
• [PATCH v2 3/3] dma: enable mxs-dma for imx6q   Vinod Koul
• [PATCH 4/4] ARM i.MX5: Add nand oftree support   Sascha Hauer
• [alsa-devel] [PATCH v1 2/5] ASoC: mmp: add audio dma support   zhangfei gao
• [alsa-devel] [PATCH v1 2/5] ASoC: mmp: add audio dma support   Vinod Koul
•   Sascha Hauer
• [PATCH] ARM: at91: remove two unused headers   Paul Bolle
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH v7] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH v6] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [CFT] DMA engine patches   Russell King - ARM Linux
• [alsa-devel] [PATCH v1 1/5] dmaengine: mmp_tdma: add mmp tdma support   zhangfei gao
• [CFT 1/3] dmaengine: split out virtual channel DMA support from sa11x0 driver   Russell King
• [CFT 2/3] dmaengine: virt-dma: vchan_find_desc()   Russell King
• [CFT 3/3] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks   Russell King
• [CFT] SA11x0 patches   Russell King - ARM Linux
• [CFT 1/2] dmaengine: sa11x0-dma: fix DMA residue support   Russell King
• [CFT 2/2] dmaengine: sa11x0-dma: add cyclic DMA support   Russell King
• [alsa-devel] [PATCH v1 2/5] ASoC: mmp: add audio dma support   zhangfei gao
• [PATCH 02/11] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Paul Walmsley
• [CFT] PL08x patches   Russell King - ARM Linux
• [CFT 01/31] dmaengine: PL08x: remove runtime PM support   Russell King
• [CFT 02/31] dmaengine: PL08x: fix missed dma_transfer_direction fixup   Russell King
• [CFT 03/31] dmaengine: PL08x: remove redundant spinlock   Russell King
• [CFT 04/31] dmaengine: PL08x: remove circular_buffer boolean from channel data   Russell King
• [CFT 05/31] dmaengine: PL08x: clean up get_signal/put_signal   Russell King
• [CFT 06/31] dmaengine: PL08x: move private data structures into amba-pl08x.c   Russell King
• [CFT 07/31] dmaengine: PL08x: constify channel names and bus_id strings   Russell King
• [CFT 08/31] dmaengine: PL08x: get src/dst addr direct from dma_slave_config struct   Russell King
• [CFT 09/31] dmaengine: PL08x: get rid of device_fc in struct pl08x_dma_chan   Russell King
• [CFT 10/31] dmaengine: PL08x: move the bus and increment selection to dma prepare function   Russell King
• [CFT 11/31] dmaengine: PL08x: extract function to to generate cctl values   Russell King
• [CFT 12/31] dmaengine: PL08x: ignore 'direction' argument in dma_slave_config   Russell King
• [CFT 13/31] dmaengine: PL08x: get rid of unnecessary checks in dma_slave_config   Russell King
• [CFT 14/31] dmaengine: PL08x: split DMA signal muxing from channel alloc   Russell King
• [CFT 15/31] dmaengine: PL08x: move DMA signal muxing into pl08x_dma_chan struct   Russell King
• [CFT 16/31] dmaengine: PL08x: track mux usage on a per-channel basis.   Russell King
• [CFT 17/31] dmaengine: PL08x: convert to a list of completed descriptors   Russell King
• [CFT 18/31] dmaengine: PL08x: move DMA signal muxing into slave prepare code   Russell King
• [CFT 19/31] dmaengine: PL08x: remove waiting descriptor pointer   Russell King
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Tony Lindgren
• [CFT 20/31] dmaengine: PL08x: re-jig the starting of txds   Russell King
• [PATCH] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Rajendra Nayak
• [CFT 21/31] dmaengine: PL08x: split the pend_list in two   Russell King
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [CFT 22/31] dmaengine: PL08x: start next descriptor from irq context   Russell King
• [CFT 23/31] dmaengine: PL08x: rejig physical channel allocation   Russell King
• [CFT 24/31] dmaengine: PL08x: convert to use virt-dma structs   Russell King
• [CFT 25/31] dmaengine: PL08x: use vchan's spinlock   Russell King
• [CFT 26/31] dmaengine: PL08x: convert to use vchan submitted/issued lists   Russell King
• [CFT 27/31] dmaengine: PL08x: convert to use vchan done list   Russell King
• [CFT 28/31] dmaengine: PL08x: fix tx_status function to return correct residue   Russell King
• [CFT 29/31] dmaengine: PL08x: get rid of pl08x_prep_channel_resources   Russell King
• [CFT 30/31] dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking   Russell King
• [CFT 31/31] dmaengine: PL08x: ensure all descriptors are freed when channel is released   Russell King
• [CFT] OMAP patches   Russell King - ARM Linux
• [CFT 01/11] dmaengine: add OMAP DMA engine driver   Russell King
• [PATCH] pinctrl: sirf: mark of_device_id match table as __devinitconst   Linus Walleij
• [CFT 02/11] mmc: omap_hsmmc: add DMA engine support   Russell King
• [CFT 03/11] mmc: omap_hsmmc: remove private DMA API implementation   Russell King
• [CFT 04/11] mmc: omap: add DMA engine support   Russell King
• [CFT 05/11] mmc: omap: remove private DMA API implementation   Russell King
• [CFT 06/11] ARM: omap: remove mmc platform data dma_mask and initialization   Russell King
• [CFT 07/11] spi: omap2-mcspi: add DMA engine support   Russell King
• [PATCH 02/11] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Tony Lindgren
• [CFT 08/11] spi: omap2-mcspi: remove private DMA API implementation   Russell King
• [CFT 09/11] mtd: omap2: add DMA engine support   Russell King
• [CFT 10/11] mtd: omap2: remove private DMA API implementation   Russell King
• [CFT 11/11] Add feature removal of old OMAP private DMA implementation   Russell King
• [alsa-devel] [PATCH v1 2/5] ASoC: mmp: add audio dma support   Vinod Koul
• [alsa-devel] [PATCH v1 1/5] dmaengine: mmp_tdma: add mmp tdma support   Vinod Koul
• [PATCH] ARM: at91: remove two unused headers   Nicolas Ferre
• [PATCH] ARM: at91: fix at91_aic_write macro   Nicolas Ferre
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Cousson, Benoit
• [PATCH v7] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [CFT 01/11] dmaengine: add OMAP DMA engine driver   S, Venkatraman
• [CFT 01/11] dmaengine: add OMAP DMA engine driver   S, Venkatraman
•   Artem Bityutskiy
• [CFT 09/11] mtd: omap2: add DMA engine support   Artem Bityutskiy
• [CFT 09/11] mtd: omap2: add DMA engine support   Russell King - ARM Linux
• [alsa-devel] [PATCH v1 2/5] ASoC: mmp: add audio dma support   zhangfei gao
• [PATCH v2] ARM: at91: add support for Telit EVK GE863-PRO3   Nicolas Ferre
• [CFT 09/11] mtd: omap2: add DMA engine support   Artem Bityutskiy
• [alsa-devel] [PATCH v1 1/5] dmaengine: mmp_tdma: add mmp tdma support   zhangfei gao
• [PATCH 1/2] ARM i.MX51: setup mipi   Shawn Guo
• [PATCH v2] serial: Add driver for LPC32xx High Speed UARTs   Roland Stigge
• [PATCH V2 0/3] i2c-nomadik changes   Alessandro Rubini
• [PATCH V2 1/3] i2c-nomadik: move header to <linux/platform_data/i2c-nomadik.h>   Alessandro Rubini
• [PATCH V2 2/3] i2c-nomadik: turn the platform driver to an amba driver   Alessandro Rubini
• [PATCH V2 3/3] i2c-nomadik: depend on ARM_AMBA, not PLAT_NOMADIK   Alessandro Rubini
• [PATCH] ARM: s3c24xx: remove unused header   Paul Bolle
• [GIT PULL] imx fixes for v3.5-rc   Shawn Guo
• [PATCH] ARM: bpf_jit: BPF_S_ANC_ALU_XOR_X support   Mircea Gherzan
• [PATCH v7 00/12] Per SoC descriptor   Marc Zyngier
• [PATCH v7 01/12] ARM: SoC: Introduce per SoC descriptor   Marc Zyngier
• [PATCH v7 02/12] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [PATCH v7 03/12] ARM: SoC: convert VExpress/RealView to SoC descriptor   Marc Zyngier
• [PATCH v7 04/12] ARM: SoC: convert OMAP4 to SoC descriptor   Marc Zyngier
• [PATCH v7 05/12] ARM: SoC: convert Tegra to SoC descriptor   Marc Zyngier
• [PATCH v7 06/12] ARM: SoC: convert Exynos4 to SoC descriptor   Marc Zyngier
• [PATCH v7 07/12] ARM: SoC: convert MSM SMP to SoC descriptor   Marc Zyngier
• [PATCH v7 08/12] ARM: SoC: convert ux500 to SoC descriptor   Marc Zyngier
• [PATCH v7 09/12] ARM: SoC: convert shmobile SMP to SoC descriptor   Marc Zyngier
• [PATCH v7 10/12] ARM: SoC: convert highbank to SoC descriptor   Marc Zyngier
• [PATCH v7 11/12] ARM: SoC: convert imx6q to SoC descriptor   Marc Zyngier
• [PATCH v7 12/12] ARM: smp: Make SoC descriptor mandatory for SMP platforms   Marc Zyngier
• how to specify dma_mask and coherent_dma_mask in hwmod   N, Mugunthan V
• [CFT 02/11] mmc: omap_hsmmc: add DMA engine support   Tony Lindgren
• [CFT 03/11] mmc: omap_hsmmc: remove private DMA API implementation   Tony Lindgren
• [CFT 04/11] mmc: omap: add DMA engine support   Tony Lindgren
• [CFT 05/11] mmc: omap: remove private DMA API implementation   Tony Lindgren
• [CFT 06/11] ARM: omap: remove mmc platform data dma_mask and initialization   Tony Lindgren
• [CFT 11/11] Add feature removal of old OMAP private DMA implementation   Tony Lindgren
• [CFT 09/11] mtd: omap2: add DMA engine support   Tony Lindgren
• [PATCH] media: mx2_camera: Add YUYV output format.   Fabio Estevam
• [CFT 03/11] mmc: omap_hsmmc: remove private DMA API implementation   S, Venkatraman
• [PATCH 7/7 v2] ARM: nomadik: register the MMC/SD device   Linus Walleij
• [PATCH] ARM: mx35: add WEIM register addresses   Sascha Hauer
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Hiremath, Vaibhav
• [PATCH] ARM: mx35: add WEIM register addresses   Christoph Fritz
• [GIT PULL] imx fixes for v3.5-rc   Olof Johansson
• [PATCH 0/2] A couple of imx6q clock patches   Olof Johansson
• [PATCH] ARM: mx35: add WEIM register addresses   Sascha Hauer
• [GIT PULL] more i.MX clock fixes   Sascha Hauer
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [GIT PULL] i.MX fixes   Sascha Hauer
• [PATCH v7 07/12] ARM: SoC: convert MSM SMP to SoC descriptor   David Brown
• [PATCH 1/3] spi-orion: add device tree binding   Jason Cooper
• [PATCH V2 00/10] ARM: OMAP4: Add PMU Support   Jon Hunter
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Jon Hunter
• [PATCH V2 02/10] ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD   Jon Hunter
• [PATCH V2 03/10] ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS   Jon Hunter
• [PATCH V2 04/10] ARM: OMAP4430: Create PMU device via HWMOD   Jon Hunter
• [PATCH V2 05/10] ARM: OMAP2+: PMU: Add runtime PM support   Jon Hunter
• [PATCH V2 06/10] ARM: OMAP4: Route PMU IRQs to CTI IRQs   Jon Hunter
• [PATCH V2 07/10] ARM: OMAP4: CLKDM: Update supported transition modes   Jon Hunter
• [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use   Jon Hunter
• [PATCH V2 09/10] ARM: OMAP4: Enable PMU for OMAP4460/70   Jon Hunter
• [PATCH V2 10/10] ARM: OMAP2+: PMU: Add QoS constraint   Jon Hunter
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH 0/2] arm/dts: Add OMAP2420 SDP support   Jon Hunter
• [PATCH 0/2] arm/dts: Add OMAP2420 SDP support   Jon Hunter
• [PATCH 1/2] arm/dts: OMAP2: Add support for OMAP2420 SDP   Jon Hunter
• [PATCH 2/2] arm/dts: OMAP2: Fix interrupt controller binding   Jon Hunter
• [PATCH 1/2] arm/dts: OMAP2: Add support for OMAP2420 SDP   Jon Hunter
• [PATCH v1 3/5] ASOC: mmp: add sspa support   Mark Brown
• [PATCH V2 0/2] arm/dts: Add OMAP2420 SDP support   Jon Hunter
• [PATCH V2 1/2] arm/dts: OMAP2: Add support for OMAP2420 SDP   Jon Hunter
• [PATCH V2 2/2] arm/dts: OMAP2: Fix interrupt controller binding   Jon Hunter
• [PATCH v1 4/5] ASoC: add mmp brownstone support   Mark Brown
• [PATCH V2 00/10] ARM: OMAP4: Add PMU Support   Jon Hunter
• Freescale fec.c driver breakage   Mark Brown
• [PATCH 3/3] ASoC: follow the updated samsung DMA common operations   Mark Brown
• [PATCH v2] ARM: highbank: Add smc calls to enable/disable the L2   Rob Herring
• [PATCH] arm: OMAP depends on MMU   mathieu.poirier at linaro.org
• [PATCH v7 10/12] ARM: SoC: convert highbank to SoC descriptor   Rob Herring
• [PATCH v3 8/9] ASoC: tegra: add clk_prepare/clk_unprepare   Mark Brown
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH v3 8/9] ASoC: tegra: add clk_prepare/clk_unprepare   Pankaj Jangra
• [PATCH v3 8/9] ASoC: tegra: add clk_prepare/clk_unprepare   Prashant Gaikwad
• [CFT 11/11] Add feature removal of old OMAP private DMA implementation   Shilimkar, Santosh
• [CFT 01/11] dmaengine: add OMAP DMA engine driver   Shilimkar, Santosh
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH] media: mx2_camera: Add YUYV output format.   javier Martin
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   javier Martin
• [GIT PULL] omap fixes for v3.5-rc1   Tony Lindgren
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   javier Martin
• [PATCH] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Paul Walmsley
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   Robert Schwebel
• Overriding/concatenating kernel command-line with bootargs from dtb?   Florian Fainelli
• [PATCH] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Rajendra Nayak
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation   Olof Johansson
• [PATCH v2] ARM: highbank: Add smc calls to enable/disable the L2   Olof Johansson
• [GIT PULL] more i.MX clock fixes   Olof Johansson
• [GIT PULL] i.MX fixes   Olof Johansson
• [GIT PULL] omap fixes for v3.5-rc1   Olof Johansson
• [CFT] PL08x patches   Linus Walleij
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   Sascha Hauer
• [CFT 07/11] spi: omap2-mcspi: add DMA engine support   Linus Walleij
• [CFT 04/11] mmc: omap: add DMA engine support   Linus Walleij
• [CFT 02/11] mmc: omap_hsmmc: add DMA engine support   Linus Walleij
• [PATCH] ARM: iconnect: Remove include of removed linux/spi/orion_spi.h   Andrew Lunn
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   javier Martin
• [CFT 01/11] dmaengine: add OMAP DMA engine driver   Russell King - ARM Linux
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   javier Martin
• [PATCH] ARM: iconnect: Remove include of removed linux/spi/orion_spi.h   Arnaud Patard (Rtp)
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   Sascha Hauer
• [PATCH v7 03/12] ARM: SoC: convert VExpress/RealView to SoC descriptor   Pawel Moll
• [PATCH v2] ARM: iconnect: Remove include of removed linux/spi/orion_spi.h   Andrew Lunn
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Will Deacon
• [CFT 01/11] dmaengine: add OMAP DMA engine driver   Shilimkar, Santosh
• [CFT 01/11] dmaengine: add OMAP DMA engine driver   Russell King - ARM Linux
• [PATCH] ARM: imx27/dt: make dt_compat entry const   Uwe Kleine-König
• mach/io.h cleanup and removal question   Andrew Lunn
• [RESEND/PATCHv5 1/2] drivers: input: keypad: Add device tree support   Sourav Poddar
• [RESEND/PATCHv5 2/2] arm/dts: omap4-sdp: Add keypad data   Sourav Poddar
• [RFC PATCH] MTD: nand: add return value for write_page() function in structure of nand_ecc_ctrl.   Josh Wu
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   javier Martin
• mach/io.h cleanup and removal question   Russell King - ARM Linux
• [PATCH 1/3] pinctrl: add samsung pinctrl and gpiolib driver   Tony Lindgren
• [PATCH 1/2] USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phy   Richard Zhao
• [PATCH v5 2/2] USB: notify phy when root hub port connect change   Richard Zhao
• [PATCH v4] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH 1/2] ARM: vexpress: Check master site in daughterboard's sysctl operations   Pawel Moll
• [PATCH 2/2] ARM: vexpress: Initial common clock support   Pawel Moll
• [PATCH] clk: Check parent for NULL in clk_change_rate   Pawel Moll
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Cousson, Benoit
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Tero Kristo
• [alsa-devel] [PATCH v1 4/5] ASoC: add mmp brownstone support   zhangfei gao
• [alsa-devel] [PATCH v1 3/5] ASOC: mmp: add sspa support   zhangfei gao
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH 00/11] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc   Tero Kristo
• [PATCH 1/1] pinctrl: pinctrl-imx: fix incorrect debug message of maps   Dong Aisheng
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Kim, Jong-Sung
• [PATCH 0/7] arm/dts: Audio support for OMAP4 devices (SDP, PandaBoard)   Peter Ujfalusi
• [PATCH 1/7] arm/dts: omap4: Add entry for OMAP McPDM IP   Peter Ujfalusi
• [PATCH 2/7] arm/dts: omap4: Add entry for OMAP DMIC IP   Peter Ujfalusi
• [PATCH 3/7] arm/dts: omap4-sdp: Add fixed regulator to represent VBAT   Peter Ujfalusi
• [PATCH 4/7] arm/dts: omap4-sdp: Add support for twl6040   Peter Ujfalusi
• [PATCH 5/7] arm/dts: omap4-sdp: Enable audio support via device tree   Peter Ujfalusi
• [PATCH 6/7] arm/dts: omap4-panda: Audio support for PandaBoard 4430   Peter Ujfalusi
• [PATCH 7/7] arm/dts: New dts file for PandaBoardES (4460)   Peter Ujfalusi
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Andrew Lunn
• [PATCH] arm: omap: drop unused IRQ defines   Felipe Balbi
• mach/io.h cleanup and removal question   Rob Herring
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Jon Hunter
• [PATCH] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Paul Walmsley
• mach/io.h cleanup and removal question   Andrew Lunn
• [PATCH v7 00/12] Per SoC descriptor   Arnd Bergmann
• [PATCH v2 0/4] syscall_trace fixes and cleanups   Will Deacon
• [PATCH v2 1/4] audit: arm: only allow syscall auditing for pure EABI userspace   Will Deacon
• [PATCH v2 2/4] ARM: entry: don't bother with syscall tracing on ret_from_fork path   Will Deacon
• [PATCH v2 3/4] ARM: audit: move syscall auditing until after ptrace SIGTRAP handling   Will Deacon
• [PATCH v2 4/4] ARM: ptrace: provide separate functions for tracing syscall {entry, exit}   Will Deacon
• [PATCH v3] ARM: mm: update CONTEXTIDR register to contain PID of current process   Will Deacon
• [PATCH] ARM: perf: remove arm_perf_pmu_ids global enumeration   Will Deacon
• [PATCH] ARM: extable: ensure fixup entries are 4-byte aligned   Will Deacon
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Jon Hunter
• [RFC] Support for H.264/MPEG4 encoder (VPU) in i.MX27.   Sascha Hauer
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Arnd Bergmann
• [RFC PATCH 0/2] Implement word-at-a-time string functions   Will Deacon
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Will Deacon
• [RFC PATCH 2/2] ARM: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs   Will Deacon
• [PATCH] MXS: Add DT binding support into stmp3xxx-rtc   Marek Vasut
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Will Deacon
• [PATCH 7/7 v2] ARM: nomadik: register the MMC/SD device   Arnd Bergmann
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Andrew Lunn
• [PATCH V2 2/3] i2c-nomadik: turn the platform driver to an amba driver   Linus Walleij
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Jon Medhurst (Tixy)
• [PATCH] MXS: Add DENX M28 dts file   Marek Vasut
• [CFT 11/11] Add feature removal of old OMAP private DMA implementation   Rob Landley
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Andrew Lunn
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 2/2 V2] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc   Marek Vasut
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Marek Vasut
• [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc   Rob Herring
• [PATCH] MXS: Add DENX M28 dts file   Marek Vasut
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Hiremath, Vaibhav
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Hiremath, Vaibhav
• [PATCH v3 7/9] staging: nvec: add clk_prepare/clk_unprepare   Marc Dietrich
• [GIT PULL] i.MX fixes   Fabio Estevam
• Overriding/concatenating kernel command-line with bootargs from dtb?   Nicolas Pitre
• [PATCH 0/6] drivers: randconfig patches for kernel 3.5   mathieu.poirier at linaro.org
• [PATCH RESEND 1/6] drivers/video: use correct __devexit_p annotation   mathieu.poirier at linaro.org
• [PATCH RESEND 2/6] mg_disk: use readb/writeb instead of inb/outb   mathieu.poirier at linaro.org
• [PATCH RESEND 3/6] video/ili9320: do not mark exported functions __devexit   mathieu.poirier at linaro.org
• [PATCH RESEND 4/6] video/console: automatically select a font   mathieu.poirier at linaro.org
• [PATCH RESEND 5/6] drivers/savagefb: use mdelay instead of udelay   mathieu.poirier at linaro.org
• [PATCH RESEND 6/6] drivers/tosa: driver needs I2C and SPI to compile   mathieu.poirier at linaro.org
• [PATCH] clk: validate pointer in __clk_disable()   Andrew Morton
• AM335x CPSW reset (was "RE: [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)")   Paul Walmsley
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCH] MXS: Fix the gpmi/gpmi-nand DT name   Marek Vasut
• [PATCH] ARM: plat-versatile: Make PLAT_VERSATILE_LEDS depend on LEDS_CLASS=y   Axel Lin
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 0/6] drivers: randconfig patches for kernel 3.5   Arnd Bergmann
• [PATCH 00/11] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc   Paul Walmsley
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Shubhrajyoti Datta
• [PATCH 2/6] arm: fix compiler warning by properly inlining flat_set_persistent()   Ezequiel Garcia
• [CFT 11/11] Add feature removal of old OMAP private DMA implementation   Russell King - ARM Linux
• AM335x CPSW reset (was "RE: [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)")   Hiremath, Vaibhav
• [GIT PULL] i.MX fixes   Sascha Hauer
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Sascha Hauer
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Sascha Hauer
• [PATCH 1/2] ARM i.MX51: setup mipi   Sascha Hauer
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 2/2 V2] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE - patch proposal: for ep9302 i2c support is not enabled in kernel - submit patch to enable it & merge it in the newer kernels   Todor Colov
• [PATCH v2 0/4] syscall_trace fixes and cleanups   Russell King - ARM Linux
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Shubhrajyoti Datta
• [PATCH 0/6] drivers: randconfig patches for kernel 3.5   Florian Tobias Schandinat
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH] ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2   Vaibhav Hiremath
• AM335x CPSW reset (was "RE: [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)")   Paul Walmsley
• [PATCH 0/6] drivers: randconfig patches for kernel 3.5   Arnd Bergmann
• ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE - patch proposal: for ep9302 i2c support is not enabled in kernel - submit patch to enable it & merge it in the newer kernels   Ryan Mallon
• [PATCHv10 00/11] I2C fixes   Shubhrajyoti Datta
• arch/arm/mach-s3c2410/Kconfig is unsourced   Paul Bolle
• [CFT 05/31] dmaengine: PL08x: clean up get_signal/put_signal   Russell King - ARM Linux
• RFC: changing DMA slave configuration API   Russell King - ARM Linux
• [PATCH 0/9] Kirkwood DT support For IRQ, SPI, I2C, GPIO   Andrew Lunn
• [PATCH 1/9] ARM: Kirkwood: Add interrupt controller support for DT boards   Andrew Lunn
• [PATCH 2/9] SPI: Refactor spi-orion to use SPI framework queue.   Andrew Lunn
• [PATCH 3/9] spi-orion: remove uneeded spi_info   Andrew Lunn
• [PATCH 4/9] spi-orion: add device tree binding   Andrew Lunn
• [PATCH 5/9] ARM: kirkwood: use devicetree for orion-spi   Andrew Lunn
• [PATCH 6/9] ARM: kirkwood: use devicetree for SPI on dreamplug   Andrew Lunn
• [PATCH 7/9] I2C: MV64XXX: Add Device Tree support   Andrew Lunn
• [PATCH 8/9] ARM: Kirkwood: Add DT support for GPIO controllers   Andrew Lunn
• [PATCH 9/9] Kirkwood: Add basic device tree support for QNAP TS219.   Andrew Lunn
• [PATCH] pinctrl: sirf: mark of_device_id match table as __devinitconst   Barry Song
• When switch_mm with thread migration, Why flush instruction cache ?   Li Haifeng
• RFC: changing DMA slave configuration API   Barry Song
• RFC: changing DMA slave configuration API   Russell King - ARM Linux
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• When switch_mm with thread migration, Why flush instruction cache ?   Li Haifeng
• [PATCH] arm: ep93xx: Enable i2c support for ep9302   Todor Colov
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Barry Song
• [PATCH 2/9] SPI: Refactor spi-orion to use SPI framework queue.   Linus Walleij
• [PATCH V2 0/6] Bridging PCI to amba   Linus Walleij
• [PATCH 0/9] Kirkwood DT support For IRQ, SPI, I2C, GPIO   Jason Cooper
• [PATCH 1/9] ARM: Kirkwood: Add interrupt controller support for DT boards   Jason Cooper
• [PATCH 4/9] spi-orion: add device tree binding   Jason Cooper
• [PATCH 5/9] ARM: kirkwood: use devicetree for orion-spi   Jason Cooper
• [PATCH 6/9] ARM: kirkwood: use devicetree for SPI on dreamplug   Jason Cooper
• [PATCH 7/9] I2C: MV64XXX: Add Device Tree support   Jason Cooper
• [PATCH 8/9] ARM: Kirkwood: Add DT support for GPIO controllers   Jason Cooper
• [PATCH 9/9] Kirkwood: Add basic device tree support for QNAP TS219.   Jason Cooper
• [PATCH] serial/imx: enable the clock when we really use the uart port   Fabio Estevam
• [PATCH] ARM: nomadik: bump all IRQ numbers by one   Linus Walleij
• ARM: iMX: lockup with irqs disabled in drivers/tty/imx.c   Fabio Estevam
• [PATCH 9/9] Kirkwood: Add basic device tree support for QNAP TS219.   Andrew Lunn
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Simon Baatz
• [PATCH v2] usb: fsl_udc: errata - postpone freeing current dTD   Fabio Estevam
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Andrew Lunn
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Simon Baatz
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Simon Baatz
• [PATCH 1/9] ARM: Kirkwood: Add interrupt controller support for DT boards   Michael Walle
• [PATCH 9/9] Kirkwood: Add basic device tree support for QNAP TS219.   Michael Walle
• [PATCH] ARM: nomadik: bump all IRQ numbers by one   Rob Herring
• [PATCH 8/9] ARM: Kirkwood: Add DT support for GPIO controllers   Rob Herring
• [PATCH 9/9] Kirkwood: Add basic device tree support for QNAP TS219.   Jason Cooper
• [PATCH] arm: ep93xx: Enable i2c support for ep9302   Ryan Mallon
• [PATCHv2 00/12] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc   Paul Walmsley
• [PATCHv2 01/12] ARM: OMAP: PM: Lock clocks list while generating summary   Paul Walmsley
• [PATCHv2 02/12] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCHv2 03/12] ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby   Paul Walmsley
• [PATCHv2 04/12] ARM: OMAP4: hwmod data: fix 32k sync timer idle modes   Paul Walmsley
• [PATCHv2 05/12] ARM: OMAP2+: hwmod: add setup_preprogram hook   Paul Walmsley
• [PATCHv2 06/12] ARM: OMAP2+: hwmod: add flag to prevent hwmod code from touching IP block during init   Paul Walmsley
• [PATCHv2 07/12] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Paul Walmsley
• [PATCHv2 08/12] ARM: OMAP4: hwmod data: add SL2IF hardreset line   Paul Walmsley
• [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb)   Paul Walmsley
• [PATCHv2 10/12] ARM: OMAP2+: CM: increase the module disable timeout   Paul Walmsley
• [PATCHv2 11/12] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Paul Walmsley
• [PATCHv2 12/12] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init   Paul Walmsley
• [PATCH 1/3] mx3fb: do not support panning with fb blanked   Liu Ying
• [PATCH 2/3] mx3fb: support pan display with fb_set_var   Liu Ying
• [PATCH 3/3] mx3fb: avoid screen flash when panning with fb_set_var   Liu Ying
• [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data   Paul Walmsley
• [PATCH] serial/imx: enable the clock when we really use the uart port   Huang Shijie
• [PATCH 1/1] mx3fb: support pan display with fb_set_var   Liu Ying
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   Ming Lei
• [PATCH v7 02/12] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Shawn Guo
• [PATCH v7 11/12] ARM: SoC: convert imx6q to SoC descriptor   Shawn Guo
• [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc   Shawn Guo
• [PATCH 00/08] mach-shmobile: Emma Mobile EV2 support V3   Paul Mundt
• [GIT PULL] imx fixes for v3.5-rc (part 2)   Shawn Guo
• RFC: changing DMA slave configuration API   Vinod Koul
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Kyungmin Park
• [PATCH] MXS: Add DENX M28 dts file   Shawn Guo
• [PATCH] ARM: update die handler from x86   Rabin Vincent
• [PATCH] MXS: Add DENX M28 dts file   Shawn Guo
• [PATCH] MXS: Add DENX M28 dts file   Huang Shijie
• [RFC] kernel, logbuf: add support for external log buffer   Heiko Schocher
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH RESEND] mfd: anatop: permit adata be NULL when access register   Shawn Guo
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH RESEND] mfd: anatop: permit adata be NULL when access register   Ying-Chun Liu (PaulLiu)
• [PATCHv2 07/12] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Tony Lindgren
• [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH] ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2   Tony Lindgren
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Shawn Guo
• [PATCH 0/3] ARM: OMAP2/3: DSS HWMOD fixes   Tomi Valkeinen
• [PATCH] arm: omap: drop unused IRQ defines   Tony Lindgren
• [PATCH] ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2   Vaibhav Hiremath
• [PATCH] ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2   Tony Lindgren
• [PATCH] MXS: Fix the gpmi/gpmi-nand DT name   Shawn Guo
• [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb)   Felipe Balbi
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Shawn Guo
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   Ming Lei
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Shawn Guo
• [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb)   Tony Lindgren
• [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb)   Felipe Balbi
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Roland Stigge
• [PATCH 2/3] net: lpc_eth: Increase number of TX descriptors   Roland Stigge
• [PATCH 3/3] net: lpc_eth: Driver cleanup   Roland Stigge
• [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb)   Tony Lindgren
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   David Miller
• [PATCH 2/3] net: lpc_eth: Increase number of TX descriptors   David Miller
• [PATCH] gpio: LPC32xx: Driver cleanup   Roland Stigge
• v3.4 boot failure on qemu-system-arm -M versatilepb   Ben Dooks
• [PATCH][RFC] mm: Don't put CMA pages on per-cpu lists   Marek Szyprowski
• [PATCH] ARM: kprobes: run t32_simulate_ldr_literal() without insn slot   Rabin Vincent
• [PATCH 2/3] net: lpc_eth: Increase number of TX descriptors   Eric Dumazet
• RFC: changing DMA slave configuration API   Russell King - ARM Linux
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Eric Dumazet
• v3.4 boot failure on qemu-system-arm -M versatilepb   Russell King - ARM Linux
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Roland Stigge
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Eric Dumazet
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Eric Dumazet
• [PATCH] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Rajendra Nayak
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   David Miller
• [PATCH] ARM: EXYNOS: Add smc call to support trustzone feature   Kyungmin Park
• [PATCH 05/11] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Cousson, Benoit
• [PATCHv2 09/12] ARM: OMAP2+: usb_host_fs: add custom setup_preprogram for usb_host_fs (fsusb)   Felipe Balbi
• [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data   Vaibhav Hiremath
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Cousson, Benoit
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Roland Stigge
• Current state of AM33xx patches   Daniel Mack
• [PATCHv2 04/12] ARM: OMAP4: hwmod data: fix 32k sync timer idle modes   Cousson, Benoit
• RFC: changing DMA slave configuration API   Dong Aisheng
• [PATCH 1/2] ARM i.MX51: setup mipi   Shawn Guo
• [PATCH] ARM: EXYNOS: Add smc call to support trustzone feature   Russell King - ARM Linux
• [PATCH 1/3] mx3fb: do not support panning with fb blanked   Russell King - ARM Linux
• [PATCHv2 12/12] ARM: OMAP4: hwmod data: do not enable or reset the McPDM during kernel init   Cousson, Benoit
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Lee Jones
• [PATCH v2 0/5] mmp audio support   Zhangfei Gao
• [PATCH v2 1/5] dmaengine: mmp_tdma: add mmp tdma support   Zhangfei Gao
• [PATCH v2 2/5] ASoC: mmp: add audio dma support   Zhangfei Gao
• [PATCH v2 3/5] ASOC: mmp: add sspa support   Zhangfei Gao
• [PATCH v2 4/5] ASoC: add mmp brownstone support   Zhangfei Gao
• [PATCH v2 5/5] ASoC: add ttc-dkb machine support   Zhangfei Gao
• [PATCH] ARM: EXYNOS: Add smc call to support trustzone feature   Marek Szyprowski
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH 6.2/7] MMC: mmci: Enable Device Tree support for ux500   Linus Walleij
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH 1/3] mx3fb: do not support panning with fb blanked   Liu Ying
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH] MXS: Add DENX M28 dts file   Marek Vasut
• [PATCH 0/14] ARM: LPC32xx specific updates for next   Roland Stigge
• [PATCH 1/14] ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts   Roland Stigge
• [PATCH 2/14] ARM: LPC32xx: Clock initialization for NAND controllers   Roland Stigge
• [PATCH 3/14] ARM: LPC32xx: Remove SLC controller initialization from platform init   Roland Stigge
• [PATCH 4/14] ARM: LPC32xx: Add DMA configuration to platform data   Roland Stigge
• [PATCH 5/14] ARM: LPC32xx: Adjust dtsi file for MLC controller configuration   Roland Stigge
• [PATCH 6/14] ARM: LPC32xx: Add dts for EA3250 reference board   Roland Stigge
• [PATCH 7/14] ARM: LPC32xx: DTS adjustment for key matrix controller   Roland Stigge
• [PATCH 8/14] ARM: LPC32xx: Clock adjustment for key matrix controller   Roland Stigge
• [PATCH 9/14] ARM: LPC32xx: Defconfig update   Roland Stigge
• [PATCH 10/14] ARM: LPC32xx: Add MMC controller support   Roland Stigge
• [PATCH 11/14] ARM: LPC32xx: DTS adjustment for using pl18x primecell   Roland Stigge
• [PATCH 12/14] ARM: LPC32xx: DT conversion of Standard UARTs   Roland Stigge
• [PATCH 13/14] ARM: LPC32xx: High Speed UART configuration via DT   Roland Stigge
• [PATCH 14/14] ARM: LPC32xx: Remove mach specific ARCH_NR_GPIOS, use default   Roland Stigge
• [PATCH 1/3] mx3fb: do not support panning with fb blanked   Russell King - ARM Linux
• [PATCH 4/14] ARM: LPC32xx: Add DMA configuration to platform data   Russell King - ARM Linux
• [PATCH 1/3] mx3fb: do not support panning with fb blanked   Liu Ying
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Lee Jones
• [PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree   Mark Brown
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Mark Brown
• [PATCH] regulator: Add ramp_delay to regulator constraints to get used as a configurable parameter.   Yadwinder Singh Brar
• [PATCH] ARM: Kirkwood: Fix crash when neither NAND nor SPI   Andrew Lunn
• am33xx: pin modes   Yegor Yefremov
• [PATCH 1/1] ARM: dma-mapping: Add missing static storage class specifier   Marek Szyprowski
• [PATCH 1/9] ARM: Kirkwood: Add interrupt controller support for DT boards   Rob Herring
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Zdenek Kabelac
• Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory   Zdenek Kabelac
• [PATCH v2] ARM: OMAP2/3: hwmod data: add gpmc   Afzal Mohammed
• [PATCH] ARM: OMAP2+: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Vaibhav Hiremath
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• am33xx: pin modes   Hebbar, Gururaja
• Current state of AM33xx patches   Jason Kridner
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Tony Lindgren
• [PATCH 0/5] OMAP3530evm misc fixes for linux-omap   Zumeng Chen
• [PATCH 1/5] ARM: OMAP3EVM: Add NAND flash definition   Zumeng Chen
• [PATCH 2/5] ARM: OMAP3EVM: Adding USB internal LDOs board file   Zumeng Chen
• [PATCH 3/5] ARM: omap3evm: enable VBUS switch for EHCI tranceiver   Zumeng Chen
• [PATCH 4/5] MFD: OMAP3EVM: USB: cosmetic fix to failed parent clk set   Zumeng Chen
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH 0/3] Prepare for GPMC driver conversion   Afzal Mohammed
• [PATCH 1/3] ARM: OMAP2+: nand: unify init functions   Afzal Mohammed
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Afzal Mohammed
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Afzal Mohammed
• [PATCH] arm: versatile: fix and enable PCI I/O space   Rob Herring
• am33xx: pin modes   Tony Lindgren
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCH 11/14] ARM: LPC32xx: DTS adjustment for using pl18x primecell   Arnd Bergmann
• Current state of AM33xx patches   Vaibhav Hiremath
• [PATCH 8/14] ARM: LPC32xx: Clock adjustment for key matrix controller   Arnd Bergmann
• Current state of AM33xx patches   Hernandez, Carlos
• [PATCH v5 00/14] GPMC driver conversion   Afzal Mohammed
• [PATCH v5 01/14] ARM: OMAP2+: gpmc: platform definitions   Afzal Mohammed
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Afzal Mohammed
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Afzal Mohammed
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Afzal Mohammed
• [PATCH v5 05/14] ARM: OMAP2+: gpmc: resource creation helpers   Afzal Mohammed
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Afzal Mohammed
• [PATCH v5 07/14] ARM: OMAP2+: gpmc: time setting (register#) helper   Afzal Mohammed
• [PATCH v5 08/14] ARM: OMAP2+: gpmc: bool type timing helper   Afzal Mohammed
• [PATCH v5 09/14] ARM: OMAP2+: gpmc: holler if no configuration   Afzal Mohammed
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Afzal Mohammed
• [PATCH v5 11/14] ARM: OMAP2+: gpmc: handle connected peripherals   Afzal Mohammed
• [PATCH v5 12/14] ARM: OMAP2+: gpmc: cs reconfigure helper   Afzal Mohammed
• am33xx: pin modes   Yegor Yefremov
• [PATCH v5 13/14] ARM: OMAP2+: gpmc: update nand register info   Afzal Mohammed
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Mark Brown
• [PATCH v5 14/14] ARM: OMAP2+: gpmc: writeprotect helper   Afzal Mohammed
• [PATCH 11/14] ARM: LPC32xx: DTS adjustment for using pl18x primecell   Roland Stigge
• am33xx: pin modes   Yegor Yefremov
• [PATCH v4] ARM: pxa: hx4700: Fix basic suspend/resume   Paul Parsons
• Overriding/concatenating kernel command-line with bootargs from dtb?   Rob Herring
• [PATCH 8/14] ARM: LPC32xx: Clock adjustment for key matrix controller   Roland Stigge
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Igor Grinberg
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Shawn Guo
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCH 0/5] OMAP3530evm misc fixes for linux-omap   Jon Hunter
• [PATCH 11/14] ARM: LPC32xx: DTS adjustment for using pl18x primecell   Arnd Bergmann
• [PATCH 1/5] ARM: OMAP3EVM: Add NAND flash definition   Jon Hunter
• [PATCH 8/14] ARM: LPC32xx: Clock adjustment for key matrix controller   Arnd Bergmann
• [PATCH 0/9] Adapt GPMC peripherals, platforms to driver   Afzal Mohammed
• [PATCH 1/9] ARM: OMAP2+: gpmc-nand: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 2/9] ARM: OMAP2+: gpmc-onenand: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 3/9] ARM: OMAP2+: flash: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 4/9] ARM: OMAP2+: gpmc-tusb6010: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 5/9] ARM: OMAP2+: gpmc-smc91x: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 6/9] ARM: OMAP2+: gpmc-smsc911x: Adapt to use gpmc driver   Afzal Mohammed
• [PATCH 7/9] ARM: OMAP2+: gpmc-smsc911x: runtime time calculation   Afzal Mohammed
• [PATCH 8/9] ARM: OMAP2+: board omap3evm: use gpmc driver   Afzal Mohammed
• [PATCH 9/9] ARM: OMAP2+: board omap3beagle: use gpmc driver   Afzal Mohammed
• [PATCH 4/5] MFD: OMAP3EVM: USB: cosmetic fix to failed parent clk set   Jon Hunter
• [PATCH v2 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v2 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH v2 02/10] ARM: pci: Keep pci_common_init() around after init   Thierry Reding
• [PATCH v2 03/10] ARM: pci: Allow passing per-controller private data   Thierry Reding
• [PATCH v2 04/10] ARM: tegra: Move tegra_pcie_xclk_clamp() to PMC   Thierry Reding
• [PATCH v2 05/10] ARM: tegra: Rewrite PCIe support as a driver   Thierry Reding
• [PATCH v2 06/10] ARM: tegra: pcie: Add MSI support   Thierry Reding
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v2 08/10] ARM: tegra: harmony: Initialize regulators from DT   Thierry Reding
• [PATCH v2 09/10] ARM: tegra: harmony: Initialize PCIe from DT   Thierry Reding
• [PATCH v2 10/10] ARM: tegra: trimslice: Initialize PCIe from DT   Thierry Reding
• [PATCH] ARM: Fix dts files w/ status property: "disable" -> "disabled"   Roland Stigge
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Mark Brown
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCH 00/14] Final (large) batch of Snowball Device Tree Enablement   Lee Jones
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH 02/14] rtc: Ensure correct probing of the AB8500 RTC when Device Tree is enabled   Lee Jones
• [PATCH 03/14] mfd: ab8500-gpadc: Enable IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH 04/14] mfd: Remove redundant Kconfig entry   Lee Jones
• [PATCH 05/14] mfd: Enable DT probing of the DB8500 PRCMU   Lee Jones
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Lee Jones
• [PATCH 07/14] mfd: Initialise the AB8500 driver at core_initcall time   Lee Jones
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Lee Jones
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 10/14] Input: Add Device Tree support to the ab8500-ponkey driver   Lee Jones
• [PATCH 11/14] usb: otg: Enable probing of the ab8500 during a Device Tree boot   Lee Jones
• [PATCH 12/14] ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree   Lee Jones
• [PATCH 13/14] ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices   Lee Jones
• [PATCH 14/14] ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled   Lee Jones
• [PATCHv6 0/7] ARM: OMAP4: core retention support   Tero Kristo
• [PATCHv6 1/7] ARM: OMAP4: PM: add errata support   Tero Kristo
• [PATCHv6 2/7] ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change.   Tero Kristo
• [PATCHv6 3/7] ARM: OMAP4: hwmod: flag hwmods/modules not supporting module level context status   Tero Kristo
• [PATCHv6 4/7] ARM: OMAP: hwmod: Add support for per hwmod/module context lost count   Tero Kristo
• [PATCHv6 5/7] ARM: OMAP4: pwrdm: add support for reading prev logic and mem states   Tero Kristo
• [PATCHv6 6/7] ARM: OMAP4: suspend: Program all domains to retention   Tero Kristo
• [PATCHv6 7/7] ARM: OMAP4: PM: put all domains to OSWR during suspend   Tero Kristo
• [PATCH V2 0/6] Bridging PCI to amba   Arnd Bergmann
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Arnd Bergmann
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Mark Brown
• [PATCH 1/3] ARM: integrator: put symbolic bus names on devices   Linus Walleij
• [PATCH 2/3] clk: add ICST307 driver   Linus Walleij
• [PATCH 3/3] ARM: integrator: convert to common clock   Linus Walleij
• [PATCH 1/3] ARM: OMAP2+: nand: unify init functions   Jon Hunter
• [PATCH] arm: ep93xx: Enable i2c support for ep9302   H Hartley Sweeten
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Greg Kroah-Hartman
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Nicolas Pitre
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Russell King - ARM Linux
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Lee Jones
• [PATCHv10 00/11] I2C fixes   Wolfram Sang
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH 09/22] regulator: Change db8500-prcmu match names to reflect Device Tree   Mark Brown
• [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data   Paul Walmsley
• [GIT PULL] Nomadik updates   Linus Walleij
• [PATCH 04/11] ARM: OMAP2+: usb_host_fs: add custom reset for usb_host_fs (fsusb)   Paul Walmsley
• [PATCH] ARM: Fix dts files w/ status property: "disable" -> "disabled"   Rob Herring
• [PATCHv2 11/12] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Cousson, Benoit
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Nicolas Pitre
• [GIT PULL] imx fixes for v3.5-rc (part 2)   Olof Johansson
• [PATCH 0/2] ARM: OMAP2+: Fix errors in PRCM hwmods + wrong clkdm   Benoit Cousson
• [PATCH 1/2] ARM: OMAP2+: hwmod data: Fix the wrong clkdm assigned to PRCM modules   Benoit Cousson
• [PATCH 2/2] Revert "ARM: OMAP2+: clockdomains: make {prm, cm}_clkdm common"   Benoit Cousson
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Russell King - ARM Linux
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Gregory CLEMENT
• [PATCH v2 1/8] arm: mach-mvebu: add header   Gregory CLEMENT
• [PATCH v2 2/8] arm: mach-mvebu: add source files   Gregory CLEMENT
• [PATCH v2 3/8] arm: mach-mvebu: add compilation/configuration change   Gregory CLEMENT
• [PATCH v2 4/8] arm: mach-mvebu: add support for Armada 370 and Armada XP with DT   Gregory CLEMENT
• [PATCH v2 5/8] arm: mach-mvebu: add documentation for new device tree bindings   Gregory CLEMENT
• [PATCH v2 6/8] arm: mach-mvebu: add defconfig   Gregory CLEMENT
• [PATCH v2 7/8] arm: mach-mvebu: add entry to MAINTAINERS   Gregory CLEMENT
• [PATCH v2 8/8] ARM: mvebu: MPIC: read number of interrupts from control register   Gregory CLEMENT
• [PATCHv2 11/12] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Paul Walmsley
• [PATCH v2 1/8] arm: mach-mvebu: add header   Andrew Lunn
• [PATCH 2/6] ARM: OMAP AM33xx: voltagedomain: Add voltage domain data   Vaibhav Hiremath
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Nicolas Pitre
• [PATCH] net: lpc_eth: fix tx completion   Eric Dumazet
• [PATCH 1/2] ARM: OMAP2+: hwmod data: Fix the wrong clkdm assigned to PRCM modules   Paul Walmsley
• [PATCH] ARM: Fix dts files w/ status property: "disable" -> "disabled"   Stephen Warren
• [PATCH 2/2] Revert "ARM: OMAP2+: clockdomains: make {prm, cm}_clkdm common"   Paul Walmsley
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Will Deacon
• [PATCHv10 00/11] I2C fixes   Shubhrajyoti
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Stephen Boyd
• Overriding/concatenating kernel command-line with bootargs from dtb?   Florian Fainelli
• [PATCH v3 0/9] Add clk_prepare/clk_unprepare   Stephen Warren
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Russell King - ARM Linux
• [PATCH] ARM: dt: tegra seaboard: move battery monitor to mux'd I2C bus.   Stephen Warren
• [PATCH] ARM: tegra: enable I2C mux in defconfig   Stephen Warren
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Jon Hunter
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Nicolas Pitre
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Russell King - ARM Linux
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Jon Hunter
• [PATCH] net: lpc_eth: fix tx completion   Roland Stigge
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Jon Hunter
• [PATCH] ARM: Fix dts files w/ status property: "disable" -> "disabled"   Roland Stigge
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Wolfram Sang
• [PATCH] ARM: omap: Fix dts files w/ status property: "disable" -> "disabled"   Roland Stigge
• [PATCH] ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled"   Roland Stigge
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Nicolas Pitre
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Eric Dumazet
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Russell King - ARM Linux
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Russell King - ARM Linux
• [PATCH RESEND] ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused   Roland Stigge
• [PATCH RESEND v4] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH v7] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Nicolas Pitre
• [PATCH RESEND 1/2] serial/8250: Add LPC3220 standard UART type   Roland Stigge
• [PATCH RESEND 2/2] serial/of-serial: Add LPC3220 standard UART compatible string   Roland Stigge
• [PATCH RESEND v2] serial: Add driver for LPC32xx High Speed UARTs   Roland Stigge
• [PATCH] ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled"   Stephen Warren
• [PATCH] net: lpc_eth: fix tx completion   David Miller
• [PATCHv2 11/12] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Cousson, Benoit
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Jon Hunter
• [PATCH] arm: versatile: fix and enable PCI I/O space   Robert Schwebel
• RFC: changing DMA slave configuration API   David Brown
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH] ARM: two possible fixes for the KALLSYMS build problem   David Brown
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Jon Hunter
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   David Marlin
• [rtc-linux] Re: [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Linus Walleij
• [PATCH 03/14] mfd: ab8500-gpadc: Enable IRQF_ONESHOT when requesting a threaded IRQ   Linus Walleij
• [rtc-linux] [PATCH 02/14] rtc: Ensure correct probing of the AB8500 RTC when Device Tree is enabled   Linus Walleij
• [PATCH V3 0/3] i2c-nomadik changes   Alessandro Rubini
• [PATCH V3 1/3] i2c-nomadik: move header to <linux/platform_data/i2c-nomadik.h>   Alessandro Rubini
• [PATCH V3 2/3] i2c-nomadik: turn the platform driver to an amba driver   Alessandro Rubini
• [PATCH V3 3/3] i2c-nomadik: depend on ARM_AMBA, not PLAT_NOMADIK   Alessandro Rubini
• [PATCH v5 05/14] ARM: OMAP2+: gpmc: resource creation helpers   Jon Hunter
• [PATCH 04/14] mfd: Remove redundant Kconfig entry   Linus Walleij
• [PATCH 05/14] mfd: Enable DT probing of the DB8500 PRCMU   Linus Walleij
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Linus Walleij
• [PATCH 07/14] mfd: Initialise the AB8500 driver at core_initcall time   Linus Walleij
• [PATCH v2 05/10] ARM: tegra: Rewrite PCIe support as a driver   Stephen Warren
• [PATCH 1/2] ARM: OMAP2+: hwmod data: Fix the wrong clkdm assigned to PRCM modules   Cousson, Benoit
• [PATCH v2 06/10] ARM: tegra: pcie: Add MSI support   Stephen Warren
• [PATCH v2 05/10] ARM: tegra: Rewrite PCIe support as a driver   Stephen Warren
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Linus Walleij
• [PATCH v2 08/10] ARM: tegra: harmony: Initialize regulators from DT   Stephen Warren
• [PATCH V3 0/3] i2c-nomadik changes   Linus Walleij
• [PATCH 11/14] usb: otg: Enable probing of the ab8500 during a Device Tree boot   Linus Walleij
• [PATCH 12/14] ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree   Linus Walleij
• [PATCH v2 09/10] ARM: tegra: harmony: Initialize PCIe from DT   Stephen Warren
• [PATCH 13/14] ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices   Linus Walleij
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Jon Hunter
• [PATCH 14/14] ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled   Linus Walleij
• [PATCH] arm: ep93xx: Enable i2c support for ep9302   Ryan Mallon
• [PATCH 1/14] ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts   Alexandre Pereira da Silva
• [PATCH 3/14] ARM: LPC32xx: Remove SLC controller initialization from platform init   Alexandre Pereira da Silva
• [PATCH 5/14] ARM: LPC32xx: Adjust dtsi file for MLC controller configuration   Alexandre Pereira da Silva
• [PATCH 6/14] ARM: LPC32xx: Add dts for EA3250 reference board   Alexandre Pereira da Silva
• [PATCH 7/14] ARM: LPC32xx: DTS adjustment for key matrix controller   Alexandre Pereira da Silva
• [PATCH 9/14] ARM: LPC32xx: Defconfig update   Alexandre Pereira da Silva
• [PATCH 10/14] ARM: LPC32xx: Add MMC controller support   Alexandre Pereira da Silva
• [PATCH 12/14] ARM: LPC32xx: DT conversion of Standard UARTs   Alexandre Pereira da Silva
• [PATCH 14/14] ARM: LPC32xx: Remove mach specific ARCH_NR_GPIOS, use default   Alexandre Pereira da Silva
• [PATCH 13/14] ARM: LPC32xx: High Speed UART configuration via DT   Alexandre Pereira da Silva
• [PATCH v5 08/14] ARM: OMAP2+: gpmc: bool type timing helper   Jon Hunter
• [PATCH v5 09/14] ARM: OMAP2+: gpmc: holler if no configuration   Jon Hunter
• [PATCH] ARM: omap: Fix dts files w/ status property: "disable" -> "disabled"   Cousson, Benoit
• [PATCH] ARM: dt: tegra: rename board files to match SoC   Stephen Warren
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Jon Hunter
• [PATCH v5 12/14] ARM: OMAP2+: gpmc: cs reconfigure helper   Jon Hunter
• [GIT PULL] imx fixes for v3.5-rc (part 2)   Shawn Guo
• [PATCH 1/5] ARM: OMAP3EVM: Add NAND flash definition   Zumeng Chen
• [PATCH 4/5] MFD: OMAP3EVM: USB: cosmetic fix to failed parent clk set   Zumeng Chen
• [PATCH 0/5] OMAP3530evm misc fixes for linux-omap   Zumeng Chen
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Nicolas Pitre
• [RFC PATCH 2/2] ARM: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs   Nicolas Pitre
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   T Makphaibulchoke
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH][RFC] mm: Don't put CMA pages on per-cpu lists   Laura Abbott
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Paul Mundt
• [PATCH v2 05/10] ARM: tegra: Rewrite PCIe support as a driver   Thierry Reding
• [PATCH v2 06/10] ARM: tegra: pcie: Add MSI support   Thierry Reding
• [PATCH RESEND v4] input: keyboard: Add keys driver for the LPC32xx SoC   Shubhrajyoti
• [PATCH v2 06/10] ARM: tegra: pcie: Add MSI support   Stephen Warren
• [PATCH v2 06/10] ARM: tegra: pcie: Add MSI support   Thierry Reding
• [PATCH v2 09/10] ARM: tegra: harmony: Initialize PCIe from DT   Thierry Reding
• [PATCH 1/3] ARM: OMAP2+: nand: unify init functions   Mohammed, Afzal
• RFC: changing DMA slave configuration API   Vinod Koul
• RFC: changing DMA slave configuration API   Vinod Koul
• [PATCH v2 06/10] ARM: tegra: pcie: Add MSI support   Thierry Reding
• [PATCH v2 08/10] ARM: tegra: harmony: Initialize regulators from DT   Thierry Reding
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Mohammed, Afzal
• [PATCH] MXS: Add DENX M28 dts file   Huang Shijie
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• am33xx: pin modes   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCH v2 05/10] ARM: tegra: Rewrite PCIe support as a driver   Thierry Reding
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Tony Lindgren
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v7 04/12] ARM: SoC: convert OMAP4 to SoC descriptor   Tony Lindgren
• [PATCH] ARM: kprobes: run t32_simulate_ldr_literal() without insn slot   Tixy
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Mohammed, Afzal
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [PATCH V2 1/2] arm/dts: OMAP2: Add support for OMAP2420 SDP   Tony Lindgren
• [PATCH 01/16] Input: Add Device Tree support to the ab8500-ponkey driver   Dmitry Torokhov
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH v2 05/10] ARM: tegra: Rewrite PCIe support as a driver   Thierry Reding
• [PATCH v2] ARM: EXYNOS: Add smc call to support trustzone feature   Kyungmin Park
• [PATCH v3 5/9] Input: tegra-kbc - add clk_prepare/clk_unprepare   Dmitry Torokhov
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Gregory CLEMENT
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Igor Grinberg
• [PATCH 4/5] MFD: OMAP3EVM: USB: cosmetic fix to failed parent clk set   Igor Grinberg
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Lee Jones
• [PATCH 14/14] ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled   Lee Jones
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Andrew Lunn
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Arnd Bergmann
• [PATCH v3 9/9] crypto: add clk_prepare/clk_unprepare   Herbert Xu
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Lee Jones
• [PATCH 07/14] mfd: Initialise the AB8500 driver at core_initcall time   Lee Jones
• [PATCH v5 05/14] ARM: OMAP2+: gpmc: resource creation helpers   Mohammed, Afzal
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Lee Jones
• [PATCH 07/14] mfd: Initialise the AB8500 driver at core_initcall time   Lee Jones
• [PATCH v2 3/8] arm: mach-mvebu: add compilation/configuration change   Arnd Bergmann
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Mohammed, Afzal
• [PATCH v5 08/14] ARM: OMAP2+: gpmc: bool type timing helper   Mohammed, Afzal
• [PATCH v5 09/14] ARM: OMAP2+: gpmc: holler if no configuration   Mohammed, Afzal
• [PATCH] dmaengine: at_hdmac: trivial: fix comment in header   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: trivial: fix comment in header   Nicolas Ferre
• [PATCH v2 2/8] arm: mach-mvebu: add source files   Arnd Bergmann
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Wolfram Sang
• [PATCH 1/2] ARM: vexpress: Check master site in daughterboard's sysctl operations   Jon Medhurst (Tixy)
• [PATCH 03/14] mfd: ab8500-gpadc: Enable IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Mohammed, Afzal
• [PATCH v5 12/14] ARM: OMAP2+: gpmc: cs reconfigure helper   Mohammed, Afzal
• [PATCH 1/2] ARM: vexpress: Check master site in daughterboard's sysctl operations   Pawel Moll
• [PATCH] dmaengine: at_hdmac: trivial: fix comment in header   Vinod Koul
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Will Deacon
• [PATCH] ARM: remove linkup-l1110.h   Paul Bolle
• [PATCH v2] ARM: OMAP2/3: hwmod data: add gpmc   Mohammed, Afzal
• [PATCH 0/3] Prepare for GPMC driver conversion   Mohammed, Afzal
• [PATCH] ARM: remove old SA-1111.h   Paul Bolle
• [PATCH v7 00/12] Per SoC descriptor   Marc Zyngier
• [PATCH v5 00/14] GPMC driver conversion   Mohammed, Afzal
• [RFC PATCH 0/3] usb: musb: add new phy driver   Felipe Balbi
• [RFC PATCH] MTD: nand: add return value for write_page() function in structure of nand_ecc_ctrl.   Artem Bityutskiy
• [PATCH] pinctrl: nomadik: fix up typo   Linus Walleij
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   viresh kumar
• [PATCH 1/1] pinctrl: pinctrl-imx: fix incorrect debug message of maps   Linus Walleij
• [RFC PATCH] MTD: nand: add return value for write_page() function in structure of nand_ecc_ctrl.   Josh Wu
• [PATCH] pinctrl: nomadik: fix up typo   Lee Jones
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   Fengguang Wu
• [PATCH] MXS: Add DENX M28 dts file   Marek Vasut
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   viresh kumar
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Linus Walleij
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Linus Walleij
• [PATCH] ARM: remove linkup-l1110.h   Dmitry Artamonow
• [RFC 0/4] ARM: topology: set the capacity of each cores for big.LITTLE   Vincent Guittot
• [RFC 1/4] ARM: topology: Add arch_scale_freq_power function   Vincent Guittot
• [RFC 2/4] ARM: topology: factorize the update of sibling masks   Vincent Guittot
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Vincent Guittot
• [RFC 4/4] sched: cpu_power: enable ARCH_POWER   Vincent Guittot
• [PATCH] PINCTRL: SiRF: add CSR SiRFprimaII GPIO driver depending on pinmux APIs   Barry Song
• [PATCH 5/9] ARM: kirkwood: use devicetree for orion-spi   Andrew Lunn
• [PATCH] kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6   Rabin Vincent
• [PATCH v8 00/13] Per sub-architecture SMP operations   Marc Zyngier
• [PATCH v8 01/13] ARM: Add per-platform SMP/CPU-hotplug operations   Marc Zyngier
• [PATCH v8 02/13] ARM: convert VExpress/RealView to smp_ops   Marc Zyngier
• [PATCH v8 03/13] ARM: convert OMAP4 to smp_ops   Marc Zyngier
• [PATCH v8 04/13] ARM: convert Tegra to smp_ops   Marc Zyngier
• [PATCH v8 05/13] ARM: convert Exynos to smp_ops   Marc Zyngier
• [PATCH v8 06/13] ARM: convert MSM SMP to smp_ops   Marc Zyngier
• [PATCH v8 07/13] ARM: convert ux500 to smp_ops   Marc Zyngier
• [PATCH v8 08/13] ARM: convert shmobile SMP to smp_ops   Marc Zyngier
• [PATCH v8 09/13] ARM: convert highbank to smp_ops   Marc Zyngier
• [PATCH v8 10/13] ARM: convert imx6q to smp_ops   Marc Zyngier
• [PATCH v8 11/13] ARM: convert spear13xx to smp_ops   Marc Zyngier
• [PATCH v8 12/13] ARM: smp: Make smp_ops mandatory for SMP platforms   Marc Zyngier
• [PATCH v8 13/13] ARM: consolidate pen_release instead of having per platform definitions   Marc Zyngier
• [PATCH 1/2] ARM: OMAP2+: hwmod data: Fix the wrong clkdm assigned to PRCM modules   Cousson, Benoit
• [PATCH] ARM: pxa: remove eseries.h   Paul Bolle
• [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.   Ravi Kumar V
• [PATCH v2 2/8] arm: mach-mvebu: add source files   Gregory CLEMENT
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Mohammed, Afzal
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Arnd Bergmann
• [PATCH v2 3/8] arm: mach-mvebu: add compilation/configuration change   Gregory CLEMENT
• [PATCH 1/2] ARM: vexpress: Check master site in daughterboard's sysctl operations   Jon Medhurst (Tixy)
• [PATCH v2 4/8] arm: mach-mvebu: add support for Armada 370 and Armada XP with DT   Arnd Bergmann
• [PATCH v8 11/13] ARM: convert spear13xx to smp_ops   viresh kumar
• [PATCH] ARM: pxa: remove eseries.h   Eric Miao
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Lee Jones
• [PATCH v2 2/8] arm: mach-mvebu: add source files   Arnd Bergmann
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Arnd Bergmann
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Gregory CLEMENT
• [PATCH] mach-dove: Fixup ge00 initialisation   Hannes Reinecke
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Andrew Lunn
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   Russell King - ARM Linux
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   viresh kumar
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Jason Cooper
• [PATCH 14/14] ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled   Linus Walleij
• [PATCH] ARM: two possible fixes for the KALLSYMS build problem   Russell King - ARM Linux
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Russell King - ARM Linux
• [PATCH v3 0/4] DT clock bindings   Rob Herring
• [PATCH v3 1/4] clk: add DT clock binding support   Rob Herring
• [PATCH v3 2/4] clk: add DT fixed-clock binding support   Rob Herring
• [PATCH v3 3/4] dt: add clock binding doc to primecell bindings   Rob Herring
• [PATCH v3 4/4] clk: add highbank clock support   Rob Herring
• [PATCH 14/14] ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled   Lee Jones
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Arnd Bergmann
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Arnd Bergmann
• [PATCHv3 00/20] ARM: OMAP4: device off support   Tero Kristo
• [PATCHv3 01/20] ARM: OMAP4: PM: powerdomain: Add HWSAR flag to L3INIT   Tero Kristo
• [PATCHv3 02/20] ARM: OMAP4: powerdomain: update mpu / core off counters during device off   Tero Kristo
• [PATCHv3 03/20] ARM: OMAP4: PM: add support for device off   Tero Kristo
• [PATCHv3 04/20] ARM: OMAP4: PM: update ROM return address for OSWR and OFF   Tero Kristo
• [PATCHv3 05/20] OMAP4: PM: clockdomain: workaround for l4_secure_clkdm HWSUP   Tero Kristo
• [PATCHv3 06/20] ARM: OMAP4: secure: move GIC / wakeupgen save restore to secure CPU PM notifier   Tero Kristo
• [PATCHv3 07/20] ARM: OMAP4: secure: add support for device off   Tero Kristo
• [PATCHv3 08/20] ARM: OMAP4: PM: add MPUSS power domain device off support   Tero Kristo
• [PATCHv3 09/20] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode   Tero Kristo
• [PATCHv3 10/20] ARM: OMAP4: PM: save/restore all CM1/2 settings in OFF mode   Tero Kristo
• [PATCHv3 11/20] ARM: OMAP4: PM: Add SAR backup support towards device OFF   Tero Kristo
• [PATCHv3 12/20] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA   Tero Kristo
• [PATCHv3 13/20] ARM: OMAP4: PM: save/restore CM L3INSTR registers when MPU hits OSWR/OFF mode   Tero Kristo
• [PATCHv3 14/20] ARM: OMAP4: PM: Mark the PPI and SPI interrupts as non-secure for GP   Tero Kristo
• [PATCHv3 15/20] ARM: OMAP4430: PM: workaround for DDR corruption on second CS   Tero Kristo
• [PATCHv3 16/20] TEMP: ARM: OMAP4: prevent voltage transitions   Tero Kristo
• [PATCHv3 17/20] ARM: OMAP4: put cpu1 back to sleep if no wake request   Tero Kristo
• [PATCHv3 18/20] ARM: OMAP4460: wakeupgen: set GIC_CPU0 backup status flag always   Tero Kristo
• [PATCHv3 19/20] ARM: OMAP4: PM: enable off mode by default   Tero Kristo
• [PATCH v2 09/10] ARM: tegra: harmony: Initialize PCIe from DT   Stephen Warren
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Lee Jones
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Jason Cooper
• [PATCH v2 06/10] ARM: tegra: pcie: Add MSI support   Stephen Warren
• [PATCHv3 20/20] ARM: OMAP4430: PM: errata i625, WUGEN lost for GP devices after OFF mode   Tero Kristo
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH v3 0/4] DT clock bindings   Mike Turquette
• [PATCH v2 2/8] arm: mach-mvebu: add source files   Nicolas Pitre
• [PATCH v2 05/10] ARM: tegra: Rewrite PCIe support as a driver   Stephen Warren
• [PATCH] ARM: two possible fixes for the KALLSYMS build problem   David Brown
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Lasse Collin
• [PATCH v3 0/4] DT clock bindings   Rob Herring
• [PATCH 4/5] MFD: OMAP3EVM: USB: cosmetic fix to failed parent clk set   Jon Hunter
• [PATCH V2 1/2] arm/dts: OMAP2: Add support for OMAP2420 SDP   Jon Hunter
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH 1/2] clockevents: add an optional frequency update function   Linus Walleij
• [PATCH 4/5] MFD: OMAP3EVM: USB: cosmetic fix to failed parent clk set   Zumeng Chen
• [PATCH 2/5] ARM: at91: Implementation of PMC clks using the common clk framework.   Mike Turquette
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   Kevin Hilman
• [PATCH] clk: wm831x: Add initial WM831x clock driver   Mike Turquette
• [PATCH] clk: Constify struct clk_init_data   Mike Turquette
• [PATCH] watchdog: coh901327_wdt: use clk_prepare/unprepare   Linus Walleij
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 1/2] clockevents: add an optional frequency update function   Thomas Gleixner
• [PATCH v2 06/10] ARM: tegra: pcie: Add MSI support   Thierry Reding
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Nicolas Pitre
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Jon Hunter
• [PATCH v5 1/7] ARM: davinci, cp_intc: Add irq domain support   Sekhar Nori
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Jon Hunter
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Arnd Bergmann
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Joe Perches
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Nicolas Pitre
• [PATCH] ARM: imx: cleanup otg_mode   Benoît Thébaudeau
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Jon Hunter
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Jon Hunter
• [PATCH v5 05/14] ARM: OMAP2+: gpmc: resource creation helpers   Jon Hunter
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Jon Hunter
• [PATCH 4/7] ARM: nomadik: convert to generic clock   Mike Turquette
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Jon Hunter
• [PATCH v5 09/14] ARM: OMAP2+: gpmc: holler if no configuration   Jon Hunter
• [PATCH 5/9] ARM: kirkwood: use devicetree for orion-spi   Jason Cooper
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Jon Hunter
• [PATCH] ARM: two possible fixes for the KALLSYMS build problem   Russell King - ARM Linux
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Jon Hunter
• [PATCH v5 14/14] ARM: OMAP2+: gpmc: writeprotect helper   Jon Hunter
• ARM: iMX: lockup with irqs disabled in drivers/tty/imx.c   Fabio Estevam
• [PATCH] serial/amba-pl011: move custom pin control to driver   Linus Walleij
• [PATCH v5 07/14] ARM: OMAP2+: gpmc: time setting (register#) helper   Jon Hunter
• [PATCH v5 01/14] ARM: OMAP2+: gpmc: platform definitions   Jon Hunter
• [PATCH 1/2] clk: cache parent clocks only for muxes   Mike Turquette
• [PATCH 2/2] clk: Allow late cache allocation for clk->parents   Mike Turquette
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• Detecting support for trapping floating-point exceptions on ARM   Joseph S. Myers
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Jon Hunter
• [PATCH v8] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH v2] usb: fsl_udc: errata - postpone freeing current dTD   Christoph Fritz
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Thavatchai Makphaibulcboke
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [RFC/PATCH v5 0/7] ARM11 MPCore: preemption/task migration cache coherency fixups   gdavis at mvista.com
• [RFC/PATCH v5 1/7] ARM: ARM11 MPCore: Make pgd_alloc preempt safe   gdavis at mvista.com
• [RFC/PATCH v5 2/7] ARM: ARM11 MPCore: Make pte_alloc_one{, _kernel} preempt safe   gdavis at mvista.com
• [RFC/PATCH v5 3/7] ARM: ARM11 MPCore: Make {clean, flush}_pmd_entry preempt safe   gdavis at mvista.com
• [RFC/PATCH v5 4/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   gdavis at mvista.com
• [RFC/PATCH v5 5/7] ARM: ARM11 MPCore: cpu_v6_dcache_clean_area needs RFO   gdavis at mvista.com
• [RFC/PATCH v5 6/7] ARM: ARM11 MPCore: Make DMA_CACHE_RWFO operations preempt safe   gdavis at mvista.com
• [RFC/PATCH v5 7/7] ARM: ARM11 MPCore: Make cpu_v6_set_pte_ext preempt safe   gdavis at mvista.com
• [PATCH] ARM: mxc-rnga: fix data_present API   Benoît Thébaudeau
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [PATCH] ARM: mxc-rnga: fix data_present API   Fabio Estevam
• [PATCH v2 0/4] syscall_trace fixes and cleanups   Will Deacon
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Jon Hunter
• [RFC PATCH 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Will Deacon
• [PATCH] ARM: mxc-rnga: fix data_present API   Benoît Thébaudeau
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Will Deacon
• [PATCH] clk: Check parent for NULL in clk_change_rate   Mike Turquette
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Jon Hunter
• [PATCH 2/3] clk: add ICST307 driver   Mike Turquette
• problems with external initramfs passed to device tree kernel   John Linn
• [PATCH v4] usb: chipidea: permit driver bindings pass phy pointer   Greg KH
• [PATCH V3 0/2] arm/dts: Add OMAP2420 SDP support   Jon Hunter
• [PATCH V3 1/2] arm/dts: OMAP2: Add support for OMAP2420H4 Board   Jon Hunter
• [PATCH V3 2/2] arm/dts: OMAP2: Fix interrupt controller binding   Jon Hunter
• [PATCH V3 0/2] arm/dts: Add OMAP2420 SDP support   Jon Hunter
• [PATCH V2] clk: give clock chance to change parent at setrate stage   Mike Turquette
• [PATCH V3 0/2] arm/dts: Add OMAP2420 SDP support   Jon Hunter
• [RESEND PATCH V3 0/2] arm/dts: Add OMAP2420 H4 support   Jon Hunter
• [RESEND PATCH V3 1/2] arm/dts: OMAP2: Add support for OMAP2420H4 Board   Jon Hunter
• [RESEND PATCH V3 2/2] arm/dts: OMAP2: Fix interrupt controller binding   Jon Hunter
• mx51evk kernel dump on next-20120612   Fabio Estevam
• [PATCH v2] usb: fsl_udc: errata - postpone freeing current dTD   Fabio Estevam
• mx51evk kernel dump on next-20120612   Fabio Estevam
• MXS getting AUART to work with DT.   Subodh Nijsure
• [PATCH v2 0/5] ARM OMAP3530evm misc fixes for linux-omap   Zumeng Chen
• [PATCH V2 1/5] ARM: OMAP3EVM: Add NAND flash definition   Zumeng Chen
• [PATCH V2 2/5] ARM: OMAP3EVM: Adding USB internal LDOs board file   Zumeng Chen
• [PATCH V2 3/5] ARM: omap3evm: enable VBUS switch for EHCI tranceiver   Zumeng Chen
• [PATCH V2 4/5] ARM: OMAP3EVM: cosmetic fixes for parent clk set   Zumeng Chen
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH 1/2] clk: cache parent clocks only for muxes   Rajendra Nayak
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Mohammed, Afzal
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Mohammed, Afzal
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   S, Venkatraman
• [PATCH v5 05/14] ARM: OMAP2+: gpmc: resource creation helpers   Mohammed, Afzal
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Mohammed, Afzal
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Mohammed, Afzal
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [RFC PATCH v2] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Josh Wu
• [PATCH V2 03/10] ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS   Pandita, Vikram
• [PATCH v5 14/14] ARM: OMAP2+: gpmc: writeprotect helper   Mohammed, Afzal
• [PATCH V2 03/10] ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS   Pandita, Vikram
• [PATCH v5 07/14] ARM: OMAP2+: gpmc: time setting (register#) helper   Mohammed, Afzal
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Eric Dumazet
• [PATCH V2 03/10] ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS   Shilimkar, Santosh
• [PATCH v4] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v5 01/14] ARM: OMAP2+: gpmc: platform definitions   Mohammed, Afzal
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH] ARM: mxc-rnga: fix data_present API   Uwe Kleine-König
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH] ARM: imx: cleanup otg_mode   Sascha Hauer
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [PATCH] kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6   Tixy
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Mohammed, Afzal
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Mohammed, Afzal
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Igor Grinberg
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH V2 1/5] ARM: OMAP3EVM: Add NAND flash definition   Igor Grinberg
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH v2 05/10] ARM: tegra: Rewrite PCIe support as a driver   Thierry Reding
• [PATCH V2 2/5] ARM: OMAP3EVM: Adding USB internal LDOs board file   Igor Grinberg
• [PATCH V2 1/5] ARM: OMAP3EVM: Add NAND flash definition   Zumeng Chen
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH V2 2/5] ARM: OMAP3EVM: Adding USB internal LDOs board file   Zumeng Chen
• [PATCH] ARM: gic: add irq_set_affinity to gic_arch_extn   Chao Xie
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [PATCH 2/3] clk: add ICST307 driver   Linus Walleij
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [RFC PATCH v4] ARM: imx: Add basic imx6q thermal management   Dirk Behme
• [RFC 1/4] ARM: topology: Add arch_scale_freq_power function   Jean Pihet
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Jean Pihet
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH 0/3 V0] add 88pm80x mfd driver   Qiao Zhou
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Qiao Zhou
• [PATCH 2/3] rtc: add rtc support to 88PM80X PMIC   Qiao Zhou
• [PATCH 3/3] input: add onkey support to 88PM80X PMIC   Qiao Zhou
• [PATCH V2 00/22] watchdog: ARM watchdogs: sp805 & mpcore updates & fixes   viresh kumar
• [RFC 1/4] ARM: topology: Add arch_scale_freq_power function   Vincent Guittot
• [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()   Roland Stigge
• [RFC/PATCH v5 5/7] ARM: ARM11 MPCore: cpu_v6_dcache_clean_area needs RFO   Catalin Marinas
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Martin Schwidefsky
• [RFC/PATCH v5 7/7] ARM: ARM11 MPCore: Make cpu_v6_set_pte_ext preempt safe   Catalin Marinas
• [RFC/PATCH v5 5/7] ARM: ARM11 MPCore: cpu_v6_dcache_clean_area needs RFO   Russell King - ARM Linux
• [RFC/PATCH v5 5/7] ARM: ARM11 MPCore: cpu_v6_dcache_clean_area needs RFO   Catalin Marinas
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Vincent Guittot
• [RFC/PATCH v5 5/7] ARM: ARM11 MPCore: cpu_v6_dcache_clean_area needs RFO   Russell King - ARM Linux
• [PATCH v5 1/7] ARM: davinci, cp_intc: Add irq domain support   Heiko Schocher
• [RFC/PATCH v5 5/7] ARM: ARM11 MPCore: cpu_v6_dcache_clean_area needs RFO   Catalin Marinas
• [PATCH net-next] net: lpc_eth: free skbs in start_xmit   Eric Dumazet
• [PATCH 2/2] ARM: vexpress: Initial common clock support   Jon Medhurst (Tixy)
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Igor Grinberg
• [PATCH 0/2] Few MUSB fixes for ifdef removal   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Fix MUSB ifdefs for platform init code   Tony Lindgren
• [PATCH 2/2] ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0   Tony Lindgren
• [PATCH] mach-dove: Fixup ge00 initialisation   Andrew Lunn
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCHv3 0/3] ARM: replace custom consistent dma region with vmalloc   Marek Szyprowski
• [PATCHv3 1/3] mm: vmalloc: use const void * for caller argument   Marek Szyprowski
• [PATCHv3 2/3] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   Marek Szyprowski
• [PATCHv3 3/3] ARM: dma-mapping: remove custom consistent dma region   Marek Szyprowski
• [RFC/PATCH v5 5/7] ARM: ARM11 MPCore: cpu_v6_dcache_clean_area needs RFO   George G. Davis
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH 0/3] Prepare for GPMC driver conversion   Tony Lindgren
• [RFC/PATCH v5 7/7] ARM: ARM11 MPCore: Make cpu_v6_set_pte_ext preempt safe   George G. Davis
• [RFC/PATCH v5 5/7] ARM: ARM11 MPCore: cpu_v6_dcache_clean_area needs RFO   George G. Davis
• Fwd: [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Srinidhi Kasagar
• [PATCHv2 0/6] ARM: DMA-mapping: new extensions for buffer sharing   Marek Szyprowski
• [PATCHv2 1/6] common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute   Marek Szyprowski
• [PATCHv2 2/6] ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute   Marek Szyprowski
• [PATCHv2 3/6] common: dma-mapping: introduce dma_get_sgtable() function   Marek Szyprowski
• [PATCHv2 4/6] ARM: dma-mapping: add support for dma_get_sgtable()   Marek Szyprowski
• [PATCHv2 5/6] common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute   Marek Szyprowski
• [PATCHv2 6/6] ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute   Marek Szyprowski
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH v2] RFC: spi/sa1100: rewrite the SA1100 SPI driver   Linus Walleij
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Tony Lindgren
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Tony Lindgren
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Tony Lindgren
• [PATCH] ARM: dma-mapping: fix debug messages in dmabounce code   Marek Szyprowski
• [PATCH v2 0/5] mmp audio support   Mark Brown
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Mohammed, Afzal
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Hiremath, Vaibhav
• [PATCH 4/9] ARM: OMAP2+: gpmc-tusb6010: Adapt to use gpmc driver   Tony Lindgren
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 5/9] ARM: OMAP2+: gpmc-smc91x: Adapt to use gpmc driver   Tony Lindgren
• [PATCH v5 00/14] GPMC driver conversion   Tony Lindgren
• [Patch v5 00/13] add imx usb driver for mx28/6x   Richard Zhao
• [Patch v5 01/13] usb: otg: add notify_connect/notify_disconnect callback   Richard Zhao
• [Patch v5 02/13] USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phy   Richard Zhao
• [Patch v5 03/13] USB: notify phy when root hub port connect change   Richard Zhao
• [Patch v5 04/13] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [Patch v5 05/13] usb: otg: add basic mxs phy driver support   Richard Zhao
• [Patch v5 06/13] usb: chipidea: add imx platform driver   Richard Zhao
• [Patch v5 07/13] ARM: imx6q: correct device name of usbphy and usb controller clock export   Richard Zhao
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Richard Zhao
• [Patch v5 09/13] ARM: imx6q: add usbphy clocks   Richard Zhao
• [Patch v5 10/13] ARM: imx6q: disable usb charger detector   Richard Zhao
• [Patch v5 11/13] ARM: dts: imx6q-sabrelite: add usb devices   Richard Zhao
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [Patch v5 12/13] ARM: mxs: clk_register_clkdev mx28 usb clocks   Richard Zhao
• [Patch v5 13/13] ARM: dts: imx28-evk: add usb devices   Richard Zhao
• [PATCH 0/3] Prepare for GPMC driver conversion   Mohammed, Afzal
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Amit Kucheria
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Peter Zijlstra
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Jean Pihet
• [RFC 4/4] sched: cpu_power: enable ARCH_POWER   Peter Zijlstra
• [PATCH] ARM: Kirkwood: Fix clk problems modular ethernet driver   Andrew Lunn
• [RFC 1/4] ARM: topology: Add arch_scale_freq_power function   Peter Zijlstra
• [RFC 2/4] ARM: topology: factorize the update of sibling masks   Peter Zijlstra
• [PATCH 0/2] Add mt9t001 and tvp5150 support to cm-t3x board.   Dmitry Lifshitz
• [PATCH 1/2] ARM: OMAP3: cm-t35: add mt9t001 camera sensor support   Dmitry Lifshitz
• [PATCH 2/2] ARM: OMAP3: cm-t35: add tvp5150 decoder support   Dmitry Lifshitz
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Tony Lindgren
• [PATCH] ARM: irq: add a mach/fiq.h inclusion for SPARSE_IRQ build   Shawn Guo
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Peter Zijlstra
• [PATCH] ARM: irq: add a mach/fiq.h inclusion for SPARSE_IRQ build   Shawn Guo
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Peter Zijlstra
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [PATCH 4/9] ARM: OMAP2+: gpmc-tusb6010: Adapt to use gpmc driver   Mohammed, Afzal
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Peter Zijlstra
• [RFC 4/4] sched: cpu_power: enable ARCH_POWER   Vincent Guittot
• [RFC 4/4] sched: cpu_power: enable ARCH_POWER   Peter Zijlstra
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Vincent Guittot
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Peter Zijlstra
• [PATCH] ARM: irq: add a mach/fiq.h inclusion for SPARSE_IRQ build   Shawn Guo
• [PATCH 5/9] ARM: OMAP2+: gpmc-smc91x: Adapt to use gpmc driver   Mohammed, Afzal
• [PATCH] ARM: imx_v4_v5_defconfig: Allow booting from MMC card   Fabio Estevam
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Tony Lindgren
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Tony Lindgren
• [PATCH 5/9] ARM: OMAP2+: gpmc-smc91x: Adapt to use gpmc driver   Tony Lindgren
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Tony Lindgren
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Mohammed, Afzal
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [RFC 4/4] sched: cpu_power: enable ARCH_POWER   Vincent Guittot
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [PATCH] arm: tegra: build powergate unconditionally   Wolfram Sang
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [alsa-devel] [PATCH v2 0/5] mmp audio support   zhangfei gao
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCHv2 0/6] ARM: DMA-mapping: new extensions for buffer sharing   Konrad Rzeszutek Wilk
• [RFC PATCH 0/3] usb: musb: add new phy driver   ABRAHAM, KISHON VIJAY
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Vincent Guittot
• [PATCH] ARM: irq: add a mach/fiq.h inclusion for SPARSE_IRQ build   Nicolas Pitre
• [PATCH] ARM: irq: add a mach/fiq.h inclusion for SPARSE_IRQ build   Rob Herring
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Nicolas Pitre
• [PATCH 2/3] clk: add ICST307 driver   Turquette, Mike
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Vincent Guittot
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Jon Masters
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Rob Herring
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Gregory CLEMENT
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Marek Vasut
• [PATCHv3 03/20] ARM: OMAP4: PM: add support for device off   Jean Pihet
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Arnd Bergmann
• [PATCH v3 0/4] DT clock bindings   Peter De Schrijver
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Richard Zhao
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   T Krishnamoorthy, Balaji
• [PATCH v5 11/14] ARM: OMAP2+: gpmc: handle connected peripherals   Jon Hunter
• [PATCH v5 05/14] ARM: OMAP2+: gpmc: resource creation helpers   Jon Hunter
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Jon Hunter
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Jon Hunter
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Jason Cooper
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Nicolas Pitre
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Marek Vasut
• [RFC 3/4] ARM: topology: Update cpu_power according to DT information   Peter Zijlstra
• [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 2/3] ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices   Lee Jones
• [PATCH] arm: tegra: build powergate unconditionally   Stephen Warren
• [PATCH 3/3] Documentation: Device Tree binding information for i2c-nomadik driver   Lee Jones
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Arnaud Patard (Rtp)
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Thomas Petazzoni
• [PATCH] ARM: mxc-rnga: fix data_present API   Benoît Thébaudeau
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH v5 14/14] ARM: OMAP2+: gpmc: writeprotect helper   Jon Hunter
• [PATCH v2 0/5] mmp audio support   Chris Ball
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Jon Hunter
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Rob Herring
• [PATCH 0/3] Prepare for GPMC driver conversion   Jon Hunter
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Nicolas Ferre
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Rob Herring
• Fwd: [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Will Deacon
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Jon Hunter
• [PATCH 0/2] ARM: vexpress: Enable SPARSE_IRQ selection   Jon Medhurst (Tixy)
• [PATCH 1/2] ARM: vexpress: Remove IRQ defines from mach/irq.h   Jon Medhurst (Tixy)
• [PATCH 2/2] ARM: vexpress: Enable selection of SPARSE_IRQ   Jon Medhurst (Tixy)
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Marek Vasut
• [PATCHv2 04/12] ARM: OMAP4: hwmod data: fix 32k sync timer idle modes   Paul Walmsley
• [alsa-devel] [PATCH v2 0/5] mmp audio support   Mark Brown
• Where to power on the wifi device before loading the driver.   Franky Lin
• [PATCH v3 0/4] DT clock bindings   Rob Herring
• [Patch v5 02/13] USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phy   Alan Stern
• [Patch v5 03/13] USB: notify phy when root hub port connect change   Alan Stern
• Converting kirkwood-goflexnet to DTS   Josh Coombs
• [Linaro-mm-sig] [PATCHv2 5/6] common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute   Daniel Vetter
• [Linaro-mm-sig] [PATCHv2 1/6] common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute   Daniel Vetter
• [Linaro-mm-sig] [PATCHv2 3/6] common: dma-mapping: introduce dma_get_sgtable() function   Daniel Vetter
• [Linaro-mm-sig] [PATCHv2 0/6] ARM: DMA-mapping: new extensions for buffer sharing   Daniel Vetter
• Converting kirkwood-goflexnet to DTS   Jason Cooper
• [PATCH v2] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Arnd Bergmann
• [PATCH 2/2] ARM: vexpress: Enable selection of SPARSE_IRQ   Rob Herring
• [RFC 1/4] ARM: topology: Add arch_scale_freq_power function   Andy Whitcroft
• [RFC 1/4] ARM: topology: Add arch_scale_freq_power function   Joe Perches
• [PATCH] ARM: remove unused SPI clock headers   Paul Bolle
• [PATCH v2 0/5] mmp audio support   Arnd Bergmann
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH 5/9] ARM: kirkwood: use devicetree for orion-spi   Arnd Bergmann
• [PATCH] i2c: let the core register devices from devicetree   Wolfram Sang
• Where to power on the wifi device before loading the driver.   Stephen Warren
• [Patch v5 05/13] usb: otg: add basic mxs phy driver support   Sascha Hauer
• [PATCH v8 01/13] ARM: Add per-platform SMP/CPU-hotplug operations   Arnd Bergmann
• [PATCH] i2c: let the core register devices from devicetree   Benjamin Herrenschmidt
• [Patch v5 06/13] usb: chipidea: add imx platform driver   Sascha Hauer
• [RFC 1/4] ARM: topology: Add arch_scale_freq_power function   Peter Zijlstra
• [Patch v5 09/13] ARM: imx6q: add usbphy clocks   Sascha Hauer
• [Patch v5 05/13] usb: otg: add basic mxs phy driver support   Marek Vasut
• [Patch v5 06/13] usb: chipidea: add imx platform driver   Marek Vasut
• [Patch v5 05/13] usb: otg: add basic mxs phy driver support   Sascha Hauer
• [PATCH] i2c: let the core register devices from devicetree   Stephen Warren
• [Patch v5 06/13] usb: chipidea: add imx platform driver   Sascha Hauer
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   Sascha Hauer
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Andrew Morton
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH 1/2] ARM: OMAP2+: hwmod data: Fix the wrong clkdm assigned to PRCM modules   Paul Walmsley
• [PATCH 00/11] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc   Paul Walmsley
• Pogoplug E02 ARM (Kirkwood 88F6281 SoC) target vs 3.5 kernel   Jason Cooper
• [Patch v5 09/13] ARM: imx6q: add usbphy clocks   Chen Peter-B29397
• [GIT PULL] gpio/omap: cleanups for v3.5   NeilBrown
• [Patch v5 03/13] USB: notify phy when root hub port connect change   Richard Zhao
• [Patch v5 05/13] usb: otg: add basic mxs phy driver support   Richard Zhao
• [Patch v5 06/13] usb: chipidea: add imx platform driver   Richard Zhao
• MXS getting AUART to work with DT.   Fabio Estevam
• MXS getting AUART to work with DT.   Marek Vasut
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Richard Zhao
• MXS getting AUART to work with DT.   Marek Vasut
• [Patch v5 06/13] usb: chipidea: add imx platform driver   Richard Zhao
• MXS getting AUART to work with DT.   Fabio Estevam
• MXS getting AUART to work with DT.   Fabio Estevam
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• Where to power on the wifi device before loading the driver.   Wei Ni
• MXS getting AUART to work with DT.   Fabio Estevam
• [PATCH] i2c: let the core register devices from devicetree   Grant Likely
• MXS getting AUART to work with DT.   Subodh Nijsure
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jassi Brar
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• MXS getting AUART to work with DT.   Fabio Estevam
• [PATCH 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   Ming Lei
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Mohammed, Afzal
• [PATCH 0/3] Prepare for GPMC driver conversion   Mohammed, Afzal
• [PATCH 00/16] Enable SPARSE_IRQ support for imx   Shawn Guo
• [PATCH 01/16] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()   Shawn Guo
• [PATCH 02/16] ARM: imx: eliminate macro IOMUX_TO_IRQ()   Shawn Guo
• [PATCH 03/16] ARM: imx: eliminate macro IRQ_GPIOx()   Shawn Guo
• [PATCH 04/16] gpio/mxc: move irq_domain_add_legacy call into gpio driver   Shawn Guo
• [PATCH 05/16] ARM: imx: move irq_domain_add_legacy call into tzic driver   Shawn Guo
• [PATCH 06/16] ARM: imx: move irq_domain_add_legacy call into avic driver   Shawn Guo
• [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data   Shawn Guo
• [PATCH 08/16] ARM: imx: leave irq_base of wm8350_platform_data uninitialized   Shawn Guo
• [PATCH 09/16] ARM: imx: pass gpio than irq number into mxc_expio_init   Shawn Guo
• [PATCH 10/16] ARM: imx: add a legacy irqdomain for 3ds_debugboard   Shawn Guo
• [PATCH 11/16] ARM: imx: add a legacy irqdomain for mx31ads   Shawn Guo
• [PATCH 12/16] i2c: imx: remove unneeded mach/irqs.h inclusion   Shawn Guo
• [PATCH 13/16] ARM: imx: remove unneeded mach/irq.h inclusion   Shawn Guo
• [PATCH 14/16] tty: serial: imx: remove the use of MXC_INTERNAL_IRQS   Shawn Guo
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Shawn Guo
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Shawn Guo
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Hiremath, Vaibhav
• Where to power on the wifi device before loading the driver.   Thierry Reding
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH v5 03/14] ARM: OMAP2+: gpmc: driver migration helper   Tony Lindgren
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Tony Lindgren
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Igor Grinberg
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH 06/16] ARM: imx: move irq_domain_add_legacy call into avic driver   Shawn Guo
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Andrew Morton
• [PATCH 12/16] i2c: imx: remove unneeded mach/irqs.h inclusion   Wolfram Sang
• [PATCH 01/16] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()   Dong Aisheng
• [PATCH] i2c: let the core register devices from devicetree   Peter Korsgaard
• [PATCH 2/2] ARM: vexpress: Enable selection of SPARSE_IRQ   Jon Medhurst (Tixy)
• [PATCH 00/11] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc   Tero Kristo
• [PATCH 01/16] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()   Shawn Guo
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Haojian Zhuang
• [PATCH v4] usb: chipidea: permit driver bindings pass phy pointer   Alexander Shishkin
• [PATCH] i2c: let the core register devices from devicetree   viresh kumar
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Shawn Guo
• [PATCH 02/16] ARM: imx: eliminate macro IOMUX_TO_IRQ()   Dong Aisheng
• [PATCH 00/16] Enable SPARSE_IRQ support for imx   Sascha Hauer
• [PATCH 01/14] rtc: ab8500-rtc: IRQF_ONESHOT when requesting a threaded IRQ   Lee Jones
• [PATCH V3 2/3] i2c-nomadik: turn the platform driver to an amba driver   Arnd Bergmann
• [PATCH 01/16] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()   Dong Aisheng
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Igor Grinberg
• [PATCH] ARM: netx: Reuse dummy clk routines for non CONFIG_HAVE_CLK case   Viresh Kumar
• [PATCH 1/9] ARM: Kirkwood: Add interrupt controller support for DT boards   Arnd Bergmann
• [PATCH] ARM: OMAP: fix the ads7846 init code   Igor Grinberg
• [PATCH] ARM: netx: Reuse dummy clk routines for non CONFIG_HAVE_CLK case   Sascha Hauer
• [PATCH V3 2/3] i2c-nomadik: turn the platform driver to an amba driver   Alessandro Rubini
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH V3 2/3] i2c-nomadik: turn the platform driver to an amba driver   Lee Jones
• [PATCHv2 0/6] ARM: DMA-mapping: new extensions for buffer sharing   Marek Szyprowski
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Tony Lindgren
• [PATCH v5 11/14] ARM: OMAP2+: gpmc: handle connected peripherals   Mohammed, Afzal
• [PATCH v5 04/14] ARM: OMAP2+: gpmc: minimal driver support   Mohammed, Afzal
• [PATCH v5 05/14] ARM: OMAP2+: gpmc: resource creation helpers   Mohammed, Afzal
• [PATCH v5 06/14] ARM: OMAP2+: gpmc: CS configuration helper   Mohammed, Afzal
• [Linaro-mm-sig] [PATCHv2 0/6] ARM: DMA-mapping: new extensions for buffer sharing   Marek Szyprowski
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Mohammed, Afzal
• [PATCH v3 0/4] DT clock bindings   Shawn Guo
• Fwd: [RFC PATCH 00/15] ARM: perf: support multiple PMUs   Srinidhi Kasagar
• [PATCH v5 14/14] ARM: OMAP2+: gpmc: writeprotect helper   Mohammed, Afzal
• [PATCH 0/2] ARM: vexpress: Enable SPARSE_IRQ selection   Russell King - ARM Linux
• [PATCH 6/9] ARM: OMAP2+: gpmc-smsc911x: Adapt to use gpmc driver   Tony Lindgren
• [Linaro-mm-sig] [PATCHv2 1/6] common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute   Marek Szyprowski
• [PATCH 6/9] ARM: OMAP2+: gpmc-smsc911x: Adapt to use gpmc driver   Mohammed, Afzal
• [PATCH] i2c: let the core register devices from devicetree   Wolfram Sang
• [PATCHv3 03/20] ARM: OMAP4: PM: add support for device off   Tero Kristo
• [PATCH 1/9] ARM: Kirkwood: Add interrupt controller support for DT boards   Andrew Lunn
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 5/9] ARM: OMAP2+: gpmc-smc91x: Adapt to use gpmc driver   Mohammed, Afzal
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH 5/9] ARM: kirkwood: use devicetree for orion-spi   Andrew Lunn
• [PATCH v5 14/14] ARM: OMAP2+: gpmc: writeprotect helper   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCHv2 07/12] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Paul Walmsley
• How to use linear mapping without DT?   ludovic.desroches
• [PATCHv2 07/12] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup   Tony Lindgren
• [PATCH 0/6] ARM: OMAP: hwmod: remove runtime cpu_is checking   a0393909
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   Russell King - ARM Linux
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   Sascha Hauer
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH 00/17] Big OMAP I2C Cleanup   Felipe Balbi
• [PATCH 01/17] i2c: omap: simplify num_bytes handling   Felipe Balbi
• [PATCH 02/17] i2c: omap: decrease indentation level on data handling   Felipe Balbi
• [PATCH 03/17] i2c: omap: add blank lines   Felipe Balbi
• [PATCH 04/17] i2c: omap: simplify omap_i2c_ack_stat()   Felipe Balbi
• [PATCH 05/17] i2c: omap: split out [XR]DR and [XR]RDY   Felipe Balbi
• [PATCH 06/17] i2c: omap: improve 1p153 errata handling   Felipe Balbi
• [PATCH 07/17] i2c: omap: re-factor receive/transmit data loop   Felipe Balbi
• [PATCH 08/17] i2c: omap: switch over to do {} while loop   Felipe Balbi
• [PATCH 09/17] i2c: omap: ack IRQ in parts   Felipe Balbi
• [PATCH 10/17] i2c: omap: get rid of the "complete" label   Felipe Balbi
• [PATCH 11/17] i2c: omap: switch to devm_* API   Felipe Balbi
• [PATCH 12/17] i2c: omap: switch to platform_get_irq()   Felipe Balbi
• [PATCH 13/17] i2c: omap: bus: add a receiver flag   Felipe Balbi
• [PATCH 14/17] i2c: omap: simplify errata check   Felipe Balbi
• [PATCH 15/17] i2c: omap: always return IRQ_HANDLED   Felipe Balbi
• [PATCH 16/17] i2c: omap: simplify IRQ exit path   Felipe Balbi
• [PATCH 17/17] i2c: omap: resize fifos before each message   Felipe Balbi
• [linux-next] "clk: add non CONFIG_HAVE_CLK routines" commit   viresh kumar
• [PATCH v5 14/14] ARM: OMAP2+: gpmc: writeprotect helper   Mohammed, Afzal
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   Ming Lei
• [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data   Vinod Koul
• [PATCH] i2c: let the core register devices from devicetree   Pawel Moll
• [PATCH v3 0/4] dt: device tree support for TI EMIF driver for 3.6   Santosh Shilimkar
• [PATCH v3 1/4] dt: device tree bindings for LPDDR2 memories   Santosh Shilimkar
• [PATCH v3 2/4] dt: emif: device tree bindings for TI's EMIF sdram controller   Santosh Shilimkar
• [PATCH v3 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards   Santosh Shilimkar
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Santosh Shilimkar
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 01/17] i2c: omap: simplify num_bytes handling   Shilimkar, Santosh
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCH 02/17] i2c: omap: decrease indentation level on data handling   Felipe Balbi
• [PATCH 02/17] i2c: omap: decrease indentation level on data handling   Shilimkar, Santosh
• [PATCH] i2c: let the core register devices from devicetree   Jean Delvare
• [PATCH 03/17] i2c: omap: add blank lines   Shilimkar, Santosh
• [PATCH v2 1/5] dmaengine: mmp_tdma: add mmp tdma support   Vinod Koul
• [PATCH 04/17] i2c: omap: simplify omap_i2c_ack_stat()   Shilimkar, Santosh
• [PATCH 5/9] ARM: kirkwood: use devicetree for orion-spi   Arnd Bergmann
• [PATCH v2 0/4] ARM: OMAP2+: dmtimer: cleanup related to devm API and clk usage   DebBarma, Tarun Kanti
• MXS getting AUART to work with DT.   Marek Vasut
• [PATCH v2 0/4] ARM: OMAP2+: dmtimer: cleanup related to devm API and clk usage   Shilimkar, Santosh
• [PATCH 06/17] i2c: omap: improve 1p153 errata handling   Shilimkar, Santosh
• [PATCH 08/17] i2c: omap: switch over to do {} while loop   Shilimkar, Santosh
• [PATCH 08/17] i2c: omap: switch over to do {} while loop   Felipe Balbi
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH 09/17] i2c: omap: ack IRQ in parts   Shilimkar, Santosh
• [PATCH 04/17] i2c: omap: simplify omap_i2c_ack_stat()   Russell King - ARM Linux
• [PATCH 06/17] i2c: omap: improve 1p153 errata handling   Russell King - ARM Linux
• [PATCH 15/17] i2c: omap: always return IRQ_HANDLED   Shilimkar, Santosh
• [PATCH 09/17] i2c: omap: ack IRQ in parts   Russell King - ARM Linux
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH 15/17] i2c: omap: always return IRQ_HANDLED   Russell King - ARM Linux
• [PATCH 00/17] Big OMAP I2C Cleanup   Shilimkar, Santosh
• [PATCH 15/17] i2c: omap: always return IRQ_HANDLED   Shilimkar, Santosh
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCH] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Russ Dill
• [PATCH 0/2] ARM: vexpress: Enable SPARSE_IRQ selection   Jon Medhurst (Tixy)
• [PATCH] i2c: let the core register devices from devicetree   Benjamin Herrenschmidt
• [PATCH v2] ARM: vexpress: Enable SPARSE_IRQ   Jon Medhurst (Tixy)
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCH 04/17] i2c: omap: simplify omap_i2c_ack_stat()   Felipe Balbi
• [PATCH 09/17] i2c: omap: ack IRQ in parts   Felipe Balbi
• [PATCH 09/17] i2c: omap: ack IRQ in parts   Felipe Balbi
• [PATCH 06/17] i2c: omap: improve 1p153 errata handling   Felipe Balbi
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 2/5] ARM: at91: Implementation of PMC clks using the common clk framework.   Boris BREZILLON
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [CFT 07/11] spi: omap2-mcspi: add DMA engine support   Russell King - ARM Linux
• [PATCH 1/9] ARM: Kirkwood: Add interrupt controller support for DT boards   Arnd Bergmann
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCH 2/4] ARM: OMAP2+: Move the stubbed prm and cm functions to prcm.c file and make them __weak.   R, Sricharan
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [CFT 07/11] spi: omap2-mcspi: add DMA engine support   Russell King - ARM Linux
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• Where to power on the wifi device before loading the driver.   Mark Brown
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCH 0/3] ARM: OMAP2/3: Move McBSP fck alias to hwmod data   Peter Ujfalusi
• [PATCH 1/3] ARM: OMAP2: Move McBSP fck clock alias to hwmod data for OMAP2420   Peter Ujfalusi
• [PATCH 2/3] ARM: OMAP2: Move McBSP fck clock alias to hwmod data for OMAP2430   Peter Ujfalusi
• [PATCH 3/3] ARM: OMAP3: Move McBSP fck clock alias to hwmod data   Peter Ujfalusi
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Arnd Bergmann
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Rajendra Nayak
• [PATCH 01/29] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH 02/29] clk: Add CLK_IS_BASIC flag to identify basic clocks   Rajendra Nayak
• [PATCH 03/29] ARM: omap4: cm: add bitfield width values   Rajendra Nayak
• [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare   Rajendra Nayak
• [PATCH 05/29] mmc: omap_hsmmc: use clk_prepare_enable and clk_disable_unprepare   Rajendra Nayak
• [PATCH 06/29] hwrng: omap: use clk_prepare_enable and clk_disable_unprepare   Rajendra Nayak
• [PATCH 07/29] mfd: omap-usb: use clk_prepare_enable and clk_disable_unprepare   Rajendra Nayak
• [PATCH 08/29] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• [PATCH 09/29] ARM: omap: clk: Nuke plat/clock.c & reuse struct clk as clk_hw_omap   Rajendra Nayak
• [PATCH 10/29] ARM: omap: clk: Remove all direct dereferncing of struct clk   Rajendra Nayak
• [PATCH 11/29] ARM: omap: hwmod: Fix up hwmod based clkdm accesses   Rajendra Nayak
• [PATCH 12/29] ARM: omap4: clk: Convert to common clk   Rajendra Nayak
• [PATCH 13/29] ARM: omap3: clk: Convert to common clk   Rajendra Nayak
• [PATCH 14/29] ARM: omap2: clk: Convert to common clk   Rajendra Nayak
• [PATCH 15/29] ARM: omap: clk: list all clk_hw_omap clks to enable/disable autoidle   Rajendra Nayak
• [PATCH 16/29] ARM: omap: clk: Define a function to enable clocks at init   Rajendra Nayak
• [PATCH 17/29] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks   Rajendra Nayak
• [PATCH 18/29] ARM: omap4: clk: Add 44xx data using common struct clk   Rajendra Nayak
• [PATCH 19/29] ARM: omap3: clk: Add 3xxx data using common struct clk   Rajendra Nayak
• [PATCH 20/29] ARM: omap2: clk: Add 24xx data using common struct clk   Rajendra Nayak
• [PATCH 21/29] ARM: omap: clk: Switch to COMMON clk   Rajendra Nayak
• [PATCH 22/29] ARM: omap: clk: Use plat/clock.c only for OMAP1   Rajendra Nayak
• [PATCH 23/29] ARM: omap: hwmod: Cleanup !CONFIG_COMMON_CLK parts   Rajendra Nayak
• [PATCH 24/29] ARM: omap4: clk: Cleanup !CONFIG_COMMON_CLK parts   Rajendra Nayak
• [PATCH v6 00/17] Add PWM framework and device tree support   Hebbar, Gururaja
• [PATCH 25/29] ARM: omap3: clk: Cleanup !CONFIG_COMMON_CLK parts   Rajendra Nayak
• [PATCH 26/29] ARM: omap2: clk: Cleanup !CONFIG_COMMON_CLK parts   Rajendra Nayak
• [PATCH 27/29] ARM: omap4: clk: Delete old OMAP clock data   Rajendra Nayak
• [PATCH 28/29] ARM: omap3: clk: Delete old OMAP clock data   Rajendra Nayak
• [PATCH 29/29] ARM: omap2: clk: Delete old OMAP clock data   Rajendra Nayak
• [CFT 07/11] spi: omap2-mcspi: add DMA engine support   Russell King - ARM Linux
• [PATCH v6 00/17] Add PWM framework and device tree support   Thierry Reding
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCHv2 08/12] ARM: OMAP4: hwmod data: add SL2IF hardreset line   Cousson, Benoit
• [PATCH] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Igor Grinberg
• [RFC] i.MX DRM devicetree binding   Sascha Hauer
• common clock framework   Lei Wen
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• Converting kirkwood-goflexnet to DTS   Josh Coombs
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH v6 00/17] Add PWM framework and device tree support   Hebbar, Gururaja
• [PATCH, RFC] i.MX DRM support   Sascha Hauer
• [PATCH 1/5] DRM: Add i.MX drm core support   Sascha Hauer
• [PATCH 2/5] DRM i.MX: Add parallel display support   Sascha Hauer
• [PATCH 3/5] DRM i.MX: Add LCDC support   Sascha Hauer
• [PATCH 4/5] DRM: add i.MX IPUv3 base driver   Sascha Hauer
• [PATCH 5/5] DRM: Add i.MX IPUv3 crtc support   Sascha Hauer
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Russell King - ARM Linux
• [RFC PATCH 03/11] arm: omap: device: create a device for system control module   Konstantin Baydarov
• [PATCHv3 03/20] ARM: OMAP4: PM: add support for device off   Tero Kristo
• Converting kirkwood-goflexnet to DTS   Arnaud Patard (Rtp)
• Converting kirkwood-goflexnet to DTS   Jason Cooper
• [PATCH] SPI: OMAP: fix over-eager devm_xxx() conversion (was: Re: [CFT 07/11] spi: omap2-mcspi: add DMA engine support)   Russell King - ARM Linux
• [RFC] i.MX DRM devicetree binding   David Jander
• [Patch v5 03/13] USB: notify phy when root hub port connect change   Alan Stern
• Converting kirkwood-goflexnet to DTS   Andrew Lunn
• [PATCH] ARM: OMAP2+: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Hiremath, Vaibhav
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [RFC] i.MX DRM devicetree binding   Sascha Hauer
• [PATCH v4 0/8] ARM: OMAP2+: PM: introduce the power domains functional states   Jean Pihet
• [PATCH 1/8] ARM: OMAP2+: PM: protect the power domain state change by a mutex   Jean Pihet
• [PATCH 2/8] ARM: OMAP2+: PM: introduce power domains functional states   Jean Pihet
• [PATCH 3/8] ARM: OMAP2+: PM: use the functional power states API   Jean Pihet
• [PATCH 4/8] ARM: OMAP2+: PM: introduce power domains logic and memory functional states   Jean Pihet
• [PATCH 5/8] ARM: OMAP2+: PM: introduce power domains achievable functional states   Jean Pihet
• [PATCH 6/8] ARM: OMAP2+: PM: use the functional power states API for logic and memory   Jean Pihet
• [PATCH 7/8] ARM: OMAP2+: PM: use power domain functional state in stats counters   Jean Pihet
• [PATCH 8/8] ARM: OMAP2+: PM debug: trace the functional power domains states   Jean Pihet
• [PATCH] ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data   Hiremath, Vaibhav
• [PATCH v8 00/10] PM QoS: implement the OMAP low level constraints management code   Jean Pihet
• [PATCH 01/10] ARM: OMAP2+: PM QoS: control the power domains next state from the constraints   Jean Pihet
• [PATCH 02/10] ARM: OMAP2+: hwmod: manage the wake-up latency constraints   Jean Pihet
• [PATCH 03/10] ARM: OMAP2+: PM QoS: manage the per-device latency constraints in hwmod   Jean Pihet
• [PATCH 04/10] ARM: OMAP: omap_device: register to the per-device PM QoS framework   Jean Pihet
• [PATCH 05/10] ARM: OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints   Jean Pihet
• [PATCH 06/10] ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state   Jean Pihet
• [PATCH 07/10] ARM: OMAP3: update cpuidle latency and threshold figures   Jean Pihet
• [PATCH 08/10] ARM: OMAP3: powerdomain data: add wake-up latency figures   Jean Pihet
• [PATCH 09/10] ARM: OMAP: convert I2C driver to PM QoS for latency constraints   Jean Pihet
• [PATCH 10/10] ARM: OMAP: PM: remove the latency related functions from the API   Jean Pihet
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Hiremath, Vaibhav
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Guennadi Liakhovetski
• [RFC] i.MX DRM devicetree binding   David Jander
• [PATCH 14/16] tty: serial: imx: remove the use of MXC_INTERNAL_IRQS   Greg Kroah-Hartman
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Russell King - ARM Linux
• [PATCH v4] usb: chipidea: permit driver bindings pass phy pointer   Greg KH
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Greg Kroah-Hartman
• Where to power on the wifi device before loading the driver.   Stephen Warren
• [PATCH] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Russ Dill
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   H. Peter Anvin
• [PATCH v2] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Russ Dill
• [PATCH v2 00/17] Big OMAP I2C Cleanup   Felipe Balbi
• [PATCH v2 01/17] i2c: omap: simplify num_bytes handling   Felipe Balbi
• [PATCH v2 02/17] i2c: omap: decrease indentation level on data handling   Felipe Balbi
• [PATCH v2 03/17] i2c: omap: add blank lines   Felipe Balbi
• [PATCH v2 04/17] i2c: omap: simplify omap_i2c_ack_stat()   Felipe Balbi
• [PATCH v2 05/17] i2c: omap: split out [XR]DR and [XR]RDY   Felipe Balbi
• [PATCH v2 06/17] i2c: omap: improve 1p153 errata handling   Felipe Balbi
• [PATCH v2 07/17] i2c: omap: re-factor receive/transmit data loop   Felipe Balbi
• [PATCH v2 08/17] i2c: omap: switch over to do {} while loop   Felipe Balbi
• [PATCH v2 09/17] i2c: omap: ack IRQ in parts   Felipe Balbi
• [PATCH v2 10/17] i2c: omap: get rid of the "complete" label   Felipe Balbi
• [PATCH v3] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Russ Dill
• [PATCH v2 11/17] i2c: omap: switch to devm_* API   Felipe Balbi
• [PATCH v2 12/17] i2c: omap: switch to platform_get_irq()   Felipe Balbi
• [PATCH v2 13/17] i2c: omap: bus: add a receiver flag   Felipe Balbi
• [PATCH v2 14/17] i2c: omap: simplify errata check   Felipe Balbi
• [PATCH v2 15/17] i2c: omap: always return IRQ_HANDLED   Felipe Balbi
• [PATCH v2 16/17] i2c: omap: simplify IRQ exit path   Felipe Balbi
• [PATCH v2 17/17] i2c: omap: resize fifos before each message   Felipe Balbi
• Where to power on the wifi device before loading the driver.   Franky Lin
• [PATCHv2 02/12] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Cousson, Benoit
• MXS getting AUART to work with DT.   Matt Burtch
• [PATCH v2 00/23] ARM: LPC32xx specific updates for next   Roland Stigge
• [PATCH v2 01/23] ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts   Roland Stigge
• [PATCH v2 02/23] ARM: LPC32xx: Clock initialization for NAND controllers   Roland Stigge
• [PATCH v2 03/23] ARM: LPC32xx: Remove SLC controller initialization from platform init   Roland Stigge
• [PATCH v2 04/23] ARM: LPC32xx: Add DMA configuration to platform data   Roland Stigge
• [PATCH v2 05/23] ARM: LPC32xx: Adjust dtsi file for MLC controller configuration   Roland Stigge
• [PATCH v2 06/23] ARM: LPC32xx: Add dts for EA3250 reference board   Roland Stigge
• [PATCH v2 07/23] ARM: LPC32xx: DTS adjustment for key matrix controller   Roland Stigge
• [PATCH v2 08/23] ARM: LPC32xx: Clock adjustment for key matrix controller   Roland Stigge
• [PATCH v2 09/23] ARM: LPC32xx: Defconfig update   Roland Stigge
• [PATCH v2 10/23] ARM: LPC32xx: Add MMC controller support   Roland Stigge
• [PATCH v2 11/23] ARM: LPC32xx: DTS adjustment for using pl18x primecell   Roland Stigge
• [PATCH v2 12/23] ARM: LPC32xx: DT conversion of Standard UARTs   Roland Stigge
• [PATCH v2 13/23] ARM: LPC32xx: High Speed UART configuration via DT   Roland Stigge
• [PATCH v2 14/23] ARM: LPC32xx: Remove mach specific ARCH_NR_GPIOS, use default   Roland Stigge
• [PATCH v2 15/23] ARM: LPC32xx: Fix lpc32xx.dtsi status property: "disable" -> "disabled"   Roland Stigge
• [PATCH v2 16/23] ARM: LPC32xx: Build arch dtbs   Roland Stigge
• [PATCH v2 17/23] ARM: LPC32xx: Add dt settings to the at25 node   Roland Stigge
• [PATCH v2 18/23] ARM: LPC32xx: Remove spi chipselect request from board init   Roland Stigge
• [PATCH v2 19/23] ARM: LPC32xx: Remove spi chip definitions   Roland Stigge
• [PATCH v2 20/23] ARM: LPC32xx: Cleanup board init, remove duplicate clock init   Roland Stigge
• [PATCH v2 21/23] ARM: LPC32xx: Move uart6 irda disable to serial.c   Roland Stigge
• [PATCH v2 22/23] ARM: LPC32xx: Move i2s1 dma enabling to clock.c   Roland Stigge
• [PATCH v2 23/23] ARM: LPC32xx: Remove duplicate usb host clock init   Roland Stigge
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH 4/14] ARM: LPC32xx: Add DMA configuration to platform data   Roland Stigge
• [PATCHv2 08/12] ARM: OMAP4: hwmod data: add SL2IF hardreset line   Paul Walmsley
• [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH 2/3] ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices   Linus Walleij
• [PATCH 3/3] Documentation: Device Tree binding information for i2c-nomadik driver   Linus Walleij
• [PATCH V3 2/3] i2c-nomadik: turn the platform driver to an amba driver   Linus Walleij
• [PATCH] i2c: let the core register devices from devicetree   Linus Walleij
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Jon Hunter
• [GIT PULL] gpio/omap: cleanups for v3.5   DebBarma, Tarun Kanti
• [PATCH v2 00/17] Big OMAP I2C Cleanup   Wolfram Sang
• [PATCHv2 02/12] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCH v2] lib/decompress_unxz.c: removing all memory helper functions   Russell King - ARM Linux
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Mark Brown
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Mark Brown
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Mark Brown
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Mark Brown
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH v3] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Sarashetti, Mantesh
• [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare   Mike Turquette
• Follow-up to remaining issue with alignment of __log_buf in printk.c   Robert Jarzmik
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• Follow-up to remaining issue with alignment of __log_buf in printk.c   Stephen Warren
• Follow-up to remaining issue with alignment of __log_buf in printk.c   Andrew Lunn
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCHv2 02/12] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Cousson, Benoit
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [GIT PULL] gpio/omap: cleanups for v3.5   NeilBrown
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Jon Hunter
• [PATCHv2 08/12] ARM: OMAP4: hwmod data: add SL2IF hardreset line   Cousson, Benoit
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• Converting kirkwood-goflexnet to DTS   Josh Coombs
• Follow-up to remaining issue with alignment of __log_buf in printk.c   Robert Jarzmik
• [PATCHv2 08/12] ARM: OMAP4: hwmod data: add SL2IF hardreset line   Paul Walmsley
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Stephen Warren
• [PATCHv2 02/12] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Paul Walmsley
• Follow-up to remaining issue with alignment of __log_buf in printk.c   Andrew Lunn
• MXS getting AUART to work with DT.   Fabio Estevam
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   Ming Lei
• [PATCH v4] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [alsa-devel] [PATCH v2 1/5] dmaengine: mmp_tdma: add mmp tdma support   zhangfei gao
• [PATCH 1/5] dmaengine: mmp_tdma: add mmp tdma support   Zhangfei Gao
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Qiao Zhou
• [PATCH v3 1/4] clk: add DT clock binding support   Shawn Guo
• [PATCH 1/5] ARM: dts: imx28.dtsi: Add auart support   Fabio Estevam
• [PATCH 2/5] ARM: dts: mx28evk: Add auart0 and auart3 support   Fabio Estevam
• [PATCH 3/5] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [PATCH 4/5] ARM: mxs_defconfig: Let AUART driver be built by default   Fabio Estevam
• [PATCH 5/5] dt: fsl-mxs-auart.txt: Add documentation for mxs-auart binding   Fabio Estevam
• [PATCH v3 1/4] clk: add DT clock binding support   Rob Herring
• Converting kirkwood-goflexnet to DTS   Josh Coombs
• [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare   Rajendra Nayak
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Qiao Zhou
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [GIT PULL] DMA-mapping fixes for v3.5-rc3   Marek Szyprowski
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCH] common: dma-mapping: add support for generic dma_mmap_* calls   Marek Szyprowski
• Converting kirkwood-goflexnet to DTS   Andrew Lunn
• [PATCH 2/3] ARM: OMAP2+: onenand: cleanup for gpmc driver conversion   Mohammed, Afzal
• [PATCH 2/3 v2] clk: add versatile ICST307 driver   Linus Walleij
• [PATCH 3/3 v2] ARM: integrator: convert to common clock   Linus Walleij
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH] ARM: imx27/dt: make dt_compat entry const   Sascha Hauer
• [PATCH 1/5] ARM: dts: imx28.dtsi: Add auart support   Wolfram Sang
• [PATCH] ARM: imx_v4_v5_defconfig: Allow booting from MMC card   Sascha Hauer
• [PATCH v3] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Gregory Clement
• [PATCH v3 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Gregory Clement
• [PATCH v3 2/9] arm: mach-mvebu: add header   Gregory Clement
• [PATCH v3 3/9] arm: mach-mvebu: add source files   Gregory Clement
• [PATCH v3 4/9] arm: mach-mvebu: add support for Armada 370 and Armada XP with DT   Gregory Clement
• [PATCH v3 5/9] arm: mach-mvebu: add documentation for new device tree bindings   Gregory Clement
• [PATCH v3 6/9] arm: mach-mvebu: add defconfig   Gregory Clement
• [PATCH v3 7/9] arm: mach-mvebu: add compilation/configuration change   Gregory Clement
• [PATCH v3 8/9] arm: mach-mvebu: add entry to MAINTAINERS   Gregory Clement
• [PATCH v3 9/9] ARM: mvebu: MPIC: read number of interrupts from control register   Gregory Clement
• [PATCH v3 7/9] arm: mach-mvebu: add compilation/configuration change   Andrew Lunn
• [PATCH v3 7/9] arm: mach-mvebu: add compilation/configuration change   Gregory CLEMENT
• ARM: iMX: lockup with irqs disabled in drivers/tty/imx.c   Michael McTernan
• [PATCH v3 0/4] DT clock bindings   Shawn Guo
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Guennadi Liakhovetski
• Converting kirkwood-goflexnet to DTS   Thomas Petazzoni
• [PATCH 1/1] ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set   Lee Jones
• [PATCH 0/2] Exynos4: power domain fixes for v3.5-rc   Marek Szyprowski
• [PATCH 1/2] ARM: Exynos4: read initial state of power domain from hw registers   Marek Szyprowski
• [PATCH 2/2] ARM: Exynos4: pm_domains: register devices in 'need_restore' state   Marek Szyprowski
• [PATCH 1/5] ARM: dts: imx28.dtsi: Add auart support   Shawn Guo
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH v3 7/9] arm: mach-mvebu: add compilation/configuration change   Arnd Bergmann
• [PATCH v2 0/7] ARM: at91: add sparse irq support and introduce aic5   Ludovic Desroches
• [PATCH v2 1/7] ARM: at91: aic add dt support for external irqs   Ludovic Desroches
• [PATCH v2 2/7] ARM: at91: add of default irq priorities support   Ludovic Desroches
• [PATCH v2 3/7] ARM: at91: at91 based machines specify their own irq handler at run time   Ludovic Desroches
• [PATCH v2 4/7] ARM: at91: fix irq_alloc_descs parameters for sparse irq   Ludovic Desroches
• [PATCH v3 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Arnd Bergmann
• [PATCHv2 08/12] ARM: OMAP4: hwmod data: add SL2IF hardreset line   Cousson, Benoit
• [PATCH v2 4/7] ARM: at91: fix irq_alloc_descs parameters for sparse irq   Ludovic Desroches
• [PATCH v2 5/7] ARM: at91: sparse irq support   Ludovic Desroches
• [PATCH v2 6/7] ARM: at91: remove mach/irqs.h   Ludovic Desroches
• [PATCH v3 3/9] arm: mach-mvebu: add source files   Arnd Bergmann
• [PATCH v2 7/7] ARM: at91: add AIC5 support   Ludovic Desroches
• [PATCH v3 5/9] arm: mach-mvebu: add documentation for new device tree bindings   Arnd Bergmann
• [PATCH v3 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Gregory CLEMENT
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Guennadi Liakhovetski
• [RFC PATCH 03/11] arm: omap: device: create a device for system control module   Valentin, Eduardo
• [PATCH 03/16] ARM: imx: eliminate macro IRQ_GPIOx()   Dong Aisheng
• [PATCH 04/16] gpio/mxc: move irq_domain_add_legacy call into gpio driver   Dong Aisheng
• [PATCH 05/16] ARM: imx: move irq_domain_add_legacy call into tzic driver   Dong Aisheng
• [PATCH 06/16] ARM: imx: move irq_domain_add_legacy call into avic driver   Dong Aisheng
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Mark Brown
• [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data   Dong Aisheng
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Tony Lindgren
• How to add new params to DT?   Venu Byravarasu
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH] kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6   Rabin Vincent
• why do_translation_fault does not fill Page table entry?   Li Haifeng
• [PATCH v3 3/9] arm: mach-mvebu: add source files   Andrew Lunn
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Russell King - ARM Linux
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH] ARM: perf: return -EOPNOTSUPP if requested mode exclusion is unavailable   Will Deacon
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Tony Lindgren
• [PATCH v3 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Andrew Lunn
• [PATCH 3/3] ARM: OMAP2+: gpmc: handle additional timings   Mohammed, Afzal
• [PATCH v5 10/14] ARM: OMAP2+: gpmc: waitpin helper   Mohammed, Afzal
• [PATCH v5 00/14] GPMC driver conversion   Mohammed, Afzal
• [PATCH 2/8] ARM: OMAP2+: PM: introduce power domains functional states   Jean Pihet
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 5/8] ARM: OMAP2+: PM: introduce power domains achievable functional states   Jean Pihet
• [PATCH v2 1/3] ARM: dts: mx28evk: Add auart0 and auart3 support   Fabio Estevam
• [PATCH v2 2/3] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [PATCH v2 3/3] ARM: mxs_defconfig: Let AUART driver be built by default   Fabio Estevam
• [PATCH 01/10] ARM: OMAP2+: PM QoS: control the power domains next state from the constraints   Jean Pihet
• [PATCH v3 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Gregory CLEMENT
• [PATCH 09/14] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 1/5] ARM: dts: imx28.dtsi: Add auart support   Marek Vasut
• [PATCH v2 1/3] ARM: dts: mx28evk: Add auart0 and auart3 support   Marek Vasut
• [PATCH v2 2/3] serial: mxs-auart: Allow device tree probing   Marek Vasut
• [PATCH v2 3/3] ARM: mxs_defconfig: Let AUART driver be built by default   Marek Vasut
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Srinidhi Kasagar
• [PATCH v3 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Andrew Lunn
• ARM syscall restarting with TIF_SYSCALL_RESTARTSYS   Catalin Marinas
• [PATCH v2 2/3] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [PATCH] pinctrl/nomadik: document Alt-C glitch   Linus Walleij
• [PATCH v2 00/23] ARM: LPC32xx specific updates for next   Arnd Bergmann
• [PATCH v2 00/23] ARM: LPC32xx specific updates for next   Alexandre Pereira da Silva
• [PATCH v2 2/3] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [PATCH 08/16] ARM: imx: leave irq_base of wm8350_platform_data uninitialized   Dong Aisheng
• [PATCH 09/16] ARM: imx: pass gpio than irq number into mxc_expio_init   Dong Aisheng
• [PATCH 10/16] ARM: imx: add a legacy irqdomain for 3ds_debugboard   Dong Aisheng
• [PATCH v2 3/3] ARM: mxs_defconfig: Let AUART driver be built by default   Shawn Guo
• [PATCH v2 00/23] ARM: LPC32xx specific updates for next   Roland Stigge
• Converting kirkwood-goflexnet to DTS   Josh Coombs
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Tony Lindgren
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Lee Jones
• [PATCH v2 3/3] ARM: mxs_defconfig: Let AUART driver be built by default   Subodh Nijsure
• [PATCH v5 00/14] GPMC driver conversion   Tony Lindgren
• [PATCH v2 3/3] ARM: mxs_defconfig: Let AUART driver be built by default   Marek Vasut
• Converting kirkwood-goflexnet to DTS   Thomas Petazzoni
• Converting kirkwood-goflexnet to DTS   Arnaud Patard (Rtp)
• Converting kirkwood-goflexnet to DTS (Josh Coombs)   Andrew Lunn
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Srinidhi Kasagar
• [PATCH v2 2/3] serial: mxs-auart: Allow device tree probing   Shawn Guo
• [PATCH v2 3/3] ARM: mxs_defconfig: Let AUART driver be built by default   Shawn Guo
• [PATCH v3 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Nicolas Pitre
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCHv2 02/12] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Cousson, Benoit
• [PATCH] ARM: OMAP2: twl-common: Fix compiler warning   Peter Ujfalusi
• [PATCH] kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6   Tixy
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Srinidhi Kasagar
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH] kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6   Rabin Vincent
• How to add new params to DT?   Arnd Bergmann
• [RESEND/PATCHv5 1/2] drivers: input: keypad: Add device tree support   Poddar, Sourav
• [PATCH] kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6   Tixy
• [RESEND/PATCHv5 2/2] arm/dts: omap4-sdp: Add keypad data   Poddar, Sourav
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Shawn Guo
• [PATCH v3 1/2] ARM: dts: mx28evk: Add auart0 and auart3 support   Fabio Estevam
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [PATCH v3 0/4] DT clock bindings   Stephen Warren
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Marek Vasut
• [PATCH v3 1/2] ARM: dts: mx28evk: Add auart0 and auart3 support   Marek Vasut
• Where to power on the wifi device before loading the driver.   Stephen Warren
• [PATCH v3 0/4] syscall_trace fixes and cleanups   Will Deacon
• [PATCH v3 1/4] audit: arm: only allow syscall auditing for pure EABI userspace   Will Deacon
• [PATCH v3 2/4] ARM: entry: don't bother with syscall tracing on ret_from_fork path   Will Deacon
• [PATCH v3 3/4] ARM: audit: move syscall auditing until after ptrace SIGTRAP handling   Will Deacon
• [PATCH v3 4/4] ARM: ptrace: provide separate functions for tracing syscall {entry, exit}   Will Deacon
• [PATCH] pinctrl/nomadik: document Alt-C glitch   Stephen Warren
• How to use linear mapping without DT?   Shawn Guo
• [PATCH v3 1/2] ARM: dts: mx28evk: Add auart0 and auart3 support   Shawn Guo
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Shawn Guo
• How to use linear mapping without DT?   Mark Brown
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Mitch Bradley
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Marek Vasut
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Stephen Warren
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [PATCH v2 0/2] Implement word-at-a-time string functions for ARM   Will Deacon
• [PATCH v2 1/2] ARM: use generic strnlen_user and strncpy_from_user functions   Will Deacon
• [PATCH v2 2/2] ARM: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs   Will Deacon
• Where to power on the wifi device before loading the driver.   Franky Lin
• How to use linear mapping without DT?   ludovic.desroches
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Marek Vasut
• [PATCH 1/4] serial: imx: Remove unneeded '#ifdef CONFIG_OF'   Fabio Estevam
• [PATCH 2/4] mmc: sdhci-esdhc-imx: Remove unneeded '#ifdef CONFIG_OF'   Fabio Estevam
• [PATCH 3/4] ARM: clk-imx27: Remove unneeded '#ifdef CONFIG_OF'   Fabio Estevam
• [PATCH 4/4] ARM: clk-imx51-imx53: Remove unneeded '#ifdef CONFIG_OF'   Fabio Estevam
• Device Tree, abstraction of the SoC or the board?   Thomas Petazzoni
• [PATCH 1/4] serial: imx: Remove unneeded '#ifdef CONFIG_OF'   Fabio Estevam
• Device Tree, abstraction of the SoC or the board?   Arnd Bergmann
• [PATCH v3 0/4] DT clock bindings   Rob Herring
• Converting kirkwood-goflexnet to DTS   Josh Coombs
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   zumeng.chen
• [PATCH 0/3] OMAP: hwmod: reset API proposal   Omar Ramirez Luna
• [PATCH 1/3] ARM: OMAP: hwmod: partially un-reset hwmods might not be properly enabled   Omar Ramirez Luna
• [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence   Omar Ramirez Luna
• [PATCH 3/3] ARM: OMAP: omap_device: expose hwmod assert/deassert to omap devices   Omar Ramirez Luna
• [PATCH 0/6] OMAP: iommu: hwmod, reset handling and runtime PM   Omar Ramirez Luna
• [PATCH 1/6] ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected   Omar Ramirez Luna
• [PATCH 2/6] ARM: OMAP3: hwmod data: add mmu data for iva and isp   Omar Ramirez Luna
• [PATCH 3/6] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Omar Ramirez Luna
• [PATCH 4/6] ARM: OMAP3/4: iommu: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH 5/6] ARM: OMAP2+: iommu: add reset handling   Omar Ramirez Luna
• [PATCH 6/6] ARM: OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Shawn Guo
• [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing   Shawn Guo
• How to use linear mapping without DT?   Shawn Guo
• [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data   Shawn Guo
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH v2 0/3] Prepare for GPMC driver conversion   Afzal Mohammed
• [PATCH v2 1/3] ARM: OMAP2+: nand: unify init functions   Afzal Mohammed
• [PATCH v2 2/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Afzal Mohammed
• [PATCH v2 3/3] ARM: OMAP2+: gpmc: handle additional timings   Afzal Mohammed
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [PATCH] SPI: OMAP: fix over-eager devm_xxx() conversion (was: Re: [CFT 07/11] spi: omap2-mcspi: add DMA engine support)   Russell King - ARM Linux
• kernel fault in get_dump_page on at91   Gilles Chanteperdrix
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Marek Vasut
• [PATCH] leds: Add DT support for leds-pca9532   Roland Stigge
• [PATCH] mmc: mmci.c: Defer probe() in case of missing GPIOs   Roland Stigge
• [PATCH] mmc: mmci.c: Defer probe() in case of missing GPIOs   Russell King - ARM Linux
• [PATCH] mmc: mmci.c: Defer probe() in case of missing GPIOs   Roland Stigge
• [PATCH] mmc: mmci.c: Defer probe() in case of missing GPIOs   Russell King - ARM Linux
• [PATCH] leds: Add DT support for leds-pca9532   Stephen Warren
• [PATCH v2] mmc: mmci.c: Defer probe() in case of yet uninitialized GPIOs   Roland Stigge
• [PATCH v2] mmc: mmci.c: Defer probe() in case of yet uninitialized GPIOs   Arnd Bergmann
• [PATCH v2] mmc: mmci.c: Defer probe() in case of yet uninitialized GPIOs   Roland Stigge
• [PATCH] arm: versatile: fix and enable PCI I/O space   Olof Johansson
• [PATCH] ARM: Kirkwood: Fix clk problems modular ethernet driver   Olof Johansson
• [GIT PULL] ARM: SoC fixes   Olof Johansson
• [GIT PULL] Nomadik updates   Olof Johansson
• [PATCH] ARM: mx23: Add initial support for olinuxino board   Fabio Estevam
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Roland Stigge
• [PATCH v3 1/2] mmc: mmci.c: Defer probe() in case of yet uninitialized GPIOs   Roland Stigge
• [PATCH v3 2/2] mmc: mmci.c: Remove wrong error handling of gpio 0   Roland Stigge
• [PATCH] ARM: mx23: Add initial support for olinuxino board   Marek Vasut
• [PATCH] leds: Add DT support for leds-pca9532   Roland Stigge
• Converting kirkwood-goflexnet to DTS   Josh Coombs
• [PATCH] ARM: mx23: Add initial support for olinuxino board   Fabio Estevam
• [PATCH] arm: fix iconnect build   Willy Tarreau
• [PATCH] ARM: mx23: Add initial support for olinuxino board   Fabio Estevam
• [GIT PULL] remoteproc fixes   Ohad Ben-Cohen
• [PATCH] ARM: mx23: Add initial support for olinuxino board   Sascha Hauer
• [PATCH 1/2] serial/amba-pl011: use devm_* allocators   Linus Walleij
• [PATCH 2/2] serial/amba-pl011: fix ages old copy-paste errors   Linus Walleij
• [PATCH v2] ARM: mx23: Add initial support for olinuxino board   Fabio Estevam
• [PATCH v2] ARM: mx23: Add initial support for olinuxino board   Marek Vasut
• [PATCH 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Fabio Estevam
• [PATCH 2/2] ARM: mach-mxs: Remove board entries in dt_board_compat   Fabio Estevam
• [PATCH 2/2] ARM: mach-mxs: Remove board entries in dt_board_compat   Marek Vasut
• [PATCH] arm: fix iconnect build   Arnaud Patard (Rtp)
• [PATCH] arm: fix iconnect build   Willy Tarreau
• [PATCH 1/2] serial/amba-pl011: use devm_* allocators   Fabio Estevam
• [PATCH v3 1/2] mmc: mmci.c: Defer probe() in case of yet uninitialized GPIOs   Russell King - ARM Linux
• [PATCH 1/1] ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set   Linus Walleij
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH v2] ARM: iconnect: Remove include of removed linux/spi/orion_spi.h   Olof Johansson
• [PATCH] ARM: ux500: bump i2c bus speed to 400kHz   Linus Walleij
• [PATCH v3 1/2] mmc: mmci.c: Defer probe() in case of yet uninitialized GPIOs   Linus Walleij
• [PATCH] leds: Add DT support for leds-pca9532   Stephen Warren
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Linus Walleij
• [PATCH v3 2/2] mmc: mmci.c: Remove wrong error handling of gpio 0   Linus Walleij
• [RFC/PATCH 0/1] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH] regulator: Add ramp_delay to regulator constraints to get used as a configurable parameter.   Mark Brown
• [PATCH] ARM: ux500: bump i2c bus speed to 400kHz   Marek Vasut
• [PATCH net-next] net: lpc_eth: free skbs in start_xmit   David Miller
• RFC: [PATCH] ARM: Kirkwood: clk_register_gate_fn: add fn assignment   Marc Kleine-Budde
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Kyungmin Park
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Olof Johansson
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Stephen Warren
• [PATCH v2 2/7] ARM: at91: add of default irq priorities support   Rob Herring
• How to add new params to DT?   Venu Byravarasu
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Paul Walmsley
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Kyungmin Park
• [PATCH] Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck intransition state.   Lokesh Vutla
• [PATCH] Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck intransition state.   Shilimkar, Santosh
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Tony Lindgren
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCH] ARM: ux500: bump i2c bus speed to 400kHz   Linus Walleij
• [PATCHv3 0/7] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc   Paul Walmsley
• [PATCHv3 1/7] ARM: OMAP: PM: Lock clocks list while generating summary   Paul Walmsley
• [PATCHv3 2/7] ARM: OMAP2+: hwmod code/data: fix 32K sync timer   Paul Walmsley
• [PATCHv3 3/7] ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby   Paul Walmsley
• [PATCHv3 4/7] ARM: OMAP4: hwmod data: fix 32k sync timer idle modes   Paul Walmsley
• [PATCHv3 5/7] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Paul Walmsley
• [PATCHv3 6/7] ARM: OMAP2+: CM: increase the module disable timeout   Paul Walmsley
• [PATCHv3 7/7] ARM: OMAP2+: mux: fix sparse warning   Paul Walmsley
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCH 1/2] serial/amba-pl011: use devm_* allocators   Linus Walleij
• [CFT 07/11] spi: omap2-mcspi: add DMA engine support   Shubhrajyoti
• [PATCH 1/1] ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set   Lee Jones
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• Where to power on the wifi device before loading the driver.   Rakesh Kumar
• RFC: [PATCH] ARM: Kirkwood: clk_register_gate_fn: add fn assignment   Andrew Lunn
• [PATCH/RFC 0/2] ARM: DMA-mapping: new extensions for buffer sharing (part 2)   Hiroshi Doyu
• RFC: [PATCH] ARM: Kirkwood: clk_register_gate_fn: add fn assignment   Marc Kleine-Budde
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Srinidhi Kasagar
• mach/io.h cleanup and removal question   Andrew Lunn
• Where to power on the wifi device before loading the driver.   Laxman Dewangan
• RFC: [PATCH] ARM: Kirkwood: clk_register_gate_fn: add fn assignment   Andrew Lunn
• [PATCH] ARM:Orion5x: Fix panic at boot for PCI IO reservation   Andrew Lunn
• Current state of AM33xx patches   Hiremath, Vaibhav
• [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data   Dong Aisheng
• [PATCH 11/16] ARM: imx: add a legacy irqdomain for mx31ads   Dong Aisheng
• [PATCH 12/16] i2c: imx: remove unneeded mach/irqs.h inclusion   Dong Aisheng
• [PATCH 13/16] ARM: imx: remove unneeded mach/irq.h inclusion   Dong Aisheng
• [PATCH 14/16] tty: serial: imx: remove the use of MXC_INTERNAL_IRQS   Dong Aisheng
• Dove clock support (was: Re: RFC: [PATCH] ARM: Kirkwood: clk_register_gate_fn: add fn assignment)   Marc Kleine-Budde
• [PATCH v3] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Munegowda, Keshava
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Lee Jones
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Dong Aisheng
• Fwd: [PATCH 1/3] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• Dove clock support (was: Re: RFC: [PATCH] ARM: Kirkwood: clk_register_gate_fn: add fn assignment)   Andrew Lunn
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Dong Aisheng
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Lee Jones
• [PATCH/RFC 0/2] ARM: DMA-mapping: new extensions for buffer sharing (part 2)   Marek Szyprowski
• [PATCH] ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi   Stefan Roese
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Stefan Roese
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Roland Stigge
• [PATCH] spi: spi-pl022: Adjust probe() to of_get_named_gpio() returning -EPROBE_DEFER   Roland Stigge
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Mark Brown
• [RFC PATCH 0/5] omap: add ocp2scp as a misc driver   ABRAHAM, KISHON VIJAY
• [PATCHv3 5/7] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Cousson, Benoit
• Dove clock support   Sebastian Hesselbarh
• [PATCH] ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4   Cousson, Benoit
• Dove clock support   Marc Kleine-Budde
• [PATCH] OMAP7XX: Remove omap730.h and omap850.h   Paul Bolle
• Dove clock support   Sebastian Hesselbarh
• Dove clock support   Andrew Lunn
• mach/io.h cleanup and removal question   Russell King - ARM Linux
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Russell King - ARM Linux
• [PATCH 00/29] Move OMAP2+ over to use COMMON clock   Rajendra Nayak
• [PATCH] arm: zynq: Support GIC OF initialization   Michal Simek
• [PATCH] spi: spi-pl022: Adjust probe() to of_get_named_gpio() returning -EPROBE_DEFER   Roland Stigge
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Roland Stigge
• [PATCH] ARM: ux500: bump i2c bus speed to 400kHz   Marek Vasut
• [PATCH 2/3] ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices   Linus Walleij
• ARM SMP/GIC/LDS patches for Xilinx Zynq remoteproc   Michal Simek
• [RFC PATCH 1/8] ARM: gic: Support forcing cpumask for possible cpus in the system   Michal Simek
• [RFC PATCH 2/8] ARM: gic: Export gic_raise_softirq function for kernel modules   Michal Simek
• [RFC PATCH 3/8] ARM: gic: Introduce new gic_set_cpu   Michal Simek
• [RFC PATCH 4/8] ARM: smp: Move cpu initialization directly to ipi_cpu_stop   Michal Simek
• [RFC PATCH 5/8] AMP: smp: Extend number of IPIs   Michal Simek
• [RFC PATCH 6/8] ARM: smp: Use generic API for ipi   Michal Simek
• [RFC PATCH 7/8] ARM: vmlinux.lds: Setup physical load address not virtual   Michal Simek
• [RFC PATCH 8/8] ARM: vmlinux.lds: Setup correct entry point to physical address   Michal Simek
• [RFC PATCH v2 00/11] OMAP System Control Module   Konstantin Baydarov
• [RFC PATCH v2 01/11] ARM: OMAP4: Remove un-used control module headers and defines.   Konstantin Baydarov
• [RFC PATCH v2 02/11] ARM: OMAP: expose control.h to mach area   Konstantin Baydarov
• [RFC PATCH v2 03/11] mfd: omap: control: core system control driver   Konstantin Baydarov
• [RFC PATCH v2 04/11] OMAP2+: use control module mfd driver in omap_type   Konstantin Baydarov
• [RFC PATCH v2 05/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Konstantin Baydarov
• [RFC PATCH v2 06/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields   Konstantin Baydarov
• [RFC PATCH v2 07/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Konstantin Baydarov
• [RFC PATCH v2 08/11] omap4: thermal: add basic CPU thermal zone   Konstantin Baydarov
• [RFC PATCH v2 09/11] ARM: DT: Add support to system control module for OMAP4   Konstantin Baydarov
• [RFC PATCH 1/8] ARM: gic: Support forcing cpumask for possible cpus in the system   Russell King - ARM Linux
• [RFC PATCH 4/8] ARM: smp: Move cpu initialization directly to ipi_cpu_stop   Russell King - ARM Linux
• [RFC PATCH 5/8] AMP: smp: Extend number of IPIs   Russell King - ARM Linux
• [RFC PATCH 6/8] ARM: smp: Use generic API for ipi   Russell King - ARM Linux
• [RFC PATCH 8/8] ARM: vmlinux.lds: Setup correct entry point to physical address   Russell King - ARM Linux
• [PATCH 2/3] ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices   Lee Jones
• [RFC PATCH 1/8] ARM: gic: Support forcing cpumask for possible cpus in the system   Michal Simek
• [RFC PATCH 8/8] ARM: vmlinux.lds: Setup correct entry point to physical address   Michal Simek
• [PATCH] spi: spi-pl022: Adjust probe() to of_get_named_gpio() returning -EPROBE_DEFER   Linus Walleij
• Dove clock support   Marc Kleine-Budde
• [PATCH] spi: spi-pl022: Adjust probe() to of_get_named_gpio() returning -EPROBE_DEFER   Alexandre Pereira da Silva
• [RFC PATCH 4/8] ARM: smp: Move cpu initialization directly to ipi_cpu_stop   Michal Simek
• [RFC PATCH 6/8] ARM: smp: Use generic API for ipi   Michal Simek
• [RFC PATCH 5/8] AMP: smp: Extend number of IPIs   Michal Simek
• [PATCH] arm: zynq: Support GIC OF initialization   Rob Herring
• How to use linear mapping without DT?   ludovic.desroches
• [PATCH] arm: zynq: Support GIC OF initialization   Michal Simek
• [RFC PATCH v2 09/11] ARM: DT: Add support to system control module for OMAP4   Sergei Shtylyov
• [PATCH] spi: spi-pl022: Adjust probe() to of_get_named_gpio() returning -EPROBE_DEFER   Roland Stigge
• [PATCH v3] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Sunil Matange
• [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [PATCH] ARM: mx23: Add initial support for olinuxino board   Shawn Guo
• [PATCH] ARM: mx23: Add initial support for olinuxino board   Shawn Guo
• [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing   Shawn Guo
• [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing   Marek Vasut
• [PATCH] pinctrl: pinctrl-mxs: mxs_dt_node_to_map: fix typo free -> kfree   Marc Kleine-Budde
• [PATCH v3] ARM: mx23: Add initial support for olinuxino board   Fabio Estevam
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Olof Johansson
• [PATCH v4] ARM: mx23: Add initial support for olinuxino board   Fabio Estevam
• [PATCH v3] ARM: mx23: Add initial support for olinuxino board   Marek Vasut
• [PATCH v4] ARM: mx23: Add initial support for olinuxino board   Marek Vasut
• [PATCH] pinctrl: pinctrl-mxs: mxs_dt_node_to_map: fix typo free -> kfree   devendra.aaru
• [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data   Shawn Guo
• [RFC PATCH 7/8] ARM: vmlinux.lds: Setup physical load address not virtual   Nicolas Pitre
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Arnd Bergmann
• [PATCH] ARM: Orion: Fix Virtual/Physical mixup with watchdog   Andrew Lunn
• [PATCH] ARM:Orion5x: Fix panic at boot for PCI IO reservation   Andrew Lunn
• [PATCHv8 00/13] I2C cleanups   Shubhrajyoti D
• [PATCHv8 01/13] I2C: OMAP: I2C register restore only if context is lost   Shubhrajyoti D
• [PATCHv8 02/13] I2C: OMAP: Remove the definition of SYSS_RESETDONE_MASK   Shubhrajyoti D
• [PATCHv8 03/13] I2C: OMAP: Remove reset at init   Shubhrajyoti D
• [PATCHv8 04/13] I2C: OMAP: Recover from Bus Busy condition   Shubhrajyoti D
• [PATCHv8 05/13] I2C: OMAP: Optimise the remove code   Shubhrajyoti D
• [PATCHv8 06/13] I2C: OMAP: Correct I2C revision for OMAP3   Shubhrajyoti D
• [PATCHv8 07/13] I2C: OMAP: use devm_* functions   Shubhrajyoti D
• [PATCHv8 08/13] I2C: OMAP: Use SET_RUNTIME_PM_OPS   Shubhrajyoti D
• [PATCHv8 09/13] I2C: OMAP: Do not initialise the completion everytime   Shubhrajyoti D
• [PATCHv8 10/13] I2C: OMAP: simplify num_bytes handling   Shubhrajyoti D
• [PATCHv8 11/13] I2C: OMAP: decrease indentation level on data handling   Shubhrajyoti D
• [PATCHv8 12/13] I2C: OMAP: add blank lines   Shubhrajyoti D
• [PATCHv8 13/13] I2C: OMAP: simplify omap_i2c_ack_stat()   Shubhrajyoti D
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Shawn Guo
• [PATCH] ARM:Orion5x: Fix panic at boot for PCI IO reservation   Rob Herring
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Stephen Warren
• kernel fault in get_dump_page on at91   Will Deacon
• Where to power on the wifi device before loading the driver.   Stephen Warren
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Shawn Guo
• [PATCH 1/1] TPM: STMicroelectronics ST33 I2C/SPI & ST19 I2C   Kent Yoder
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Roland Stigge
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Stephen Warren
• [PATCHv8 10/13] I2C: OMAP: simplify num_bytes handling   Wolfram Sang
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Roland Stigge
• [PATCHv8 11/13] I2C: OMAP: decrease indentation level on data handling   Wolfram Sang
• [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing   Greg Kroah-Hartman
• [PATCHv8 13/13] I2C: OMAP: simplify omap_i2c_ack_stat()   Wolfram Sang
• [PATCHv8 00/13] I2C cleanups   Wolfram Sang
• [PATCH v4] ARM: mx23: Add initial support for olinuxino board   Shawn Guo
• [PATCH] arm: zynq: Support GIC OF initialization   John Linn
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Stephen Warren
• [PATCHv3 5/7] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Paul Walmsley
• [PATCH] ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4   Paul Walmsley
• [PATCH v2 2/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Jon Hunter
• [PATCH 0/3] ARM: OMAP2/3: Move McBSP fck alias to hwmod data   Paul Walmsley
• [PATCH v2 2/4] ARM: OMAP2+: hwmod: add omap_hwmod_get_main_clk() API   Paul Walmsley
• [PATCH] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Roland Stigge
• [PATCH 1/2] sound: tegra_wm8903: Adjust to of_get_named_gpio() change   Roland Stigge
• [PATCH 2/2] sound: tegra_alc5632: Adjust to of_get_named_gpio() change   Roland Stigge
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Russell King - ARM Linux
• [PATCH 1/2] sound: tegra_wm8903: Adjust to of_get_named_gpio() change   Mark Brown
• [PATCH 1/2] sound: tegra_wm8903: Adjust to of_get_named_gpio() change   Roland Stigge
• [PATCH 1/2] sound: tegra_wm8903: Adjust to of_get_named_gpio() change   Mark Brown
• [Patch v5 00/13] add imx usb driver for mx28/6x   Fabio Estevam
• [Patch v5 00/13] add imx usb driver for mx28/6x   Marek Vasut
• [PATCH 1/2] sound: tegra_wm8903: Adjust to of_get_named_gpio() change   Roland Stigge
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Mike Turquette
• [PATCH] sound/gpio: of_get_named_gpio() return -EPROBE_DEFER if GPIO deferred   Roland Stigge
• [Patch v5 00/13] add imx usb driver for mx28/6x   Fabio Estevam
• [PATCH] sound/gpio: of_get_named_gpio() return -EPROBE_DEFER if GPIO deferred   Stephen Warren
• [PATCH 1/2] sound: tegra_wm8903: Adjust to of_get_named_gpio() change   Alexandre Pereira da Silva
• [PATCH 2/2] sound: tegra_alc5632: Adjust to of_get_named_gpio() change   Alexandre Pereira da Silva
• [PATCH] sound/gpio: of_get_named_gpio() return -EPROBE_DEFER if GPIO deferred   Alexandre Pereira da Silva
• [PATCH 6/6] ARM: l2x0: Optimise the range based operations   Antti P Miettinen
• [PATCH 09/11] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Paul Walmsley
• [PATCH] watchdog: coh901327_wdt: use clk_prepare/unprepare   Pankaj Jangra
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Paul Walmsley
• [PATCH] pinctrl: select the proper symbol   Linus Walleij
• [RFC PATCH 7/8] ARM: vmlinux.lds: Setup physical load address not virtual   Michal Simek
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Hiremath, Vaibhav
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Paul Walmsley
• mach/io.h cleanup and removal question   Nicolas Pitre
• [PATCH-V2 0/4] ARM: OMAP2+: am33xx: Add clocktree and hwmod data   Hiremath, Vaibhav
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Mark Brown
• [PATCH] ARM: imx23-evk.dts: Fix total RAM size   Fabio Estevam
• [RFC PATCH 7/8] ARM: vmlinux.lds: Setup physical load address not virtual   Nicolas Pitre
• [RFC PATCH 7/8] ARM: vmlinux.lds: Setup physical load address not virtual   Michal Simek
• [GIT PULL] ARM: OMAP AM33xx: add PRCM support (for 3.6) (fwd)   Paul Walmsley
• [PATCH] gpio/mxc: use the edge_sel feature if available   Benoît Thébaudeau
• [PATCH v9] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH 01/29] clk: Add support for rate table based dividers   Mike Turquette
• [PATCH v5] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH RESEND] net: lpc_eth: Driver cleanup   Roland Stigge
• [PATCH RESEND] gpio: LPC32xx: Driver cleanup   Roland Stigge
• [PATCH] ARM: OMAP2+: CLEANUP: Remove ARCH_OMAPx ifdef from struct dpll_data   Paul Walmsley
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Rob Lee
• [PATCH RESEND] ARM: omap: Fix dts files w/ status property: "disable" -> "disabled"   Roland Stigge
• Dove clock support   Sebastian Hesselbarh
• [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing   Subodh Nijsure
• [GIT PULL]   Roland Stigge
• [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing   Fabio Estevam
• [GIT PULL] ARM: LPC32xx specific updates for next   Roland Stigge
• [PATCH] ARM: tegra: make tegra_cpu_reset_handler_enable() __init   Stephen Warren
• [RFC PATCH 7/8] ARM: vmlinux.lds: Setup physical load address not virtual   Nicolas Pitre
• [PATCH v5] input: keyboard: Add keys driver for the LPC32xx SoC   Alexandre Pereira da Silva
• [PATCH] ARM: imx28.dtsi: Add pinmux for additional AUART ports   Fabio Estevam
• [PATCHv3 5/7] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Cousson, Benoit
• [PATCH] Fixes console on AUART issue for MX28 platform   Subodh Nijsure
• Dove clock support (was: Re: RFC: [PATCH] ARM: Kirkwood: clk_register_gate_fn: add fn assignment)   Simon Baatz
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Samuel Ortiz
• Dove clock support   Sebastian Hesselbarh
• [PATCH 2/2] mfd: anatop: permit adata be NULL when access register   Rob Lee
• [PATCH] ARM: tegra: make tegra_cpu_reset_handler_enable() __init   Olof Johansson
• [PATCH 1/2] serial/amba-pl011: use devm_* allocators   Greg Kroah-Hartman
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex Net   Josh Coombs
• [Patch v5 00/13] add imx usb driver for mx28/6x   Chen Peter-B29397
• [PATCH] ARM: imx23-evk.dts: Fix total RAM size   Shawn Guo
• Where to power on the wifi device before loading the driver.   Philip Rakity
• [PATCH] gpio/mxc: use the edge_sel feature if available   Shawn Guo
• [PATCH] ARM: imx23-evk.dts: Fix total RAM size   Fabio Estevam
• [Patch v5 00/13] add imx usb driver for mx28/6x   Fabio Estevam
• [PATCH] ARM: imx23-evk.dts: Fix total RAM size   Shawn Guo
• [PATCH 09/29] ARM: omap: clk: Nuke plat/clock.c & reuse struct clk as clk_hw_omap   Mike Turquette
• [PATCH] Fixes console on AUART issue for MX28 platform   Shawn Guo
• pm runtime and system suspend resume   chao xie
• [PATCH] ARM: imx28.dtsi: Add pinmux for additional AUART ports   Shawn Guo
• [Patch v5 00/13] add imx usb driver for mx28/6x   Marek Vasut
• [Patch v5 00/13] add imx usb driver for mx28/6x   Fabio Estevam
• [PATCH] GPIOLIB: add generic gpio_set_pull API   Barry Song
• [RFC PATCH 7/8] ARM: vmlinux.lds: Setup physical load address not virtual   Michal Simek
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCH 09/11] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks   Rajendra Nayak
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Stefan Roese
• [PATCH 01/29] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Shawn Guo
• [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data   Dong Aisheng
• [PATCH v2 2/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [Patch v5 00/13] add imx usb driver for mx28/6x   Shawn Guo
• [PATCH] leds: Add DT support for leds-pca9532   Thierry Reding
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Dong Aisheng
• [PATCH 2/2] sound: tegra_alc5632: Adjust to of_get_named_gpio() change   Leon Romanovsky
• [PATCH 3/3] ASoC: follow the updated samsung DMA common operations   Boojin Kim
• [PATCH v2 2/7] ARM: at91: add of default irq priorities support   ludovic.desroches
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Shawn Guo
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Kyungmin Park
• [GIT PULL] Integrator common clock   Linus Walleij
• [PATCH v2] PINCTRL: SiRF: add GPIO and GPIO irq support in CSR SiRFprimaII   Barry Song
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex Net   Simon Baatz
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Dong Aisheng
• [PATCH RESEND] net: lpc_eth: Driver cleanup   David Miller
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Shawn Guo
• [PATCH v2 0/5] ARM: topology: set the capacity of each cores for big.LITTLE   Vincent Guittot
• [PATCH v2 1/5] ARM: topology: Add arch_scale_freq_power function   Vincent Guittot
• [PATCH v2 2/5] ARM: topology: factorize the update of sibling masks   Vincent Guittot
• [PATCH v2 3/5] ARM: topology: Update cpu_power according to DT information   Vincent Guittot
• [PATCH v2 4/5] sched, x86: Remove broken power estimation   Vincent Guittot
• [PATCH v2 5/5] sched: cpu_power: enable ARCH_POWER   Vincent Guittot
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Minchan Kim
• [PATCH 2/3] spi: Add the use of DMA config operation   Kukjin Kim
• [PATCH 1/3] ARM: SAMSUNG: Add config() function in DMA common operations   Kukjin Kim
• [PATCH 3/3] ASoC: follow the updated samsung DMA common operations   Kukjin Kim
• [PATCH] ARM: S3C64XX: Add IRQ mapping for wm0010 on Cragganmore   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Add module identification for Balblair Cragganmore module   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Add WM5102 EVM to Cragganmore modules   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Dynamically allocate the IRQ range for WM8994 on Cragganmore   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Dynamically assign interrupts for CPU PMIC on Cragganmore   Kukjin Kim
• arch/arm/mach-s3c2410/Kconfig is unsourced   Kukjin Kim
• [PATCH] ARM: s3c24xx: remove unused header   Kukjin Kim
• [PATCH 1/2] serial: samsung: Remove NULL checking for baud clock   Kukjin Kim
• [PATCH] ARM: exynos: add UART3 to DEBUG_LL ports   Kukjin Kim
• [PATCH] ARM: exynos: enable more platforms in defconfig   Kukjin Kim
• [PATCH v2 5/5] sched: cpu_power: enable ARCH_POWER   Yong Zhang
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH] ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support   Hui Wang
• Where to power on the wifi device before loading the driver.   Wei Ni
• Where to power on the wifi device before loading the driver.   Mark Brown
• [PATCHv8 13/13] I2C: OMAP: simplify omap_i2c_ack_stat()   Shubhrajyoti Datta
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCH 2/2] sound: tegra_alc5632: Adjust to of_get_named_gpio() change   Alexandre Pereira da Silva
• [PATCH] ARM: sa1100: remove lart.h   Paul Bolle
• [PATCH 2/2] sound: tegra_alc5632: Adjust to of_get_named_gpio() change   Roland Stigge
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Arnd Bergmann
• [PATCH v2 0/4] OMAP:IOMMU:Add L1 and L2 cache flush   Gupta, Ramesh
• [PATCH v2 1/4] ARM: new cache maintenance api for iommu mem flush   Gupta, Ramesh
• [PATCH v2 2/4] ARM: add flush_mem api for ARMv6   Gupta, Ramesh
• [PATCH v2 3/4] ARM: add flush_mem api for ARMv7   Gupta, Ramesh
• [PATCH 4/4] OMAP:IOMMU:flush L1 and L2 caches   Gupta, Ramesh
• [PATCH] clk: SPEAr600: Fix ethernet clock name for DT based probing   Stefan Roese
• [RESEND][PATCH v2 0/4] OMAP:IOMMU:Add L1 and L2 cache flush   Gupta, Ramesh
• [PATCH] gpio/mxc: use the edge_sel feature if available   Benoît Thébaudeau
• [PATCH] pinctrl/u300: delete pointless debug print   Linus Walleij
• [alsa-devel] [PATCH v2 1/5] dmaengine: mmp_tdma: add mmp tdma support   zhangfei gao
• [Patch v5 00/13] add imx usb driver for mx28/6x   Fabio Estevam
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex Net   Josh Coombs
• [PATCH 3/6] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Cousson, Benoit
• [Patch v5 00/13] add imx usb driver for mx28/6x   Shawn Guo
• [PATCHv3 6/7] ARM: OMAP2+: CM: increase the module disable timeout   Sergei Shtylyov
• [Patch v5 00/13] add imx usb driver for mx28/6x   Marek Vasut
• [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform   Dong Aisheng
• [PATCH] gpio/mxc: use the edge_sel feature if available   Benoît Thébaudeau
• [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx   Dong Aisheng
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCHv8 13/13] I2C: OMAP: simplify omap_i2c_ack_stat()   Wolfram Sang
• [Patch v5 00/13] add imx usb driver for mx28/6x   Fabio Estevam
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Tony Lindgren
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex Net   Arnd Bergmann
• [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx   Shawn Guo
• [GIT PULL] SPEAr pinctrl updates for v-3.5   viresh kumar
• [RFC] Support for 'Coda' video codec IP.   Javier Martin
• [RESEND/PATCHv5 1/2] drivers: input: keypad: Add device tree support   Poddar, Sourav
• [RESEND/PATCHv5 2/2] arm/dts: omap4-sdp: Add keypad data   Poddar, Sourav
• pm runtime and system suspend resume   Alan Stern
• [PATCH] ARM: mxs: store mac address read from OTP in device tree   Shawn Guo
• [PATCH] ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support   Shawn Guo
• [PATCH v2 2/7] ARM: at91: add of default irq priorities support   Rob Herring
• [PATCH 3/6] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Omar Ramirez Luna
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   Paolo Pisati
• [PATCH 3/6] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Cousson, Benoit
• [RFC] Support for 'Coda' video codec IP.   Sascha Hauer
• [PATCH, RFC] i.MX DRM support   Fabio Estevam
• [Patch v5 00/13] add imx usb driver for mx28/6x   Fabio Estevam
• [Patch v5 00/13] add imx usb driver for mx28/6x   Dirk Behme
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex Net   Andrew Lunn
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex Net   Andrew Lunn
• Dove clock support   Andrew Lunn
• Dove clock support   Sebastian Hesselbarh
• Dove clock support   Andrew Lunn
• Dove clock support   Andrew Lunn
• [PATCH] clk: mxs: Fix the GPMI clock name   Fabio Estevam
• Dove clock support   Simon Baatz
• Dove clock support   Marc Kleine-Budde
• Dove clock support   Sebastian Hesselbarh
• [PATCH] clk: mxs: Fix the GPMI clock name   Marek Vasut
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex Net   Josh Coombs
• [PATCH] pinctrl/coh901: use clk_prepare_enable()   Linus Walleij
• [PATCH] pinctrl/u300: drop unused variable   Linus Walleij
• [PATCH] ARM: u300: convert to common clock   Linus Walleij
• Dove clock support   Simon Baatz
• [PATCH] clk: mxs: Register USB clocks for mx23   Fabio Estevam
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Fabio Estevam
• [Patch v5 11/13] ARM: dts: imx6q-sabrelite: add usb devices   Fabio Estevam
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Richard Zhao
• Where to power on the wifi device before loading the driver.   Stephen Warren
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Stephen Boyd
• Fwd: 2012 Kernel Summit: Call for Participation: 2nd CALL   Olof Johansson
• [PATCH 1/3] regulator: add pre-regulator support for 88pm860x   Anton Vorontsov
• pm runtime and system suspend resume   chao xie
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   Ming Lei
• [PATCH 1/3] regulator: add pre-regulator support for 88pm860x   jett zhou
• [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx   Dong Aisheng
• [RFC PATCH v2] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Josh Wu
• [RFC] Support for 'Coda' video codec IP.   Fabio Estevam
• [PATCH] pinctrl/coh901: use clk_prepare_enable()   Pankaj Jangra
• [PATCH] ARM: S3C64XX: Add IRQ mapping for wm0010 on Cragganmore   Kukjin Kim
• [PATCH 1/2] serial: samsung: Remove NULL checking for baud clock   Kukjin Kim
• [PATCH 2/2] serial: samsung: Fixed wrong comparison for baudclk_rate   Kukjin Kim
• [PATCH] serial: samsung: protect NULL dereference of clock name   Kukjin Kim
• [PATCH 1/1] pinctrl: pinctrl-mxs: fix a compiling error   Dong Aisheng
• [PATCH 1/1] pinctrl: pinctrl-mxs: fix a compiling error   Dong Aisheng
• [PATCH] ARM: remove unused SPI clock headers   Kukjin Kim
• [PATCH 1/1] pinctrl: pinctrl-mxs: fix a compiling error   Shawn Guo
• [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level   Zumeng Chen
• [PATCH] ARM: mxs: store mac address read from OTP in device tree   Dong Aisheng
• [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx   Shawn Guo
• Dove clock support   Andrew Lunn
• Dove clock support   Andrew Lunn
• [PATCH] ARM: Orion5x - Restore parts of io.h   Andrew Lunn
• [PATCH v2] arm: zynq: Support GIC OF initialization   Michal Simek
• [PATCH] ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support   Hui Wang
• [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx   Dong Aisheng
• [PATCH v2] ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support   Hui Wang
• [RFC PATCH 1/8] ARM: gic: Support forcing cpumask for possible cpus in the system   Michal Simek
• [PATCH v5] ARM: imx: Add basic imx6q cpu thermal management   Robert Lee
• [PATCH v5] ARM: imx: Add basic imx6q cpu thermal management   Robert Lee
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   T Krishnamoorthy, Balaji
• [PATCH] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL   Hui Wang
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Nicolas Ferre
• [RFC] Support for 'Coda' video codec IP.   javier Martin
• [RFC] Support for 'Coda' video codec IP.   javier Martin
• [PATCH] GPIOLIB: add generic gpio_set_pull API   Linus Walleij
• [PATCH] mmc: at91: fix bus speed   Prchal Jiří
• [PATCH RESEND] gpio: LPC32xx: Driver cleanup   Linus Walleij
• [PATCH v2] PINCTRL: SiRF: add GPIO and GPIO irq support in CSR SiRFprimaII   Linus Walleij
• [GIT PULL] SPEAr pinctrl updates for v-3.5   Linus Walleij
• [PATCH v5] ARM: imx: Add basic imx6q cpu thermal management   Rob Lee
• [PATCH] gpio/mxc: use the edge_sel feature if available   Linus Walleij
• [PATCH] clock: at91: fix PLLA overclocked warning   Prchal Jiří
• [PATCH v2] pinctrl/coh901: use clk_prepare_[en|dis]able()   Linus Walleij
• [PATCH v2 1/4] ARM: new cache maintenance api for iommu mem flush   Russell King - ARM Linux
• [PATCH v2 3/5] ARM: topology: Update cpu_power according to DT information   Vincent Guittot
• [PATCH v2 2/4] ARM: add flush_mem api for ARMv6   Russell King - ARM Linux
• [PATCH] mmc: at91: fix bus speed   ludovic.desroches
• [PATCH] ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6   AnilKumar Ch
• [PATCH] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL   Linus Walleij
• [RFC PATCH 1/2] irq_domain: correct a minor wrong comment for linear revmap   Dong Aisheng
• [RFC PATCH 2/2] irq: add irq_desc_initialize to remove some duplicated lines   Dong Aisheng
• [PATCH v2 1/4] ARM: new cache maintenance api for iommu mem flush   Gupta, Ramesh
• [RFC] Support for 'Coda' video codec IP.   Sascha Hauer
• [PATCH v2 2/4] ARM: add flush_mem api for ARMv6   Gupta, Ramesh
• [PATCH v2 1/5] ARM: topology: Add arch_scale_freq_power function   Vincent Guittot
• [PATCH v2 5/5] sched: cpu_power: enable ARCH_POWER   Vincent Guittot
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Linus Walleij
• Fwd: Re: [PATCH] mmc: at91: fix bus speed   ludovic.desroches
• [PATCH v3 0/5] ARM OMAP3530evm misc fixes   Zumeng Chen
• [PATCH 1/5] ARM: OMAP3EVM: Add NAND flash definition   Zumeng Chen
• [PATCH 2/5] ARM: OMAP3EVM: Adding USB internal LDOs board file   Zumeng Chen
• [PATCH 3/5] ARM: omap3evm: enable VBUS switch for EHCI tranceiver   Zumeng Chen
• [PATCH 4/5] ARM: OMAP3EVM: cosmetic fixes for parent clk set   Zumeng Chen
• [PATCH 5/5] ARM: OMAP3530evm: set pendown_state and debounce time for ads7846   Zumeng Chen
• [PATCH 1/2] serial/amba-pl011: use devm_* allocators   Linus Walleij
• [PATCH 1/8] ARM: OMAP2+: PM: protect the power domain state change by a mutex   Rajendra Nayak
• [PATCH] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL   Dong Aisheng
• [PATCH v2 5/5] sched: cpu_power: enable ARCH_POWER   Peter Zijlstra
• [PATCH] gpio/mxc: use the edge_sel feature if available   Sascha Hauer
• [PATCH] gpio/mxc: use the edge_sel feature if available   Sascha Hauer
• [PATCH v2] PINCTRL: SiRF: add GPIO and GPIO irq support in CSR SiRFprimaII   Barry Song
• Oops on boot for omap3xxx, EHCI fails.   Russ Dill
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Will Deacon
• [PATCH] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL   Hui Wang
• [RFC] Support for 'Coda' video codec IP.   Mark Brown
• [PATCH 1/2] serial/amba-pl011: use devm_* allocators   Russell King - ARM Linux
• [PATCH] GPIOLIB: add generic gpio_set_pull API   Barry Song
• [PATCH v5] ARM: imx: Add basic imx6q cpu thermal management   Sascha Hauer
• [PATCH v2] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set   Hui Wang
• [PATCH] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL   Hui Wang
• [RFC PATCH v2 02/11] ARM: OMAP: expose control.h to mach area   Tony Lindgren
• [RFC PATCH v2 03/11] mfd: omap: control: core system control driver   Tony Lindgren
• [RFC PATCH v2 04/11] OMAP2+: use control module mfd driver in omap_type   Tony Lindgren
• [RFC PATCH v2 06/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields   Tony Lindgren
• [PATCH v2] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set   Dong Aisheng
• [PATCHv8 03/13] I2C: OMAP: Remove reset at init   Tony Lindgren
• [PATCH 03/10] ARM: OMAP2+: PM QoS: manage the per-device latency constraints in hwmod   Rajendra Nayak
• [PATCH v5 0/7] cleanup imx5 idle, add imx5/6 cpuidle   Sascha Hauer
• [PATCHv8 06/13] I2C: OMAP: Correct I2C revision for OMAP3   Tony Lindgren
• [PATCH 04/10] ARM: OMAP: omap_device: register to the per-device PM QoS framework   Rajendra Nayak
• [RFC PATCH 3/3] arm: omap: phy: remove unused functions from omap-phy-internal.c   Tony Lindgren
• Where to power on the wifi device before loading the driver.   Mark Brown
• Bindings for SMC/HVC firmware interfaces on ARM (Re: [RFC PATCH] ARM: Make a compile trustzone conditionally)   Dave Martin
• [PATCH V2 0/6] Bridging PCI to amba   Alessandro Rubini
• [PATCH] ARM: EXYNOS: Add smc call to support trustzone feature   Dave Martin
• [PATCH 07/10] ARM: OMAP3: update cpuidle latency and threshold figures   Rajendra Nayak
• [PATCH 1/5] dmaengine: mmp_tdma: add mmp tdma support   Vinod Koul
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Arnd Bergmann
• Where to power on the wifi device before loading the driver.   Wei Ni
• [PATCH 03/10] ARM: OMAP2+: PM QoS: manage the per-device latency constraints in hwmod   Jean Pihet
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Tony Lindgren
• [PATCH 07/10] ARM: OMAP3: update cpuidle latency and threshold figures   Jean Pihet
• [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare   Tony Lindgren
• RF231 transceiver on at91sam9g20ek board   Alexander Smirnov
• [PATCH] ARM: Orion5x - Restore parts of io.h   Sergei Shtylyov
• [PATCH] ARM: LPC32XX: Cleanup USB clock init   Alexandre Pereira da Silva
• [PATCH 3/5] ARM: omap3evm: enable VBUS switch for EHCI tranceiver   Sergei Shtylyov
• [PATCH V2 0/6] Bridging PCI to amba   Linus Walleij
• [PATCH v2] arm: zynq: Support GIC OF initialization   Rob Herring
• [PATCH 00/15] Device Tree related re-works and clean-ups   Lee Jones
• [PATCH 01/15] mfd: Add IRQ domain support for the AB8500   Lee Jones
• [PATCH 02/15] mfd: Generically describe interactions with the DB8500 PRCMU   Lee Jones
• [PATCH 03/15] mfd: Make MFD core code Device Tree and IRQ domain aware   Lee Jones
• [PATCH 04/15] mfd: ab8500: Register devices using the newly DT:ed MFD API   Lee Jones
• [PATCH 05/15] mfd: db8500-prcmu: Register devices using the newly DT:ed MFD API   Lee Jones
• [PATCH 06/15] mfd: Register the ab8500 from db8500-prcmu using the MFD API   Lee Jones
• [PATCH 07/15] i2c: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 08/15] regulator: Stop initialising AB8500's registers during bring-up   Lee Jones
• [PATCH 09/15] pinctrl: pinctrl-nomadik: Fix possible memory leak   Lee Jones
• [PATCH 10/15] pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes   Lee Jones
• [PATCH 11/15] ARM: ux500: Remove AB8500 regulator register initialisation information   Lee Jones
• [PATCH 12/15] ARM: ux500: Ensure vendor specific properties have the vendor's identifier   Lee Jones
• [PATCH 13/15] ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure   Lee Jones
• [PATCH 14/15] ARM: ux500: Remove PMU platform registration when booting with DT   Lee Jones
• [PATCH 15/15] ARM: perf: handle muxed CPU IRQ lines   Lee Jones
• [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx   Shawn Guo
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Lee Jones
• [PATCHv8 06/13] I2C: OMAP: Correct I2C revision for OMAP3   Shubhrajyoti
• [PATCH 08/15] regulator: Stop initialising AB8500's registers during bring-up   Mark Brown
• [RFC] Support for 'Coda' video codec IP.   Shawn Guo
• [RESEND PATCH V3 2/2] arm/dts: OMAP2: Fix interrupt controller binding   Tony Lindgren
• [PATCH 08/15] regulator: Stop initialising AB8500's registers during bring-up   Lee Jones
• [PATCH] arm: OMAP depends on MMU   Tony Lindgren
• [PATCH 08/15] regulator: Stop initialising AB8500's registers during bring-up   Mark Brown
• [PATCH 15/15] ARM: perf: handle muxed CPU IRQ lines   Will Deacon
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Tony Lindgren
• [RFC] Support for 'Coda' video codec IP.   Mark Brown
• [PATCH 15/15] ARM: perf: handle muxed CPU IRQ lines   Lee Jones
• [PATCH 1/1] davinci:mcasp: Fix audio pll (pll-p) configure bug   Hebbar, Gururaja
• [RFC] Support for 'Coda' video codec IP.   Shawn Guo
• [PATCH] ARM: LPC32XX: Cleanup USB clock init   Roland Stigge
• [PATCH 15/15] ARM: perf: handle muxed CPU IRQ lines   Will Deacon
• [RFC] Support for 'Coda' video codec IP.   Shawn Guo
• [RFC] Support for 'Coda' video codec IP.   javier Martin
• [PATCH v5] ARM: imx: Add basic imx6q cpu thermal management   Rob Lee
• [PATCH 15/15] ARM: perf: handle muxed CPU IRQ lines   Lee Jones
• [RFC PATCH v2 03/11] mfd: omap: control: core system control driver   Konstantin Baydarov
• [PATCHv8 06/13] I2C: OMAP: Correct I2C revision for OMAP3   Tony Lindgren
• [PATCH v5 0/7] cleanup imx5 idle, add imx5/6 cpuidle   Rob Lee
• [PATCH v5] ARM: imx: Add basic imx6q cpu thermal management   Sascha Hauer
• [PATCH] ARM: OMAP2: twl-common: Fix compiler warning   Tony Lindgren
• [RFC] Support for 'Coda' video codec IP.   Shawn Guo
• [RFC] Support for 'Coda' video codec IP.   javier Martin
• [PATCH] clk: mxs: Fix the GPMI clock name   Shawn Guo
• [RFC] Support for 'Coda' video codec IP.   Mark Brown
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Rob Herring
• [PATCH] GPIOLIB: add generic gpio_set_pull API   Paul Mundt
• [RFC] Support for 'Coda' video codec IP.   Sascha Hauer
• [PATCH v5] ARM: imx: Add basic imx6q cpu thermal management   Rob Lee
• [RFC] Support for 'Coda' video codec IP.   Shawn Guo
• [PATCH] gpio: gpio-lpc32xx: Add gpio_to_irq mapping   Roland Stigge
• [PATCH] clk: mxs: Register USB clocks for mx23   Shawn Guo
• pm runtime and system suspend resume   Alan Stern
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Dave Martin
• [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx   Dong Aisheng
• [PATCH] gpio: gpio-lpc32xx: Add gpio_to_irq mapping   Alexandre Pereira da Silva
• [PATCH RESEND] ARM: omap: Fix dts files w/ status property: "disable" -> "disabled"   Tony Lindgren
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Shawn Guo
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Tony Lindgren
• Bindings for SMC/HVC firmware interfaces on ARM (Re: [RFC PATCH] ARM: Make a compile trustzone conditionally)   Rob Herring
• [PATCH] ARM: Orion5x - Restore parts of io.h   Arnd Bergmann
• [PATCH v3 0/5] ARM: topology: set the capacity of each cores for big.LITTLE   Vincent Guittot
• [PATCH v3 1/5] ARM: topology: Add arch_scale_freq_power function   Vincent Guittot
• [PATCH v3 2/5] ARM: topology: factorize the update of sibling masks   Vincent Guittot
• [PATCH v3 3/5] ARM: topology: Update cpu_power according to DT information   Vincent Guittot
• [PATCH v3 4/5] sched, x86: Remove broken power estimation   Vincent Guittot
• [PATCH v3 5/5] sched: cpu_power: enable ARCH_POWER   Vincent Guittot
• Bindings for SMC/HVC firmware interfaces on ARM (Re: [RFC PATCH] ARM: Make a compile trustzone conditionally)   Dave Martin
• AT91: RTC interrupt raised early at boot time   Thomas Petazzoni
• [PATCH v2] pinctrl/coh901: use clk_prepare_[en|dis]able()   Pankaj Jangra
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Stephen Warren
• [PATCH] ARM: Orion5x - Restore parts of io.h   Andrew Lunn
• [PATCH] ARM: Orion5x - Restore parts of io.h   Arnd Bergmann
• [PATCH 4/5] ARM: OMAP3EVM: cosmetic fixes for parent clk set   Jon Hunter
• [RFC PATCH] ARM: Make a compile trustzone conditionally   Arnd Bergmann
• [PATCH] ARM: S3C64XX: Add IRQ mapping for wm0010 on Cragganmore   Dimitris Papastamos
• Fwd: FW: [PATCH v2] arm: zynq: Support GIC OF initialization   John Linn
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Stephen Boyd
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• Where to power on the wifi device before loading the driver.   Stephen Warren
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [Patch v5 00/13] add imx usb driver for mx28/6x   Subodh Nijsure
• [PATCH] gpio/mxc: use the edge_sel feature if available   Benoît Thébaudeau
• [PATCH] ARM: S3C64XX: Add IRQ mapping for wm0010 on Cragganmore   Kukjin Kim
• [PATCH] gpio/mxc: use the edge_sel feature if available   Benoît Thébaudeau
• [RFC PATCH v2] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Brian Norris
• [Patchv2] ARM: Orion5x - Restore parts of io.h, with rework   Andrew Lunn
• [PATCH v2] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set   Linus Walleij
• [PATCH 07/15] i2c: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [GIT PULL] Integrator common clock   Mike Turquette
• [PATCH v2 2/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Jon Hunter
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Russell King - ARM Linux
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Jon Hunter
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Shawn Guo
• [PATCH 1/2] serial: samsung: Remove NULL checking for baud clock   Greg KH
• [PATCH 2/2] serial: samsung: Fixed wrong comparison for baudclk_rate   Greg KH
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Shawn Guo
• [PATCH] serial: samsung: protect NULL dereference of clock name   Greg KH
• [PATCH v3 2/5] ARM: topology: factorize the update of sibling masks   Namhyung Kim
• [PATCH] ARM: EXYNOS: Remove the L2 cache latency setting for EXYNOS5   Kukjin Kim
• [PATCH 3/5] ARM: omap3evm: enable VBUS switch for EHCI tranceiver   Zumeng Chen
• [alsa-devel] [PATCH 1/5] dmaengine: mmp_tdma: add mmp tdma support   zhangfei gao
• [PATCH 4/5] ARM: OMAP3EVM: cosmetic fixes for parent clk set   Zumeng Chen
• [PATCH v2] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set   Hui Wang
• [PATCH] i2c: let the core register devices from devicetree   Barry Song
• [PATCH] ARM: EXYNOS: Clear SYS_WDTRESET bit to use watchdog reset   Kukjin Kim
• pm runtime and system suspend resume   chao xie
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Chen Peter-B29397
• [PATCH v2] ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support   Shawn Guo
• [PATCH] ARM: mxs: store mac address read from OTP in device tree   Shawn Guo
• [PATCH v2] pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set   Dong Aisheng
• [PATCH v2 0/5] mmp audio support   zhangfei gao
• [GIT PULL] gpio/omap: cleanups for v3.5   NeilBrown
• [RFC PATCH v2] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Josh Wu
• [PATCH 1/5] DRM: Add i.MX drm core support   Shawn Guo
• [PATCH 2/5] DRM i.MX: Add parallel display support   Shawn Guo
• [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare   Rajendra Nayak
• How to use ARM ETM/ETB at linux?   Frank Li
• [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare   Paul Walmsley
• [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare   Rajendra Nayak
• [PATCH v4] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH 2/5] DRM i.MX: Add parallel display support   Shawn Guo
• [PATCH 3/5] DRM i.MX: Add LCDC support   Shawn Guo
• [V2 1/3] regulator: add pre-regulator support for 88pm860x   Jett.Zhou
• [V2 2/3] power_supply: Enable battery-charger for 88pm860x   Jett.Zhou
• [V2 3/3] ARM: MMP: add 88pm860x battery-charger support   Jett.Zhou
• [GIT PULL] Integrator common clock   Linus Walleij
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Rajendra Nayak
• [GIT PULL] gpio/omap: cleanups for v3.5   DebBarma, Tarun Kanti
• [PATCH v2 2/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [PATCH v6 00/14] add imx usb driver based on Greg next tree   Richard Zhao
• [PATCH v6 01/14] usb: chipidea: remove unneeded NULL check   Richard Zhao
• [PATCH v6 02/14] usb: chipidea: drop useless arch-check   Richard Zhao
• [PATCH v6 03/14] usb: chipidea: msm: add missing section annotation   Richard Zhao
• [PATCH v6 04/14] usb: chipidea: msm: add remove method   Richard Zhao
• [PATCH v6 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data   Richard Zhao
• [PATCH v6 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci   Richard Zhao
• [PATCH v6 07/14] USB: Chipidea: add unified ci13xxx_{add, remove}_device for platform drivers   Richard Zhao
• [PATCH v6 08/14] USB: Chipidea: add ci13xxx device id management   Richard Zhao
• [PATCH v6 09/14] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig   Richard Zhao
• [PATCH v6 10/14] usb: otg: add notify_connect/notify_disconnect callback   Richard Zhao
• [PATCH v6 11/14] USB: notify phy when root hub port connect change   Richard Zhao
• [PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v6 13/14] usb: otg: add basic mxs phy driver support   Richard Zhao
• [PATCH v6 14/14] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH] gpio/mxc: use the edge_sel feature if available   Sascha Hauer
• [PATCH v4] usb: chipidea: permit driver bindings pass phy pointer   Alexander Shishkin
• [PATCH 07/15] i2c: Add Device Tree support to the Nomadik I2C driver   Srinidhi Kasagar
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 1/5] DRM: Add i.MX drm core support   Sascha Hauer
• [PATCHv8 06/13] I2C: OMAP: Correct I2C revision for OMAP3   Shubhrajyoti Datta
• [RFC 13/24] ARM: omap4: clk: Add 44xx data using common struct clk   Tony Lindgren
• [PATCHv8 03/13] I2C: OMAP: Remove reset at init   Shubhrajyoti
• [PATCH 2/5] DRM i.MX: Add parallel display support   Sascha Hauer
• [PATCH 3/5] DRM i.MX: Add LCDC support   Sascha Hauer
• [PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer   Marc Kleine-Budde
• [PATCHv8 03/13] I2C: OMAP: Remove reset at init   Tony Lindgren
• [PATCH v6 00/14] add imx usb driver based on Greg next tree   Marc Kleine-Budde
• [PATCH v3 0/4] DT clock bindings   Chris Ball
• [PATCH 01/02] clk: Refactor of_clk_* into a new clk-of.c   Chris Ball
• [PATCH 02/02] clk: clk-of: Use alloc_bootmem() instead of kzalloc()   Chris Ball
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Linus Walleij
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Russell King - ARM Linux
• [PATCH] GPIOLIB: add generic gpio_set_pull API   Linus Walleij
• Fwd: Re: [PATCH] mmc: at91: fix bus speed   Prchal Jiří
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Linus Walleij
• Fwd: Re: [PATCH] mmc: at91: fix bus speed   ludovic.desroches
• [GIT PULL] PWM subsystem   Thierry Reding
• [PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v5] input: keyboard: Add keys driver for the LPC32xx SoC   Dmitry Torokhov
• [PATCH] ARM:MXS: Initial support for the Crystalfontz CFA-10036   Maxime Ripard
• [PATCH 1/2] Early support for the Crystalfontz CFA10036 module   Maxime Ripard
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Maxime Ripard
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Shawn Guo
• [PATCH v7] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v6 00/14] add imx usb driver based on Greg next tree   Richard Zhao
• [PATCH RESEND v4] input: keyboard: Add keys driver for the LPC32xx SoC   Dmitry Torokhov
• [PATCH] ARM: zImage: Allow DTB command line concatenation with ATAG_CMDLINE   Richard Genoud
• [PATCH v6 00/14] add imx usb driver based on Greg next tree   Marc Kleine-Budde
• [PATCHv8 03/13] I2C: OMAP: Remove reset at init   Shubhrajyoti
• [PATCH] ARM: zImage: Allow DTB command line concatenation with ATAG_CMDLINE   Florian Fainelli
• [PATCH] ARM: zImage: Allow DTB command line concatenation with ATAG_CMDLINE   Gregory CLEMENT
• [PATCH 1/2] Early support for the Crystalfontz CFA10036 module   Marek Vasut
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Marek Vasut
• [PATCH] ARM: zImage: Allow DTB command line concatenation with ATAG_CMDLINE   Richard Genoud
• [PATCHv9 0/8] I2C cleanups   Shubhrajyoti D
• [PATCHv9 1/8] I2C: OMAP: I2C register restore only if context is lost   Shubhrajyoti D
• [PATCHv9 2/8] I2C: OMAP: Optimise the remove code   Shubhrajyoti D
• [PATCHv9 3/8] I2C: OMAP: use devm_* functions   Shubhrajyoti D
• [PATCHv9 4/8] I2C: OMAP: Use SET_RUNTIME_PM_OPS   Shubhrajyoti D
• [PATCHv9 5/8] I2C: OMAP: Do not initialise the completion everytime   Shubhrajyoti D
• [PATCHv9 6/8] I2C: OMAP: Remove the definition of SYSS_RESETDONE_MASK   Shubhrajyoti D
• [PATCHv9 7/8] I2C: OMAP: Correct I2C revision for OMAP3   Shubhrajyoti D
• [PATCHv9 8/8] I2C: OMAP: Recover from Bus Busy condition   Shubhrajyoti D
• [PATCH] pinctrl: pinctrl-imx: only print debug message when DEBUG is defined   Dong Aisheng
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Maxime Ripard
• [V2 1/3] regulator: add pre-regulator support for 88pm860x   Mark Brown
• [PATCH] davinci:mcasp: Fix codec pll configure bug   Hebbar, Gururaja
• [PATCH 1/2] ARM: OMAP: USB: Fixup ehci_hcd_omap_probe error path   Russ Dill
• [PATCH 2/2] ARM: OMAP: USB: Fix omap3xxx EHCI regression caused by i693 errata fix.   Russ Dill
• [PATCH] ARM: dma-mapping: fix buffer chunk allocation order   Marek Szyprowski
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Marek Vasut
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Guennadi Liakhovetski
• [PATCH] gpio/mxc: use the edge_sel feature if available   Benoît Thébaudeau
• [V3 1/3] regulator: add pre-regulator support for 88pm860x   Jett.Zhou
• [PATCH 1/2] ARM: OMAP: USB: Fixup ehci_hcd_omap_probe error path   Sergei Shtylyov
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex Net   Josh Coombs
• [PATCH 02/02] clk: clk-of: Use alloc_bootmem() instead of kzalloc()   Paul Mundt
• [PATCH v3 0/3] Prepare for GPMC driver conversion   Afzal Mohammed
• [PATCHv3 2/3] mm: vmalloc: add VM_DMA flag to indicate areas used by dma-mapping framework   Marek Szyprowski
• [PATCH v3 1/3] ARM: OMAP2+: nand: unify init functions   Afzal Mohammed
• [PATCH v3 2/3] ARM: OMAP2+: gpmc: handle additional timings   Afzal Mohammed
• [PATCH v3 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Afzal Mohammed
• [PATCH] ARM:MXS: Initial support for the Crystalfontz CFA-10036   Shawn Guo
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Shawn Guo
• Current state of AM33xx patches   Daniel Mack
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex   Andrew Lunn
• [PATCH] ARM:MXS: Initial support for the Crystalfontz CFA-10036   Maxime Ripard
• pm runtime and system suspend resume   Alan Stern
• [RFC PATCH] ARM: Initial DTS support for Kirkwood GoFlex   Josh Coombs
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH v3 0/4] DT clock bindings   Rob Herring
• [PATCH v6 14/14] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH 1/2] ARM: OMAP: USB: Fixup ehci_hcd_omap_probe error path   Alan Stern
• [PATCH] ARM: zImage: Allow DTB command line concatenation with ATAG_CMDLINE   Nicolas Pitre
• [GIT PULL] omap fixes for v3.5-rc3   Tony Lindgren
• [PATCH v2 3/8] clk: mxs: add clock support for imx28   Marc Kleine-Budde
• [PATCH] Consolidate stack size information into THREAD_SIZE_ORDER   Tim Bird
• [PATCH v3 0/4] DT clock bindings   Mike Turquette
• [RFC PATCH v2] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Mike Dunn
• [PATCH] clk: mxs: mx23, mx28: fix clock lookup after freeing init memory   Marc Kleine-Budde
• N800 MMC broken on v3.5-rc3   Paul Walmsley
• [PATCH v2] Initial DTS support for Kirkwood GoFlex Net   Josh Coombs
• No subject   Paul Walmsley
• N800 MMC broken on v3.5-rc3   Paul Walmsley
• [PATCH] arm: ep93xx: Enable i2c support for ep9302   Martin Guy
• [PATCH v2 08/10] ARM: tegra: harmony: Initialize regulators from DT   Stephen Warren
• [PATCH v7] usb: chipidea: permit driver bindings pass phy pointer   Marc Kleine-Budde
• [PATCHv3 6/7] ARM: OMAP2+: CM: increase the module disable timeout   Paul Walmsley
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Rob Herring
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Stephen Warren
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Stephen Warren
• GPMI NAND on MX28 with DT.with   Subodh Nijsure
• [V3 1/3] regulator: add pre-regulator support for 88pm860x   Mark Brown
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Chen Peter-B29397
• pm runtime and system suspend resume   chao xie
• [GIT PULL] ARM: OMAP2+: clock/hwmod/warning fixes for 3.5-rc   Paul Walmsley
• [PATCH] clk: mxs: mx23, mx28: fix clock lookup after freeing init memory   Shawn Guo
• [PATCH] ARM:MXS: Initial support for the Crystalfontz CFA-10036   Shawn Guo
• [PATCH] clk: mxs: fix ref_io clock definition   Shawn Guo
• [PATCH] clk: mxs: mx23, mx28: fix clock lookup after freeing init memory   Turquette, Mike
• [PATCH] usb: gadget: pxa25x_udc: compile fix   Steve Bennett
• [PATCH] clk: mxs: mx23, mx28: fix clock lookup after freeing init memory   Shawn Guo
• [PATCH 2/5] DRM i.MX: Add parallel display support   Shawn Guo
• [PATCH 4/5] DRM: add i.MX IPUv3 base driver   Shawn Guo
• [PATCH v2 08/10] ARM: tegra: harmony: Initialize regulators from DT   Thierry Reding
• N800 MMC broken on v3.5-rc3   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: clock/hwmod/warning fixes for 3.5-rc   Tony Lindgren
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Tony Lindgren
• your mail   Tony Lindgren
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Russell King - ARM Linux
• [PATCH v4 0/3] Prepare for GPMC driver conversion   Afzal Mohammed
• [PATCH v4 1/3] ARM: OMAP2+: nand: unify init functions   Afzal Mohammed
• [PATCH v4 2/3] ARM: OMAP2+: gpmc: handle additional timings   Afzal Mohammed
• [PATCH v4 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Afzal Mohammed
• [PATCH 1/3] dmaengine: omap: add support for returning residue in tx_state method   Russell King
• [PATCH 2/3] dmaengine: omap: add support for setting fi   Russell King
• [PATCH 3/3] dmaengine: omap: add support for cyclic DMA   Russell King
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Russell King - ARM Linux
• [PATCH v2] ARM:MXS: Initial support for the Crystalfontz CFA-10036   Maxime Ripard
• [PATCH 1/2] ARM:MX28: Add additionnal muxing options to iMX28 DTSI   Maxime Ripard
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Maxime Ripard
• [PATCHv5] omap3: Add basic support for 720MHz part   Laurent Pinchart
• [PATCH 0/3] Add device tree support to AM33XX SoC   AnilKumar Ch
• [PATCH 1/4] Revert "arm/dts: Add support for TI AM335x EVM board"   AnilKumar Ch
• [PATCH 2/4] arm/dts: Add initial DT support for AM33XX SoC family   AnilKumar Ch
• [PATCH 3/4] arm/dts: Add support for AM335x EVM   AnilKumar Ch
• [PATCH 4/4] arm/dts: Add support for AM335x BeagleBone   AnilKumar Ch
• arm erratas (config options)   Alexander Holler
• [PATCH 1/2] ARM: OMAP2+: Fix MUSB ifdefs for platform init code   Felipe Balbi
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH] Consolidate stack size information into THREAD_SIZE_ORDER   Will Deacon
• arm erratas (config options)   Russell King - ARM Linux
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• arm erratas (config options)   Alexander Holler
• [PATCH] ARM: omap4: Fix standalone OMAP4 build break   Rajendra Nayak
• [PATCHv5 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Rajendra Nayak
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• i.MX28 die temperature   Juergen Beisert
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   Paolo Pisati
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Mark Brown
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v6 00/13] GPMC driver conversion   Afzal Mohammed
• [PATCH v6 01/13] ARM: OMAP2+: gpmc: platform definitions   Afzal Mohammed
• [PATCH v6 02/13] ARM: OMAP2+: gpmc: Adapt to HWMOD   Afzal Mohammed
• [PATCH v6 03/13] ARM: OMAP2+: gpmc: driver migration helper   Afzal Mohammed
• [PATCH v6 04/13] ARM: OMAP2+: gpmc: minimal driver support   Afzal Mohammed
• [PATCH v6 05/13] ARM: OMAP2+: gpmc: resource creation helpers   Afzal Mohammed
• [PATCH v6 06/13] ARM: OMAP2+: gpmc: CS configuration helper   Afzal Mohammed
• [PATCH v6 07/13] ARM: OMAP2+: gpmc: register time setting helper   Afzal Mohammed
• [PATCH v6 08/13] ARM: OMAP2+: gpmc: holler if no configuration   Afzal Mohammed
• [PATCH v6 09/13] ARM: OMAP2+: gpmc: waitpin helper   Afzal Mohammed
• arm erratas (config options)   Måns Rullgård
• [PATCH v6 10/13] ARM: OMAP2+: gpmc: handle connected peripherals   Afzal Mohammed
• [PATCH v6 11/13] ARM: OMAP2+: gpmc: cs reconfigure helper   Afzal Mohammed
• [PATCH v6 12/13] ARM: OMAP2+: gpmc: update nand register info   Afzal Mohammed
• [PATCH v6 13/13] ARM: OMAP2+: gpmc: configure writeprotect   Afzal Mohammed
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [Patchv2] ARM: Orion5x - Restore parts of io.h, with rework   Rob Herring
• [RFC PATCH v2 0/2] omap: add ocp2scp as a misc driver   Kishon Vijay Abraham I
• [RFC PATCH v2 1/2] drivers: misc: omap: add a new driver for ocp2scp   Kishon Vijay Abraham I
• [RFC PATCH v2 2/2] arm/dts: omap4: Add ocp2scp data   Kishon Vijay Abraham I
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Russell King - ARM Linux
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH] Atmel NAND ECC: Remove unaffected config option   Richard Genoud
• [PATCH v5 02/14] ARM: OMAP2+: gpmc: Adapt to HWMOD   Mohammed, Afzal
• [RFC PATCH 00/10] omap: musb: Add device tree support   Kishon Vijay Abraham I
• [RFC PATCH 01/10] drivers: usb: otg: add a new driver for omap usb2 phy   Kishon Vijay Abraham I
• [RFC PATCH 02/10] arm/dts: omap: Add omap-usb2 dt data   Kishon Vijay Abraham I
• [RFC PATCH 03/10] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Kishon Vijay Abraham I
• [RFC PATCH 04/10] drivers: usb: twl6030: Add dt support for twl6030 usb   Kishon Vijay Abraham I
• [RFC PATCH 05/10] arm/dts: Add twl6030-usb data   Kishon Vijay Abraham I
• [RFC PATCH 06/10] drivers: usb: twl4030: Add device tree support for twl4030 usb   Kishon Vijay Abraham I
• [RFC PATCH 07/10] arm/dts: Add twl4030-usb data   Kishon Vijay Abraham I
• [RFC PATCH 08/10] drivers: usb: musb: Add device tree support for omap musb glue   Kishon Vijay Abraham I
• [RFC PATCH 09/10] arm/dts: omap: Add usb_otg and glue data   Kishon Vijay Abraham I
• [RFC PATCH 10/10] arm: omap: phy: remove unused functions from omap-phy-internal.c   Kishon Vijay Abraham I
• [PATCH] gpio/mxc: use the edge_sel feature if available   Guennadi Liakhovetski
• [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk   Rajendra Nayak
• [PATCH 01/11] ARM: omap: clk: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 02/11] mmc: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 03/11] hwrng: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 04/11] mfd: omap-usb: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 06/11] gpio/omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 07/11] w1: omap_hdq: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 08/11] crypto: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 09/11] iommu: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 10/11] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• [PATCH 11/11] ARM: omap: clk: Remove all direct dereferencing of struct clk   Rajendra Nayak
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH v3 3/4] dt: add clock binding doc to primecell bindings   Ben Dooks
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [GIT PULL] ARM: OMAP: HDQ: convert HDQ to runtime PM   Paul Walmsley
• [PATCH v3 3/4] dt: add clock binding doc to primecell bindings   Russell King - ARM Linux
• GPMI NAND on MX28 with DT.with   Huang Shijie
• [GIT PULL] ARM: OMAP: clock, powerdomain, clockdomain, hwmod fixes for early v3.4-rc   Paul Walmsley
• [RFC PATCH 0/8] Fix restart_block syscall restarting for 3.5   Will Deacon
• [RFC PATCH 1/8] Revert "arm: remove unused restart trampoline"   Will Deacon
• [RFC PATCH 2/8] Revert "arm: new way of handling ERESTART_RESTARTBLOCK"   Will Deacon
• [RFC PATCH 3/8] audit: arm: only allow syscall auditing for pure EABI userspace   Will Deacon
• [RFC PATCH 4/8] ARM: entry: don't bother with syscall tracing on ret_from_fork path   Will Deacon
• [RFC PATCH 5/8] ARM: audit: move syscall auditing until after ptrace SIGTRAP handling   Will Deacon
• [RFC PATCH 6/8] ARM: ptrace: provide separate functions for tracing syscall {entry, exit}   Will Deacon
• [RFC PATCH 7/8] ARM: signal: perform restart_block system call restarting in the kernel   Will Deacon
• [RFC PATCH 8/8] Revert "Revert "arm: remove unused restart trampoline""   Will Deacon
• [PATCH v3] ARM: Orion5x - Restore parts of io.h, with rework   Andrew Lunn
• [PATCH 0/2] Use architected timers for delay loop   Will Deacon
• [PATCH 1/2] ARM: arch timer: implement read_current_timer and get_cycles   Will Deacon
• [PATCH 2/2] ARM: delay: allow timer-based delay implementation to be selected   Will Deacon
• [PATCH 0/2] Implement ticket spinlocks for ARM   Will Deacon
• [PATCH 1/2] ARM: spinlock: use ticket algorithm for ARMv6+ locking implementation   Will Deacon
• [PATCH 2/2] ARM: rwlocks: remove unused branch labels from trylock routines   Will Deacon
• MMC: commit dba3c29 ruins mmc card data on beagle-xm revB   T Krishnamoorthy, Balaji
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: reimplement the OMAP PRCM I/O chain code for 3.6   Paul Walmsley
• [PATCH 2/2] MFD: mc13xxx workaround SPI hardware bug on i.Mx   Fabio Estevam
• [PATCH 06/11] gpio/omap: add clk_prepare and clk_unprepare   Pankaj Jangra
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Mark Brown
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Mitch Bradley
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• i.MX28 die temperature   Marek Vasut
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Stephen Warren
• [PATCH 01/11] ARM: omap: clk: add clk_prepare and clk_unprepare   Pankaj Jangra
• [PATCH 02/11] mmc: omap: add clk_prepare and clk_unprepare   S, Venkatraman
• [PATCH v3] ARM: Orion5x - Restore parts of io.h, with rework   Rob Herring
• [PATCH 02/11] mmc: omap: add clk_prepare and clk_unprepare   Paul Walmsley
• RF231 transceiver on at91sam9g20ek board   Arnd Bergmann
• [PATCH 07/11] w1: omap_hdq: add clk_prepare and clk_unprepare   Paul Walmsley
• [PATCHv5 5/6] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Paul Walmsley
• [PATCH 08/11] crypto: omap: add clk_prepare and clk_unprepare   Paul Walmsley
• [PATCH] gpio/mxc: use the edge_sel feature if available   Benoît Thébaudeau
• [PATCH 04/11] mfd: omap-usb: add clk_prepare and clk_unprepare   Paul Walmsley
• [PATCH 06/11] gpio/omap: add clk_prepare and clk_unprepare   Paul Walmsley
• [RFC PATCH v2] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Brian Norris
• [RFC PATCH 0/8] Fix restart_block syscall restarting for 3.5   Al Viro
• [PATCH 1/2] ARM: spinlock: use ticket algorithm for ARMv6+ locking implementation   Nicolas Pitre
• [PATCH 2/2] ARM: rwlocks: remove unused branch labels from trylock routines   Nicolas Pitre
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [GIT PULL] Integrator common clock   Linus Walleij
• [PATCH 0/2] Use architected timers for delay loop   Russell King - ARM Linux
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Russell King - ARM Linux
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Stephen Warren
• [PATCH 2/3] ARM: dt: tegra: ventana: add regulators   Stephen Warren
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [PATCH] mtd/m25p80: add device tree probe support   Marek Vasut
• [RFC PATCH v2 1/2] drivers: misc: omap: add a new driver for ocp2scp   Greg KH
• [PATCH 02/12] arm: remove km_type definitions   Cong Wang
• [PATCH] usb: gadget: pxa25x_udc: compile fix   Eric Miao
• Current state of AM33xx patches   Domenico Andreoli
• [PATCH v3 0/7] ARM: at91: add sparse irq support and introduce aic5   ludovic.desroches at atmel.com
• [PATCH v3 1/7] ARM: at91: aic add dt support for external irqs   ludovic.desroches at atmel.com
• [PATCH v3 2/7] ARM: at91: add of irq priorities support   ludovic.desroches at atmel.com
• [PATCH v3 3/7] ARM: at91: remove static irq priorities for sam9x5   ludovic.desroches at atmel.com
• [PATCH v3 4/7] ARM: at91: at91 based machines specify their own irq handler at run time   ludovic.desroches at atmel.com
• [PATCH v3 5/7] ARM: at91: sparse irq support   ludovic.desroches at atmel.com
• [PATCH v3 6/7] ARM: at91: remove mach/irqs.h   ludovic.desroches at atmel.com
• [PATCH v3 7/7] ARM: at91: add AIC5 support   ludovic.desroches at atmel.com
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Marc Dietrich
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 1/7] ARM: mxs: Move SSP register definitions into separate file   Marek Vasut
• [PATCH 2/7] ARM: mxs: Rename IMX2[38]_MMC to IMX2[38]_SSP   Marek Vasut
• [PATCH 3/7] ARM: mxs: Add necessary bits into mxs-spi.h   Marek Vasut
• [PATCH 4/7] ARM: mxs: Add SPI clock into clk framwork   Marek Vasut
• [PATCH 5/7] ARM: mxs: Pull out parts shared between MMC and SPI   Marek Vasut
• [PATCH 6/7] ARM: mxs: Pull out the SSP clock configuration function   Marek Vasut
• [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH] ARM: mx28: Add LCD pinmux   Marek Vasut
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH 1/1] ARM: OMAP: omap2plus_defconfig: Enable EXT4 support   Javier Martinez Canillas
• [GIT PULL] omap fixes for v3.5-rc3   Olof Johansson
• [GIT PULL] ARM: OMAP2+: clock/hwmod/warning fixes for 3.5-rc   Olof Johansson
• [GIT PULL] ARM: SoC fixes   Olof Johansson
• [PATCH 1/1] ARM: only call smp_send_stop() on SMP   Javier Martinez Canillas
• [PATCH] ARM: mx28: Add LCD pinmux   Fabio Estevam
• [PATCH 1/1] ARM: only call smp_send_stop() on SMP   Russell King - ARM Linux
• [PATCH 1/1] ARM: only call smp_send_stop() on SMP   Javier Martinez Canillas
• [PATCH 1/1 v2] ARM: only call smp_send_stop() on SMP   Javier Martinez Canillas
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Mark Brown
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Marc Dietrich
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Mark Brown
• [PATCH] ARM: mx28: Add LCD pinmux   Marek Vasut
• [PATCH] ARM: mx28: Add LCD pinmux   Fabio Estevam
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Marc Dietrich
• [PATCH] ARM: mx28: Add LCD pinmux   Marek Vasut
• [PATCH 0/7] ARM: LPC32xx specific updates for next, second set   Roland Stigge
• [PATCH 1/7] ARM: LPC32xx: Init MMC via clock   Roland Stigge
• [PATCH 2/7] ARM: LPC32xx: Add further bits to MMC init   Roland Stigge
• [PATCH 3/7] ARM: LPC32xx: Remove wrong re-initialization of MMC clock register   Roland Stigge
• [PATCH 4/7] ARM: LPC32xx: Update DTS file for EA3250 board   Roland Stigge
• [PATCH 5/7] ARM: LPC32xx: Defconfig update   Roland Stigge
• [PATCH 6/7] ARM: LPC32xx: Cleanup USB clock init   Roland Stigge
• [PATCH 7/7] ARM: LPC32xx: Remove USB and I2C init from phy3250.c   Roland Stigge
• [PATCH 4/7] ARM: LPC32xx: Update DTS file for EA3250 board   Alexandre Pereira da Silva
• [PATCH 5/7] ARM: LPC32xx: Defconfig update   Alexandre Pereira da Silva
• [PATCH RESEND v4] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH v6] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• Dove clock support   Simon Baatz
• imx27_visstrim_m10: spot the mistake   Russell King - ARM Linux
• [GIT PULL] Fixes (for v3.5 if possible) for Renesas ARM-based platforms   Rafael J. Wysocki
• [GIT PULL] Fixes (for v3.5 if possible) for Renesas ARM-based platforms   Olof Johansson
• [PATCH v3 2/7] ARM: at91: add of irq priorities support   Rob Herring
• [PATCH 1/1 v2] ARM: only call smp_send_stop() on SMP   Shawn Guo
• [PATCH v6 00/14] add imx usb driver based on Greg next tree   Richard Zhao
• [PATCH v7] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v6 07/14] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers   Richard Zhao
• [PATCH] ARM: imx27_visstrim_m10: Do not include <asm/system.h>   Fabio Estevam
• [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc   Shawn Guo
• [PATCH v5 0/7] cleanup imx5 idle, add imx5/6 cpuidle   Rob Lee
• [PATCH 02/11] mmc: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 07/11] w1: omap_hdq: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 08/11] crypto: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 06/11] gpio/omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 02/11] mmc: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 01/11] ARM: omap: clk: add clk_prepare and clk_unprepare   Rajendra Nayak
• [RFC PATCH v2 1/2] drivers: misc: omap: add a new driver for ocp2scp   ABRAHAM, KISHON VIJAY
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Tomi Valkeinen
• [PATCH 06/11] gpio/omap: add clk_prepare and clk_unprepare   DebBarma, Tarun Kanti
• [GIT PULL] gpio/omap: cleanups for v3.5   NeilBrown
• [PATCH 02/11] mmc: omap: add clk_prepare and clk_unprepare   Paul Walmsley
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Laxman Dewangan
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• imx27_visstrim_m10: spot the mistake   Sascha Hauer
• [PATCH v7 00/14] add imx usb driver based on Greg next tree   Richard Zhao
• [PATCH v7 01/14] usb: chipidea: remove unneeded NULL check   Richard Zhao
• [PATCH v7 02/14] usb: chipidea: drop useless arch-check   Richard Zhao
• [PATCH v7 03/14] usb: chipidea: msm: add missing section annotation   Richard Zhao
• [PATCH v7 04/14] usb: chipidea: msm: add remove method   Richard Zhao
• [PATCH v7 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data   Richard Zhao
• [PATCH v7 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci   Richard Zhao
• [PATCH v7 07/14] USB: Chipidea: add unified ci13xxx_{add, remove}_device for platform drivers   Richard Zhao
• [PATCH v7 08/14] USB: Chipidea: add ci13xxx device id management   Richard Zhao
• [PATCH v7 09/14] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig   Richard Zhao
• [PATCH v7 10/14] usb: otg: add notify_connect/notify_disconnect callback   Richard Zhao
• [PATCH v7 11/14] USB: notify phy when root hub port connect change   Richard Zhao
• [PATCH v7 12/14] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v7 13/14] usb: otg: add basic mxs phy driver support   Richard Zhao
• [PATCH v7 14/14] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 06/11] gpio/omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• imx27_visstrim_m10: spot the mistake   javier Martin
• [PATCH v6] input: keyboard: Add keys driver for the LPC32xx SoC   Dmitry Torokhov
• [PATCH 02/11] mmc: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH] ARM: tegra: Remove second instance of uart clk   Prashant Gaikwad
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Tomi Valkeinen
• [GIT PULL] gpio/omap: cleanups for v3.5   DebBarma, Tarun Kanti
• [PATCH 1/1 v2] ARM: only call smp_send_stop() on SMP   Javier Martinez Canillas
• [PATCH v3 0/7] ARM: at91: add sparse irq support and introduce aic5   Nicolas Ferre
• [GIT PULL] DMA-mapping fixes for v3.5-rc5   Marek Szyprowski
• [PATCH v3 1/7] ARM: at91: aic add dt support for external irqs   Nicolas Ferre
• [PATCH v3 2/7] ARM: at91: add of irq priorities support   Nicolas Ferre
• [PATCH v3 3/7] ARM: at91: remove static irq priorities for sam9x5   Nicolas Ferre
• [PATCH v3 4/7] ARM: at91: at91 based machines specify their own irq handler at run time   Nicolas Ferre
• [PATCH v3 5/7] ARM: at91: sparse irq support   Nicolas Ferre
• [PATCH v3 6/7] ARM: at91: remove mach/irqs.h   Nicolas Ferre
• [PATCH v3 7/7] ARM: at91: add AIC5 support   Nicolas Ferre
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Mark Brown
• [PATCHv4 0/2] ARM: replace custom consistent dma region with vmalloc   Marek Szyprowski
• [PATCHv4 1/2] mm: vmalloc: use const void * for caller argument   Marek Szyprowski
• [PATCHv4 2/2] ARM: dma-mapping: remove custom consistent dma region   Marek Szyprowski
• [PATCH 1/1 v2] ARM: only call smp_send_stop() on SMP   Russell King - ARM Linux
• [PATCH 04/11] mfd: omap-usb: add clk_prepare and clk_unprepare   Munegowda, Keshava
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Marc Kleine-Budde
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Marc Kleine-Budde
• [RFC PATCH 0/8] Fix restart_block syscall restarting for 3.5   Will Deacon
• pm runtime and system suspend resume   chao xie
• [PATCH v6] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH v7] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH 1/2] ARM: spinlock: use ticket algorithm for ARMv6+ locking implementation   Will Deacon
• [PATCH 2/2] ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0   Felipe Balbi
• [PATCH v7 08/14] USB: Chipidea: add ci13xxx device id management   Marc Kleine-Budde
• [PATCHv9 3/8] I2C: OMAP: use devm_* functions   Felipe Balbi
• [PATCH 0/2] Use architected timers for delay loop   Will Deacon
• [PATCH v7 08/14] USB: Chipidea: add ci13xxx device id management   Richard Zhao
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH v11 1/4] MTD: at91: extract hw ecc initialization to one function   Josh Wu
• [PATCH v11 2/4] MTD: at91: add dt parameters for Atmel PMECC   Josh Wu
• [PATCH v11 3/4] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Josh Wu
• [PATCH v11 4/4] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• ARM: s3c2410: remove dead mach-s3c2410 directory   Paul Bolle
• [RFC PATCH v2] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Josh Wu
• [PATCH v7 08/14] USB: Chipidea: add ci13xxx device id management   Marc Kleine-Budde
• ARM: BAST: update MAINTAINERS entry   Paul Bolle
• [PATCH 06/11] gpio/omap: add clk_prepare and clk_unprepare   DebBarma, Tarun Kanti
• [PATCH 1/2] ARM: OMAP2+: fix naming collision of variable nr_irqs   Venkatraman S
• [PATCH 2/2] ARM: OMAP2+: use proper type for keymap data in boardfiles.   Venkatraman S
• [PATCHv9 3/8] I2C: OMAP: use devm_* functions   Shubhrajyoti Datta
• [PATCH v11 4/4] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Richard Genoud
• [PATCH 1/1 v2] ARM: only call smp_send_stop() on SMP   Javier Martinez Canillas
• [PATCH v7 14/14] usb: chipidea: add imx platform driver   Marc Kleine-Budde
• [PATCH v11 2/4] MTD: at91: add dt parameters for Atmel PMECC   Richard Genoud
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Marc Dietrich
• [PATCH 1/2] ARM: OMAP2+: Fix MUSB ifdefs for platform init code   Tony Lindgren
• [PATCH 1/2] ARM: OMAP2+: Fix MUSB ifdefs for platform init code   Felipe Balbi
• [PATCH] ARM: omap4: Fix standalone OMAP4 build break   Tony Lindgren
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Thierry Reding
• [PATCHv9 0/7] I2C cleanups   Shubhrajyoti D
• [PATCHv10 1/7] I2C: OMAP: I2C register restore only if context is lost   Shubhrajyoti D
• [PATCHv10 2/7] I2C: OMAP: Optimise the remove code   Shubhrajyoti D
• [PATCHv10 3/7] I2C: OMAP: Use SET_RUNTIME_PM_OPS   Shubhrajyoti D
• [PATCHv10 4/7] I2C: OMAP: Do not initialise the completion everytime   Shubhrajyoti D
• [PATCHv10 5/7] I2C: OMAP: Remove the definition of SYSS_RESETDONE_MASK   Shubhrajyoti D
• [PATCHv10 6/7] I2C: OMAP: Correct I2C revision for OMAP3   Shubhrajyoti D
• [PATCHv10 7/7] I2C: OMAP: Recover from Bus Busy condition   Shubhrajyoti D
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Russell King - ARM Linux
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Russell King - ARM Linux
• [PATCH] serial/amba-pl011: move custom pin control to driver   viresh kumar
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Rajendra Nayak
• [RFC PATCH v2 1/2] drivers: misc: omap: add a new driver for ocp2scp   Felipe Balbi
• [PATCHv10 1/7] I2C: OMAP: I2C register restore only if context is lost   Felipe Balbi
• [PATCHv10 4/7] I2C: OMAP: Do not initialise the completion everytime   Felipe Balbi
• [PATCHv10 5/7] I2C: OMAP: Remove the definition of SYSS_RESETDONE_MASK   Felipe Balbi
• [PATCHv10 6/7] I2C: OMAP: Correct I2C revision for OMAP3   Felipe Balbi
• [PATCH] serial/amba-pl011: move custom pin control to driver   Fabio Estevam
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Tomi Valkeinen
• [PATCH] serial/amba-pl011: move custom pin control to driver   viresh kumar
• [PATCH v7 04/14] usb: chipidea: msm: add remove method   ABRAHAM, KISHON VIJAY
• [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28   Fabio Estevam
• [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH v7 04/14] usb: chipidea: msm: add remove method   Marek Vasut
• [PATCH v7 04/14] usb: chipidea: msm: add remove method   ABRAHAM, KISHON VIJAY
• [PATCH v7 04/14] usb: chipidea: msm: add remove method   Marek Vasut
• [PATCH v7 04/14] usb: chipidea: msm: add remove method   Felipe Balbi
• [PATCH v7 04/14] usb: chipidea: msm: add remove method   Marek Vasut
• pm runtime and system suspend resume   Alan Stern
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Stephen Warren
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Laxman Dewangan
• [PATCH v4 1/3] ARM: OMAP2+: nand: unify init functions   Jon Hunter
• [GIT PULL] ARM: OMAP: HDQ: convert HDQ to runtime PM   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: PRCM/hwmod: reimplement the OMAP PRCM I/O chain code for 3.6   Tony Lindgren
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Stephen Warren
• [PATCH] mtd/m25p80: add device tree probe support   Shawn Guo
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Stephen Warren
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Shawn Guo
• [PATCH 1/2] ARM:MX28: Add additionnal muxing options to iMX28 DTSI   Shawn Guo
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Shawn Guo
• [PATCH] mtd/m25p80: add device tree probe support   Marek Vasut
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH v4] ARM: mx23: Add initial support for olinuxino board   Shawn Guo
• ARM: s3c2410: remove dead mach-s3c2410 directory   Heiko Stübner
• [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number   Shawn Guo
• [PATCH v4 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Jon Hunter
• [PATCH] mtd/m25p80: add device tree probe support   Shawn Guo
• [PATCH v6 00/14] add imx usb driver based on Greg next tree   Fabio Estevam
• [PATCH v4] ARM: mx23: Add initial support for olinuxino board   Fabio Estevam
• [RFC PATCH v2 1/2] drivers: misc: omap: add a new driver for ocp2scp   Arnd Bergmann
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Vinod Koul
• [PATCH] mtd/m25p80: add device tree probe support   Marek Vasut
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH v5 1/7] ARM: davinci, cp_intc: Add irq domain support   Sekhar Nori
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Vinod Koul
• [PATCH V2] ARM: OMAP4470: Fix OMAP4470 boot failure   Jon Hunter
• Current state of AM33xx patches   Daniel Mack
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Greg Kroah-Hartman
• [PATCH] ARM: tegra: Remove second instance of uart clk   Stephen Warren
• [PATCH] serial/amba-pl011: move custom pin control to driver   Linus Walleij
• [PATCH] ARM: Delete asm/system.h   David Howells
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• Panda ES board hang when using GPIO as interrupt   Franky Lin
• [PATCH 0/2] Use architected timers for delay loop   Stephen Boyd
• [PATCH 1/2] ARM: arch timer: implement read_current_timer and get_cycles   Stephen Boyd
• [PATCH 2/2] ARM: delay: allow timer-based delay implementation to be selected   Stephen Boyd
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Mark Brown
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Stephen Warren
• [PATCH] clk: mxs: mx23, mx28: fix clock lookup after freeing init memory   Turquette, Mike
• pm runtime and system suspend resume   chao xie
• linux-next: adding the common clk tree   Mike Turquette
• [GIT PULL] Integrator common clock   Turquette, Mike
• [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios   Chen Peter-B29397
• [PATCH v4] ARM: mx23: Add initial support for olinuxino board   Shawn Guo
• [PATCH v6 00/14] add imx usb driver based on Greg next tree   Shawn Guo
• [PATCH] ARM: tegra: Remove second instance of uart clk   Prashant G
• [PATCH] ARM: mx28: Add LCD pinmux   Shawn Guo
• linux-next: adding the common clk tree   Stephen Rothwell
• [PATCH] gpio: samsung: add flags specifier to device-tree binding   Olof Johansson
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Rajendra Nayak
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Rajendra Nayak
• [PATCH v11 4/4] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH V2] ASoC: tlv320aic3x: Fix codec pll configure bug   Hebbar, Gururaja
• [PATCH v11 2/4] MTD: at91: add dt parameters for Atmel PMECC   Josh Wu
• [PATCHv10 1/7] I2C: OMAP: I2C register restore only if context is lost   Shubhrajyoti
• [PATCH] davinci:mcasp: Fix codec pll configure bug   Hebbar, Gururaja
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Laxman Dewangan
• [PATCH 1/7] ARM: mxs: Move SSP register definitions into separate file   Shawn Guo
• [PATCH v5 1/7] ARM: davinci, cp_intc: Add irq domain support   Heiko Schocher
• [PATCH 4/7] ARM: mxs: Add SPI clock into clk framwork   Shawn Guo
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Tomi Valkeinen
• [PATCH] ARM: EXYNOS: Remove the L2 cache latency setting for EXYNOS5   Joonyoung Shim
• Panda ES board hang when using GPIO as interrupt   DebBarma, Tarun Kanti
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28   Shawn Guo
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• i.MX28 die temperature   Juergen Beisert
• [PATCH] mtd/m25p80: add device tree probe support   Shawn Guo
• [PATCH v4] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Gregory Clement
• [PATCH v4 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Gregory Clement
• [PATCH v4 2/9] arm: mach-mvebu: add header   Gregory Clement
• [PATCH v4 3/9] arm: mach-mvebu: add source files   Gregory Clement
• [PATCH v4 4/9] arm: mach-mvebu: add support for Armada 370 and Armada XP with DT   Gregory Clement
• [PATCH v4 5/9] arm: mach-mvebu: add documentation for new device tree bindings   Gregory Clement
• [PATCH v4 6/9] arm: mach-mvebu: add defconfig   Gregory Clement
• [PATCH v4 7/9] arm: mach-mvebu: add compilation/configuration change   Gregory Clement
• [PATCH v4 8/9] arm: mach-mvebu: add entry to MAINTAINERS   Gregory Clement
• [PATCH v4 9/9] ARM: mvebu: MPIC: read number of interrupts from control register   Gregory Clement
• [PATCH v4 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [PATCH v4 1/3] ARM: OMAP2+: nand: unify init functions   Mohammed, Afzal
• [PATCH v3] rtc: stmp3xxx: Add simple binding for the stmp3xxx-rtc   Shawn Guo
• [PATCH] mmc: mxs-mmc: enable regulator for mmc slot   Shawn Guo
• [PATCH 0/3] fec driver updates   Shawn Guo
• [PATCH 1/3] net: fec: reset phy after pinctrl setup   Shawn Guo
• [PATCH 2/3] net: fec: enable regulator for fec phy   Shawn Guo
• [PATCH 3/3] net: fec: add phy-reset-interval for device tree probe   Shawn Guo
• [PATCH v4 3/9] arm: mach-mvebu: add source files   Andrew Lunn
• [PATCH 0/2] flexcan driver updates   Shawn Guo
• [PATCH 1/2] net: flexcan: clock-frequency is optional for device tree probe   Shawn Guo
• [PATCH 2/2] net: flexcan: add transceiver switch gpio support   Shawn Guo
• [PATCH 1/3] ARM: dt: tegra: seaboard: add regulators   Mark Brown
• [PATCH v4 5/9] arm: mach-mvebu: add documentation for new device tree bindings   Andrew Lunn
• [PATCH V2] ASoC: tlv320aic3x: Fix codec pll configure bug   Mark Brown
• Where to power on the wifi device before loading the driver.   Dong Aisheng
• [PATCH 0/4] pwm-mxs driver updates   Shawn Guo
• [PATCH 1/4] pwm: pwm-mxs: encode soc name in compatible string   Shawn Guo
• [PATCH 2/4] pwm: pwm-mxs: use global reset function stmp_reset_block   Shawn Guo
• [PATCH 3/4] pwm: pwm-mxs: use devm_* managed functions   Shawn Guo
• [PATCH 4/4] pwm: pwm-mxs: add pinctrl support   Shawn Guo
• [PATCH v6 00/13] GPMC driver conversion   Mohammed, Afzal
• [PATCH] clk: mxs: add clkdev lookup for pwm   Shawn Guo
• [PATCH V2] ASoC: tlv320aic3x: Fix codec pll configure bug   Prchal Jiří
• [PATCH 1/2] ARM:MX28: Add additionnal muxing options to iMX28 DTSI   Thomas Petazzoni
• [PATCH 0/2] simple device tree support for mxsfb   Shawn Guo
• [PATCH 1/2] video: mxsfb: move mxsfb.h into include/linux   Shawn Guo
• [PATCH 2/2] video: mxsfb: add simple device tree probe   Shawn Guo
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Marc Kleine-Budde
• [PATCH 08/14] mfd: Add IRQ domain support for the AB8500   Lee Jones
• [PATCH] ARM: mxs: use auxdata to attach mxsfb_platform_data   Shawn Guo
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Marc Kleine-Budde
• [PATCH 3/3] net: fec: add phy-reset-interval for device tree probe   Lothar Waßmann
• [PATCH v6 13/14] usb: otg: add basic mxs phy driver support   Alexander Shishkin
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Vinod Koul
• [PATCH 1/2] ARM:MX28: Add additionnal muxing options to iMX28 DTSI   Maxime Ripard
• [PATCH v4 5/9] arm: mach-mvebu: add documentation for new device tree bindings   Gregory CLEMENT
• [PATCH 2/4] pwm: pwm-mxs: use global reset function stmp_reset_block   Thierry Reding
• [PATCH 2/4] pwm: pwm-mxs: use global reset function stmp_reset_block   Thierry Reding
• [PATCH v4 3/9] arm: mach-mvebu: add source files   Gregory CLEMENT
• [PATCH 5/7] ARM: OMAP2: Use hwmod to initialize mmc for 2420   Tony Lindgren
• [PATCH v4 3/9] arm: mach-mvebu: add source files   Andrew Lunn
• [PATCH] ARM: omap4: Fix standalone OMAP4 build break   Tony Lindgren
• [PATCH 0/2] Use architected timers for delay loop   Will Deacon
• [PATCH 1/2] ARM: arch timer: implement read_current_timer and get_cycles   Will Deacon
• [PATCH 08/11] crypto: omap: add clk_prepare and clk_unprepare   Paul Walmsley
• [PATCH v2 05/17] i2c: omap: split out [XR]DR and [XR]RDY   Shubhrajyoti
• [PATCH 2/2] ARM: delay: allow timer-based delay implementation to be selected   Will Deacon
• [PATCH 1/2] ARM: OMAP2+: fix naming collision of variable nr_irqs   Tony Lindgren
• [PATCH v2 00/17] Big OMAP I2C Cleanup   Shubhrajyoti
• [PATCH 08/11] crypto: omap: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH 2/4] pwm: pwm-mxs: use global reset function stmp_reset_block   Shawn Guo
• [PATCHv8 03/13] I2C: OMAP: Remove reset at init   Tony Lindgren
• [PATCH 3/3] net: fec: add phy-reset-interval for device tree probe   Shawn Guo
• [RFC PATCH v2 03/11] mfd: omap: control: core system control driver   Tony Lindgren
• [PATCHv10 1/7] I2C: OMAP: I2C register restore only if context is lost   Shubhrajyoti
• [PATCH] OMAP7XX: Remove omap730.h and omap850.h   Tony Lindgren
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Shawn Guo
• [PATCH 1/2] ARM:MX28: Add additionnal muxing options to iMX28 DTSI   Shawn Guo
• Current state of AM33xx patches   Sekhar Nori
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Marc Kleine-Budde
• [PATCH] mtd/m25p80: add device tree probe support   Marek Vasut
• [PATCH] OMAP7XX: Remove omap730.h and omap850.h   Paul Bolle
• [PATCH 3/3] net: fec: add phy-reset-interval for device tree probe   Florian Fainelli
• [PATCH 1/2] ARM:MX28: Add additionnal muxing options to iMX28 DTSI   Shawn Guo
• [PATCH] drivers: usb/power: fix return value check of usb_get_phy   Kishon Vijay Abraham I
• [PATCH 3/3] net: fec: add phy-reset-interval for device tree probe   Shawn Guo
• [PATCH 4/7] ARM: mxs: Add SPI clock into clk framwork   Marek Vasut
• [PATCH] ARM: mx28: Add LCD pinmux   Marek Vasut
• [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH 4/7] ARM: mxs: Add SPI clock into clk framwork   Shawn Guo
• [PATCH v6 00/14] add imx usb driver based on Greg next tree   Marek Vasut
• [PATCH 4/7] ARM: mxs: Add SPI clock into clk framwork   Marek Vasut
• [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28   Shawn Guo
• [GIT PULL] OMAP PM: move SmartReflex driver to drivers/avs   Kevin Hilman
• [GIT PULL] OMAP3 PM: preformance enhancements   Kevin Hilman
• [GIT PULL] OMAP PM: misc. cleanup for v3.6   Kevin Hilman
• [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28   Marek Vasut
• [GIT PULL] OMAP: TWL IRQ dead code removal   Kevin Hilman
• [PATCH v4] ARM: mx23: Add initial support for olinuxino board   Shawn Guo
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Tony Lindgren
• [PATCH V3 1/1] ASoC: tlv320aic3x: Fix codec pll configure bug   Hebbar, Gururaja
• [PATCH 7/9] I2C: MV64XXX: Add Device Tree support   Ben Dooks
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Shawn Guo
• [PATCH V2] ASoC: tlv320aic3x: Fix codec pll configure bug   Hebbar, Gururaja
• [PATCH V2] ASoC: tlv320aic3x: Fix codec pll configure bug   Hebbar, Gururaja
• [PATCH 7/9] I2C: MV64XXX: Add Device Tree support   Andrew Lunn
• [PATCH 7/9] I2C: MV64XXX: Add Device Tree support   Ben Dooks
• [PATCH v11 4/4] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Richard Genoud
• pm runtime and system suspend resume   Alan Stern
• [RFC PATCH 0/8] Fix restart_block syscall restarting for 3.5   Will Deacon
• [PATCH v11 4/4] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller (REPORT SPAM)   William F.
• [PATCH v4 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Jon Hunter
• [PATCH v4 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH] MXS: Enable FLEXCAN for MXS/DT   Marek Vasut
• [PATCH 2/2] ARM: delay: allow timer-based delay implementation to be selected   Will Deacon
• [PATCH 2/2] ARM: delay: allow timer-based delay implementation to be selected   Rob Herring
• [PATCH v4 3/9] arm: mach-mvebu: add source files   Arnd Bergmann
• [PATCH 2/2] ARM: delay: allow timer-based delay implementation to be selected   Will Deacon
• try_to_freeze() called with IRQs disabled on ARM   Mandeep Singh Baines
• Where to power on the wifi device before loading the driver.   Stephen Warren
• [PATCH 0/2] flexcan driver updates   Oliver Hartkopp
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Stephen Warren
• try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Stephen Warren
• [PATCH] ARM: zImage: Allow DTB command line concatenation with ATAG_CMDLINE   Richard Genoud
• [PATCH 0/2] Use architected timers for delay loop   Stephen Boyd
• [PATCH 1/2] ARM: arch timer: implement read_current_timer and get_cycles   Stephen Boyd
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Vinod Koul
• Panda ES board hang when using GPIO as interrupt   Franky Lin
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Russell King - ARM Linux
• i.MX28 die temperature   Marek Vasut
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH 1/2] ARM: omap: fix typos related to OMAP330   Paul Bolle
• [PATCH 2/2] ARM: omap: remove unused cpu detection macros   Paul Bolle
• Where to power on the wifi device before loading the driver.   Rob Herring
• [PATCH v7 01/14] usb: chipidea: remove unneeded NULL check   Greg KH
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Greg KH
• [PATCH v7 01/14] usb: chipidea: remove unneeded NULL check   Marek Vasut
• [PATCH v7 02/14] usb: chipidea: drop useless arch-check   Marek Vasut
• [PATCH v7 03/14] usb: chipidea: msm: add missing section annotation   Marek Vasut
• [PATCH v7 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data   Marek Vasut
• [PATCH v7 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci   Marek Vasut
• [PATCH v7 09/14] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig   Marek Vasut
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• Where to power on the wifi device before loading the driver.   Stephen Warren
• [PATCH] ARM: sa1100: fix build failure on missing IOMEM   Paul Gortmaker
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Mark Brown
• linux-next: adding the common clk tree   Mike Turquette
• [PATCH] ARM: sa1100: fix jornada720 build failure on missing IOMEM   Paul Gortmaker
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [PATCH] ARM: sa1100: fix build failure on missing IOMEM   Russell King - ARM Linux
• [PATCH] ARM: EXYNOS: Remove the L2 cache latency setting for EXYNOS5   Boojin Kim
• [GIT PULL] clk: fixes for 3.5-rc5   Mike Turquette
• [PATCH 0/2] flexcan driver updates   Shawn Guo
• [PATCH V2] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Mike Turquette
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 07/11] I2C: OMAP: Handle error check for pm runtime   Kevin Hilman
• [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error   Kevin Hilman
• [PATCHv4 2/2] ARM: dma-mapping: remove custom consistent dma region   Minchan Kim
• [PATCH 2/2] ARM: delay: allow timer-based delay implementation to be selected   Stephen Boyd
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Shawn Guo
• Where to power on the wifi device before loading the driver.   Dong Aisheng
• [PATCH] ARM: sa1100: fix build failure on missing IOMEM   Paul Gortmaker
• Where to power on the wifi device before loading the driver.   Dong Aisheng
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• Panda ES board hang when using GPIO as interrupt   Kevin Hilman
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Tomi Valkeinen
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• usb, davinci: usb 2.0 problem on an am1808 based board   Heiko Schocher
• [PATCH v6] ARM: imx: Add basic imx6q thermal driver   Robert Lee
• [PATCH v6] ARM: imx: Add basic imx6q thermal driver   Robert Lee
• [PATCH] ARM: EXYNOS: Remove the L2 cache latency setting for EXYNOS5   Joonyoung Shim
• [PATCH 05/11] OMAPDSS: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Josh Wu
• how to specify dma_mask and coherent_dma_mask in hwmod   N, Mugunthan V
• [PATCH v7 08/14] USB: Chipidea: add ci13xxx device id management   Richard Zhao
• [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error   Shubhrajyoti Datta
• [PATCH v2 07/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v7 14/14] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH v7 01/14] usb: chipidea: remove unneeded NULL check   Richard Zhao
• [PATCH v7 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data   Richard Zhao
• [PATCH v5 0/3] Prepare for GPMC driver conversion   Afzal Mohammed
• [PATCH v5 1/3] ARM: OMAP2+: nand: unify init functions   Afzal Mohammed
• [PATCH v5 2/3] ARM: OMAP2+: gpmc: handle additional timings   Afzal Mohammed
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Afzal Mohammed
• [PATCH v7 13/14] usb: otg: add basic mxs phy driver support   Richard Zhao
• [GIT PULL] i.MX cpuidle changes for 3.6   Sascha Hauer
• [PATCH v6 13/14] usb: otg: add basic mxs phy driver support   Richard Zhao
• [PATCH] ARM: mxc-rnga: fix data_present API   Herbert Xu
• [PATCH v4 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [PATCH] gpio/mxc: use the edge_sel feature if available   Sascha Hauer
• [PATCH 1/2] ARM: i.MX5x clocks: Add EPIT support   Alexander Shiyan
• [PATCH 2/2] ARM: i.MX51 iomux: added missing pin definitions   Alexander Shiyan
• i.MX28 die temperature   Jonathan Cameron
• Could resource_size can be used for IORESOURCE_IRQ in device tree?   zhangfei gao
• [PATCH] clk: mxs: fix ref_io clock definition   Maxime Ripard
• [PATCH v4 3/9] arm: mach-mvebu: add source files   Gregory CLEMENT
• [PATCH v3] ARM:MXS: Initial support for the Crystalfontz CFA-10036   Maxime Ripard
• [PATCH 1/2] ARM: dts: imx28: Add additionnal muxing options to iMX28 DTSI   Maxime Ripard
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Maxime Ripard
• Could resource_size can be used for IORESOURCE_IRQ in device tree?   Arnd Bergmann
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Nicolas Ferre
• [PATCH 1/2] net: flexcan: clock-frequency is optional for device tree probe   Marc Kleine-Budde
• [PATCH v2 0/3] Prepare for OMAP2+ movement to Common Clk   Rajendra Nayak
• [PATCH v2 1/3] ARM: omap: clk: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH v2 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• [PATCH v2 3/3] ARM: omap: clk: Remove all direct dereferencing of struct clk   Rajendra Nayak
• [PATCH 1/2] net: flexcan: clock-frequency is optional for device tree probe   Shawn Guo
• [PATCH v4] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Ben Dooks
• [PATCH 1/2] net: flexcan: clock-frequency is optional for device tree probe   Marc Kleine-Budde
• [PATCH 07/11] I2C: OMAP: Handle error check for pm runtime   Shubhrajyoti Datta
• [PATCH v4 3/9] arm: mach-mvebu: add source files   Ben Dooks
• [PATCH v4] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Gregory CLEMENT
• [PATCH v3] ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3   Fabio Porcedda
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• Could resource_size can be used for IORESOURCE_IRQ in device tree?   zhangfei gao
• [PATCH v11 1/4] MTD: at91: extract hw ecc initialization to one function   Artem Bityutskiy
• [PATCH v11 3/4] MTD: nand: add return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.   Artem Bityutskiy
• [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• [PATCH 2/2] ARM: delay: allow timer-based delay implementation to be selected   Will Deacon
• [PATCH v7 14/14] usb: chipidea: add imx platform driver   Marc Kleine-Budde
• [PATCH v5 0/3] Prepare for GPMC driver conversion   Mohammed, Afzal
• [PATCH] pinctrl: Add one-register-per-pin type device tree based pinctrl driver   Tony Lindgren
• [PATCH v7] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• [PATCH v2] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH v2] clk: Add support for rate table based dividers   Marc Kleine-Budde
• [PATCH v2] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH v11 4/4] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH V2] ARM: dt: tegra: paz00: add regulators   Mark Brown
• [PATCH v3] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Richard Zhao
• [RFC 0/3] Add cyclic DMA support to OMAP DMA engine driver   Mark Brown
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Marc Kleine-Budde
• [GIT PULL] OMAP PM: move SmartReflex driver to drivers/avs   Tony Lindgren
• [PATCH V3 1/1] ASoC: tlv320aic3x: Fix codec pll configure bug   Mark Brown
• [PATCH 1/2] ARM: dts: imx28: Add additionnal muxing options to iMX28 DTSI   Marek Vasut
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Marek Vasut
• [PATCH v7 08/14] USB: Chipidea: add ci13xxx device id management   Marek Vasut
• [GIT PULL] OMAP3 PM: preformance enhancements   Tony Lindgren
• i.MX28 die temperature   Marek Vasut
• [PATCH v7 08/14] USB: Chipidea: add ci13xxx device id management   Marc Kleine-Budde
• i.MX28 die temperature   Jonathan Cameron
• Current state of AM33xx patches   Hiremath, Vaibhav
• Current state of AM33xx patches   Hiremath, Vaibhav
• [PATCH] MTD: LPC32xx SLC NAND driver: Add error handling to write function   Roland Stigge
• [PATCH v7] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH 0/3] usb: chipidea: fix error handling and add dr_role property   Marc Kleine-Budde
• [PATCH 1/3] usb: chipidea: pci: make platformdata static   Marc Kleine-Budde
• [PATCH 2/3] usb: chipidea: udc: fix error path in udc_start()   Marc Kleine-Budde
• [PATCH 3/3] usb: chipidea: ci13xxx-imx: add "dr_role" property to device tree bindings   Marc Kleine-Budde
• i.MX28 die temperature   Marek Vasut
• [PATCH v7] MTD: LPC32xx SLC NAND driver   Alexandre Pereira da Silva
• kernel boot stops with "zlib_deflate: version magic" , "zlib_inflate: version magic"   K K
• [PATCH v7] MTD: LPC32xx SLC NAND driver   Artem Bityutskiy
• i.MX28 die temperature   Juergen Beisert
• [GIT PULL] OMAP PM: misc. cleanup for v3.6   Tony Lindgren
• [GIT PULL] OMAP: TWL IRQ dead code removal   Tony Lindgren
• [PATCH v7 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci   Marc Kleine-Budde
• [PATCH 0/3] usb: chipidea: fix error handling and add dr_role property   Richard Zhao
• [PATCH 0/3] usb: chipidea: fix error handling and add dr_role property   Marc Kleine-Budde
• [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk   Laurent Pinchart
• [PATCH v3 0/4] DT clock bindings   Rob Herring
• [PATCH 0/3] usb: chipidea: fix error handling and add dr_role property   Marc Kleine-Budde
• [PATCH 2/2] ARM: omap: remove unused cpu detection macros   Tony Lindgren
• [PATCH 3/3] usb: chipidea: ci13xxx-imx: add "dr_role" property to device tree bindings   Richard Zhao
• [PATCH 3/3] usb: chipidea: ci13xxx-imx: add "dr_role" property to device tree bindings   Marc Kleine-Budde
• [PATCH] Atmel NAND ECC: Remove unaffected config option   Artem Bityutskiy
• Panda ES board hang when using GPIO as interrupt   DebBarma, Tarun Kanti
• [PATCH] clk: mxs: add clkdev lookup for pwm   Shawn Guo
• [PATCH v6] ARM: imx: Add basic imx6q thermal driver   Rob Lee
• [PATCH v2 2/4] pwm: pwm-mxs: use global reset function stmp_reset_block   Shawn Guo
• [PATCH] ARM: OMAP2+: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Tony Lindgren
• [PATCH v2 2/4] pwm: pwm-mxs: use global reset function stmp_reset_block   Thierry Reding
• [PATCH] ARM: sa1100: fix jornada720 build failure on missing IOMEM   Kristoffer Eriksson
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Vinod Koul
• [PATCH v2 0/5] fec driver updates   Shawn Guo
• [PATCH v2 1/5] net: fec: reset phy after pinctrl setup   Shawn Guo
• [PATCH v2 2/5] net: fec: enable regulator for fec phy   Shawn Guo
• [PATCH v2 3/5] net: fec: use managed function devm_gpio_request_one   Shawn Guo
• [PATCH v2 4/5] net: fec: phy-reset-gpios is optional   Shawn Guo
• [PATCH v2 5/5] net: fec: add phy-reset-duration for device tree probe   Shawn Guo
• [PATCH v6] ARM: imx: Add basic imx6q thermal driver   Sascha Hauer
• [RFC]Add initial support for Altera's SOCFPGA hardward   dinguyen at altera.com
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   dinguyen at altera.com
• [RFC PATCHv1 2/2] ARM: socfpga: Add board support for Altera's SOCFPGA Cyclone 5 HW   dinguyen at altera.com
• [PATCH] ARM: OMAP2+: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Hiremath, Vaibhav
• [PATCH 0/2] simple device tree support for mxsfb   Shawn Guo
• [PATCH v5] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Gregory Clement
• [PATCH v5 1/9] clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver   Gregory Clement
• [PATCH v5 2/9] arm: mach-mvebu: add header   Gregory Clement
• [PATCH v5 3/9] arm: mach-mvebu: add source files   Gregory Clement
• [PATCH v5 4/9] arm: mach-mvebu: add support for Armada 370 and Armada XP with DT   Gregory Clement
• [PATCH v5 5/9] arm: mach-mvebu: add documentation for new device tree bindings   Gregory Clement
• [PATCH v5 6/9] arm: mach-mvebu: add defconfig   Gregory Clement
• [PATCH v5 7/9] arm: mach-mvebu: add compilation/configuration change   Gregory Clement
• [PATCH v5 8/9] arm: mach-mvebu: add entry to MAINTAINERS   Gregory Clement
• [PATCH v5 9/9] ARM: mvebu: MPIC: read number of interrupts from control register   Gregory Clement
• [PATCH] ARM: OMAP2+: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Tony Lindgren
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   Thomas Petazzoni
• [RFC PATCHv1 2/2] ARM: socfpga: Add board support for Altera's SOCFPGA Cyclone 5 HW   Thomas Petazzoni
• linux-next: adding the common clk tree   Stephen Rothwell
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Tony Lindgren
• [PATCH V2] ARM: OMAP4470: Fix OMAP4470 boot failure   Tony Lindgren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Arnd Bergmann
• [PATCH v7] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH v7] MTD: LPC32xx SLC NAND driver   Roland Stigge
• [PATCH] ARM: OMAP2+: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Hiremath, Vaibhav
• [PATCH v5 3/9] arm: mach-mvebu: add source files   Andrew Lunn
• [PATCH 1/4] mtd: lpc32xx_slc: Select AMBA_PL08X in Kconfig   Roland Stigge
• [PATCH 2/4] mtd: lpc32xx_slc: Make wp gpio optional   Roland Stigge
• [PATCH 3/4] mtd: lpc32xx_slc: Use of_get_named_gpio()   Roland Stigge
• [PATCH 4/4] mtd: lpc32xx_slc: Make probe() return -EPROBE_DEFER if necessary   Roland Stigge
• [PATCH v5] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Ben Dooks
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Dave Martin
• [PATCH v5 4/9] arm: mach-mvebu: add support for Armada 370 and Armada XP with DT   Ben Dooks
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Dave Martin
• [PATCH] ARM: OMAP2+: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Tony Lindgren
• review comments   Ben Dooks
• [PATCH 1/3] arm: mach-mvebu: fixup style error in system-controller   Ben Dooks
• [PATCH 2/3] arm: mach-mvebu: check result of of_match_node()   Ben Dooks
• [PATCH 3/3] arm: mach-mvebu: system-controller only registers restart if device exists   Ben Dooks
• [PATCH v2] clk: Add support for rate table based dividers   Sascha Hauer
• [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk   Paul Walmsley
• [PATCH v6] ARM: imx: Add basic imx6q thermal driver   Rob Lee
• [PATCH V2] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [PATCH] clk: mxs: add clkdev lookup for pwm   Mike Turquette
• linux-next: adding the common clk tree   Mike Turquette
• [PATCH 1/2] mtd mxc_nand: use 32bit copy functions   Uwe Kleine-König
• Detecting support for trapping floating-point exceptions on ARM   Richard Henderson
• [PATCH v3 0/7] OMAP System Control Module   Konstantin Baydarov
• [PATCH v3 1/7] ARM: OMAP4: Remove un-used control module headers and defines.   Konstantin Baydarov
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Konstantin Baydarov
• [PATCH v3 3/7] OMAP2+: use control module mfd driver in omap_type   Konstantin Baydarov
• [PATCH v3 4/7] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Konstantin Baydarov
• [PATCH v3 5/7] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Konstantin Baydarov
• [PATCH v3 6/7] omap4: thermal: add basic CPU thermal zone   Konstantin Baydarov
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   Pavel Machek
• [PATCH v3 7/7] ARM: DT: Add support to system control module for OMAP4   Konstantin Baydarov
• [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk   Laurent Pinchart
• [PATCH v2] clk: Add support for rate table based dividers   Mike Turquette
• [PATCH] ARM: Orion: Fix Virtual/Physical mixup with watchdog   Jason Cooper
• Current state of AM33xx patches   Paul Walmsley
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   Thomas Petazzoni
• [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk   Laurent Pinchart
• [PATCH V2] ARM: dt: tegra: paz00: add regulators   Marc Dietrich
• [PATCH V2] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [PATCH V2] ARM: dt: tegra: paz00: add regulators   Marc Dietrich
• Current state of AM33xx patches   Hiremath, Vaibhav
• Current state of AM33xx patches   Paul Walmsley
• [PATCH 1/4] mtd: lpc32xx_slc: Select AMBA_PL08X in Kconfig   Russell King - ARM Linux
• Detecting support for trapping floating-point exceptions on ARM   Joseph S. Myers
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Russell King - ARM Linux
• [PATCH 3/3] arm: mach-mvebu: system-controller only registers restart if device exists   Russell King - ARM Linux
• Current state of AM33xx patches   Hiremath, Vaibhav
• [PATCH 1/4] mtd: lpc32xx_slc: Select AMBA_PL08X in Kconfig   Alexandre Pereira da Silva
• [PATCH 1/4] mtd: lpc32xx_slc: Select AMBA_PL08X in Kconfig   Russell King - ARM Linux
• Current state of AM33xx patches   Paul Walmsley
• commit "ARM: dma-mapping: remove custom consistent dma region"   Paul Gortmaker
• [PATCH 1/4] mtd: lpc32xx_slc: Select AMBA_PL08X in Kconfig   Alexandre Pereira da Silva
• [PATCH] rtc: rtc-mxc: fix irq enabled interrupts warning   Benoît Thébaudeau
• [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk   Laurent Pinchart
• [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk   Paul Walmsley
• Current state of AM33xx patches   Paul Walmsley
• [PATCH 0/3] ARM: OMAP2/3: DSS HWMOD fixes   Paul Walmsley
• [PATCH 00/11] Prepare for OMAP2+ movement to Common Clk   Laurent Pinchart
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   Pavel Machek
• [PATCH] ARM: imx: fix i.MX35 CPU architecture   Benoît Thébaudeau
• [PATCH] ARM: OMAP2+: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Hiremath, Vaibhav
• [PATCH v2] arm: omap3: am35x: Set proper powerdomain states   Paul Walmsley
• Current state of AM33xx patches   Hiremath, Vaibhav
• [RFC PATCHv1 2/2] ARM: socfpga: Add board support for Altera's SOCFPGA Cyclone 5 HW   Pavel Machek
• Current state of AM33xx patches   Paul Walmsley
• [PATCH v2 1/2] arm: omap3: am35x: Add Davinci EMAC/MDIO hwmod support   Paul Walmsley
• [PATCH v2 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC   Paul Walmsley
• [PATCH v2 1/2] arm: omap3: am35x: Add Davinci EMAC/MDIO hwmod support   Paul Walmsley
• Current state of AM33xx patches   Paul Walmsley
• [PATCH v10] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH v2 0/2] arm: omap3: am35x: Convert emac to hwmod & disable hlt when open   Paul Walmsley
• [PATCH V2] ARM: dt: tegra: paz00: add regulators   Marc Dietrich
• [PATCH v8] input: keyboard: Add keys driver for the LPC32xx SoC   Roland Stigge
• [PATCH RESEND] gpio: LPC32xx: Driver cleanup   Roland Stigge
• [PATCH RESEND] gpio: gpio-lpc32xx: Add gpio_to_irq mapping   Roland Stigge
• [RFC PATCHv1 2/2] ARM: socfpga: Add board support for Altera's SOCFPGA Cyclone 5 HW   Thomas Petazzoni
• [PATCH 0/8] ARM: LPC32xx specific updates for next, second set   Roland Stigge
• [PATCH 1/8] ARM: LPC32xx: Init MMC via clock   Roland Stigge
• [PATCH 2/8] ARM: LPC32xx: Add further bits to MMC init   Roland Stigge
• [PATCH 3/8] ARM: LPC32xx: Remove wrong re-initialization of MMC clock register   Roland Stigge
• [PATCH 4/8] ARM: LPC32xx: Update DTS file for EA3250 board   Roland Stigge
• [PATCH 5/8] ARM: LPC32xx: Defconfig update   Roland Stigge
• [PATCH 6/8] ARM: LPC32xx: Cleanup USB clock init   Roland Stigge
• [PATCH 7/8] ARM: LPC32xx: Remove USB and I2C init from phy3250.c   Roland Stigge
• [PATCH 8/8] ARM: LPC32xx: Remove unused gpios   Roland Stigge
• [PATCH 1/1] ARM: OMAP: omap2plus_defconfig: Enable EXT4 support   Javier Martinez Canillas
• [PATCH RESEND] gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available   Roland Stigge
• i.MX28 die temperature   Marek Vasut
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• [RFC PATCHv1 2/2] ARM: socfpga: Add board support for Altera's SOCFPGA Cyclone 5 HW   Pavel Machek
• Panda ES board hang when using GPIO as interrupt   Franky Lin
• Panda ES board hang when using GPIO as interrupt   Franky Lin
• [PATCH 0/3] OMAP: hwmod: reset API proposal   Omar Ramirez Luna
• [PATCH 3/6] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Omar Ramirez Luna
• [PATCH v7 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci   Richard Zhao
• [PATCH v3] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Russ Dill
• i.MX28 die temperature   Marek Vasut
• [PATCH 0/3 V1] add 88pm80x mfd driver   Qiao Zhou
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Qiao Zhou
• [PATCH 2/3] rtc: add rtc support to 88PM80X PMIC   Qiao Zhou
• [PATCH 3/3] input: add onkey support to 88PM80X PMIC   Qiao Zhou
• [PATCH] bindings: update imx and mxs #gpio-cells   Shawn Guo
• [PATCH v2 0/2] flexcan driver updates   Shawn Guo
• [PATCH v2 1/2] net: flexcan: clock-frequency is optional for device tree probe   Shawn Guo
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v2 2/2] video: mxsfb: add simple device tree probe   Shawn Guo
• [PATCH v8 00/14] add imx usb driver based on Greg next tree   Richard Zhao
• [PATCH v8 01/14] usb: chipidea: remove unneeded NULL check   Richard Zhao
• [PATCH v8 02/14] usb: chipidea: drop useless arch-check   Richard Zhao
• [PATCH v8 03/14] usb: chipidea: msm: add missing section annotation   Richard Zhao
• [PATCH v8 04/14] usb: chipidea: msm: add remove method   Richard Zhao
• [PATCH v8 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data   Richard Zhao
• [PATCH v8 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci   Richard Zhao
• [PATCH v8 07/14] USB: Chipidea: add unified ci13xxx_{add, remove}_device for platform drivers   Richard Zhao
• [PATCH v8 08/14] USB: Chipidea: add ci13xxx device id management   Richard Zhao
• [PATCH v8 09/14] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig   Richard Zhao
• [PATCH v8 10/14] usb: otg: add notify_connect/notify_disconnect callback   Richard Zhao
• [PATCH v8 11/14] USB: notify phy when root hub port connect change   Richard Zhao
• [PATCH v8 12/14] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v8 13/14] usb: otg: add basic mxs phy driver support   Richard Zhao
• [PATCH v8 14/14] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH 1/2] ARM: dts: imx28: Add additionnal muxing options to iMX28 DTSI   Shawn Guo
• [PATCH 2/2] ARM: MXS: Add Crystalfontz CFA-10036 DTS   Shawn Guo
• [PATCH 00/11] mxs dts updates   Shawn Guo
• [PATCH 01/11] ARM: dts: mxs: add comments for pinmux-ids   Shawn Guo
• [PATCH 02/11] ARM: dts: mxs: add hog-gpios for imx23-evk and imx28-evk   Shawn Guo
• [PATCH 03/11] ARM: dts: imx23-evk: updates for mmc device   Shawn Guo
• [PATCH 04/11] ARM: dts: imx23-evk: add auart device   Shawn Guo
• [PATCH 05/11] ARM: dts: imx28-evk: add vmmc-supply for mmc device   Shawn Guo
• [PATCH 06/11] ARM: dts: imx28-evk: add missing properties for fec   Shawn Guo
• [PATCH 07/11] ARM: dts: imx28-evk: add flexan devices   Shawn Guo
• [PATCH 08/11] ARM: dts: imx28-evk: add heartbeat gpio-leds   Shawn Guo
• [PATCH 09/11] ARM: dts: mxs: enable rtc for imx23 and imx28   Shawn Guo
• [PATCH 10/11] ARM: dts: mxs: add pwm-backlight for imx23-evk and imx28-evk   Shawn Guo
• [PATCH 11/11] ARM: dts: mxs: add lcd support for imx23-evk and imx28-evk   Shawn Guo
• [PATCH v2 0/5] fec driver updates   David Miller
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Nicolas Pitre
• [PATCH v3 0/7] OMAP System Control Module   Eduardo Valentin
• [PATCH v3 1/7] ARM: OMAP4: Remove un-used control module headers and defines.   Eduardo Valentin
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Eduardo Valentin
• [PATCH v3 4/7] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver   Eduardo Valentin
• [PATCH v3 5/7] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Eduardo Valentin
• [PATCH v3 6/7] omap4: thermal: add basic CPU thermal zone   Eduardo Valentin
• [linux-pm] [PATCH v3 6/7] omap4: thermal: add basic CPU thermal zone   R, Durgadoss
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Lothar Waßmann
• [linux-pm] [PATCH v3 6/7] omap4: thermal: add basic CPU thermal zone   Eduardo Valentin
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Kim, Jong-Sung
• [PATCH] bindings: update imx and mxs #gpio-cells   Hui Wang
• [PATCH v2] arm: omap3: am35x: Fix clockdomain dependencies   Paul Walmsley
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Kim, Jong-Sung
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Hui Wang
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Nicolas Pitre
• [PATCH v3 0/7] OMAP System Control Module   Valentin, Eduardo
• [PATCH v3 3/7] OMAP2+: use control module mfd driver in omap_type   Tony Lindgren
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH 1/1] ARM: OMAP: omap2plus_defconfig: Enable EXT4 support   Tony Lindgren
• [PATCH] ARM: i.MX SSI: Removed an unnecessary setting SSI_SCR_NET bit   Alexander Shiyan
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Kim, Jong-Sung
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Hui Wang
• [PATCH 1/1] ARM: only call smp_send_stop() on SMP   Pantelis Antoniou
• [PATCH] ARM: fiq: change FIQ_START to a variable   Shawn Guo
• [GIT PULL] omap fixes for v3.5-rc4   Tony Lindgren
• RF231 transceiver on at91sam9g20ek board   Alexander Smirnov
• i.MX28 die temperature   Jonathan Cameron
• [GIT PULL] ARM: OMAP AM35xx: some fixes for 3.6   Paul Walmsley
• [PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH v12 1/2] MTD: at91: add dt parameters for Atmel PMECC   Josh Wu
• [PATCH v12 2/2] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver   Nicolas Ferre
• [PATCH v12 1/2] MTD: at91: add dt parameters for Atmel PMECC   Josh Wu
• [PATCH v12 2/2] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Nicolas Ferre
• [PATCH] ARM: i.MX SSI: Removed an unnecessary setting SSI_SCR_NET bit   Lothar Waßmann
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Russell King - ARM Linux
• [GIT PULL] imx fixes for v3.5-rc (part 2)   Shawn Guo
• [PATCH 3/3] arm: mach-mvebu: system-controller only registers restart if device exists   Ben Dooks
• [PATCH v3 1/7] ARM: OMAP4: Remove un-used control module headers and defines.   Konstantin Baydarov
• [PATCH v3 0/2] OMAP:IOMMU:flush L1 and L2 caches   Gupta, Ramesh
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [PATCH v3 1/2] ARM: new cache maintenance api for iommu   Gupta, Ramesh
• [PATCH v3 2/2] OMAP:IOMMU:flush L1 and L2 caches   Gupta, Ramesh
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Konstantin Baydarov
• [PATCH] ARM: OMAP2PLUS: DSS: Disable LCD3 output when resetting DSS   Chandrabhanu Mahapatra
• [PATCH v3 1/7] ARM: OMAP4: Remove un-used control module headers and defines.   Valentin, Eduardo
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Valentin, Eduardo
• [PATCH 0/3] Add device tree support to AM33XX SoC   AnilKumar, Chimata
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Konstantin Baydarov
• [PATCH 3/3] arm: mach-mvebu: system-controller only registers restart if device exists   Russell King - ARM Linux
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Konstantin Baydarov
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Marc Kleine-Budde
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Marc Kleine-Budde
• [PATCH 0/6] Port Tegra to generic clk framework   Prashant Gaikwad
• [PATCH 1/6] ARM: tegra30: Separate out clk ops and clk data   Prashant Gaikwad
• [PATCH 2/6] ARM: tegra20: Separate out clk ops and clk data   Prashant Gaikwad
• [PATCH 3/6] ARM: tegra: Rename tegra20 clock file   Prashant Gaikwad
• [PATCH 4/6] ARM: tegra: Add clk_tegra structure and helper functions   Prashant Gaikwad
• [PATCH 5/6] ARM: tegra: Port tegra to generic clock framework   Prashant Gaikwad
• [PATCH 6/6] ARM: tegra: Remove duplicate code   Prashant Gaikwad
• [PATCH] ARM: mxs/tx28: fix odd include   Paul Bolle
• [PATCH] ARM: OMAP2: twl-common: fix compiler warnings   Tero Kristo
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Valentin, Eduardo
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Valentin, Eduardo
• [PATCH] ARM: imx: fix i.MX35 CPU architecture   Sascha Hauer
• [PATCH 1/1] ARM: only call smp_send_stop() on SMP   Russell King - ARM Linux
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Arnd Bergmann
• [PATCH v2 1/2] net: flexcan: clock-frequency is optional for device tree probe   Dong Aisheng
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Marc Kleine-Budde
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Dong Aisheng
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Dong Aisheng
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Mark Brown
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Dong Aisheng
• [PATCH v1 00/11] omap: musb: Add device tree support   Kishon Vijay Abraham I
• [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   Kishon Vijay Abraham I
• [PATCH v1 02/11] arm/dts: omap: Add omap-usb2 dt data   Kishon Vijay Abraham I
• [PATCH v1 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Kishon Vijay Abraham I
• [PATCH v1 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module   Kishon Vijay Abraham I
• [PATCH v1 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb   Kishon Vijay Abraham I
• [PATCH v1 06/11] arm/dts: Add twl6030-usb data   Kishon Vijay Abraham I
• [PATCH v1 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb   Kishon Vijay Abraham I
• [PATCH v1 08/11] arm/dts: Add twl4030-usb data   Kishon Vijay Abraham I
• [PATCH v1 09/11] drivers: usb: musb: Add device tree support for omap musb glue   Kishon Vijay Abraham I
• [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data   Kishon Vijay Abraham I
• [PATCH v1 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c   Kishon Vijay Abraham I
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH 2/4] ARM: OMAP2+: Move the stubbed prm and cm functions to prcm.c file and make them __weak.   R, Sricharan
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Dong Aisheng
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Marc Kleine-Budde
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Lothar Waßmann
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Kurt Van Dijck
• [PATCH v5] arm: Add basic support for new Marvell Armada 370 and Armada XP SoC   Lior Amsalem
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Marc Kleine-Budde
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Dong Aisheng
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Dong Aisheng
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Lothar Waßmann
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Lothar Waßmann
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Tony Lindgren
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Lothar Waßmann
• [GIT PULL] PWM subsystem   Stephen Rothwell
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Shawn Guo
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Dong Aisheng
• [PATCH v12 1/2] MTD: at91: add dt parameters for Atmel PMECC   Nicolas Ferre
• [PATCH v3 0/7] OMAP System Control Module   Valentin, Eduardo
• [PATCH v2 0/4] usb: chipidea: fix error handling and add dr_role property   Marc Kleine-Budde
• [PATCH v2 1/4] usb: chipidea: pci: make platformdata static   Marc Kleine-Budde
• [PATCH v2 2/4] usb: chipidea: udc: fix error path in udc_start()   Marc Kleine-Budde
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Marc Kleine-Budde
• [PATCH v2 4/4] ARM: dts: imx23,28: limit usb to host role   Marc Kleine-Budde
• [PATCH v2 1/4] usb: chipidea: pci: make platformdata static   Richard Zhao
• [RFC PATCH 0/2] OMAP2+: PANDA: Provide unique-ish MAC addresses for Ethernet and WLAN interfaces   Arnd Bergmann
• RF231 transceiver on at91sam9g20ek board   Arnd Bergmann
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Arnd Bergmann
• [PATCH] ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx   Hiremath, Vaibhav
• [RFC PATCH 0/2] OMAP2+: PANDA: Provide unique-ish MAC addresses for Ethernet and WLAN interfaces   Steven Rostedt
• [PATCH] ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx   Vaibhav Hiremath
• [RFC PATCH 0/2] OMAP2+: PANDA: Provide unique-ish MAC addresses for Ethernet and WLAN interfaces   "Andy Green (林安廸)"
• [PATCH 1 of 2] ARM: imx: make ehci power/oc polarities configurable   Benoît Thébaudeau
• [PATCH-V3 0/3] ARM: OMAP2+: Cleanup series in order to remove ARCH_OMAPx dependency   Vaibhav Hiremath
• [PATCH-V3 1/3] ARM: OMAP2+: CLEANUP: All OMAP2PLUS uses omap-device.o target so add one entry   Vaibhav Hiremath
• [PATCH-V3 2/3] ARM: OMAP2+: CLEANUP: Move omap3 dpll ops to dpll3xxx.c   Vaibhav Hiremath
• [PATCH-V3 3/3] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Vaibhav Hiremath
• [PATCH 2 of 2] ARM: imx: fix mx51 ehci setup errors   Benoît Thébaudeau
• [PATCH-V3 3/3] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Benoit Cousson
• RF231 transceiver on at91sam9g20ek board   Nicolas Ferre
• [PATCH] ARM: imx: fix i.MX35 CPU architecture   Benoît Thébaudeau
• Current state of AM33xx patches   Daniel Mack
• [PATCHv11 0/6] I2C cleanups   Shubhrajyoti D
• [PATCHv11 1/6] i2c: omap: Optimise the remove code   Shubhrajyoti D
• [PATCHv11 2/6] i2c: omap: Use SET_RUNTIME_PM_OPS   Shubhrajyoti D
• [PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime   Shubhrajyoti D
• [PATCHv11 4/6] i2c: omap: Remove the definition of SYSS_RESETDONE_MASK   Shubhrajyoti D
• [PATCHv11 5/6] i2c: omap: Correct I2C revision for OMAP3   Shubhrajyoti D
• [PATCHv11 6/6] i2c: omap: Recover from Bus Busy condition   Shubhrajyoti D
• [PATCH] ARM: OMAP2+: am33xx: Change cpu_is_am33xx to soc_is_am33xx   Vaibhav Hiremath
• how to specify dma_mask and coherent_dma_mask in hwmod   Bedia, Vaibhav
• [PATCH-V3 3/3] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Hiremath, Vaibhav
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• [PATCH-V3 3/3] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Hiremath, Vaibhav
• [PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• [PATCH-V3 3/3] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Benoit Cousson
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• i.MX28 die temperature   Marek Vasut
• How to use ARM ETM/ETB at linux?   Linus Walleij
• [PATCH] ARM: imx28: Add Power LED to the crystalfontz CFA-10036 board   Maxime Ripard
• [PATCH] ARM: OMAP2+: hwmod: Hook-up am33xx support in omap_hwmod framework   Vaibhav Hiremath
• [PATCH-V2 2/4] ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file   Hiremath, Vaibhav
• how to specify dma_mask and coherent_dma_mask in hwmod   Paul Walmsley
• [GIT PULL v2] ARM: OMAP AM35xx: some fixes for 3.6   Paul Walmsley
• how to specify dma_mask and coherent_dma_mask in hwmod   ABRAHAM, KISHON VIJAY
• how to specify dma_mask and coherent_dma_mask in hwmod   ABRAHAM, KISHON VIJAY
• kernel boot stops with "zlib_deflate: version magic" , "zlib_inflate: version magic"   Russell King - ARM Linux
• [PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime   ABRAHAM, KISHON VIJAY
• [PATCH] davinci_cpdma: include linux/module.h   Daniel Mack
• [PATCH] drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT   Kevin Hilman
• how to specify dma_mask and coherent_dma_mask in hwmod   Bedia, Vaibhav
• how to specify dma_mask and coherent_dma_mask in hwmod   Paul Walmsley
• how to specify dma_mask and coherent_dma_mask in hwmod   Bedia, Vaibhav
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Jon Hunter
• [PATCH] ARM: OMAP2+: fix CONFIG_CPU_IDLE dependency on CONFIG_PM   Kevin Hilman
• [PATCH] ARM: OMAP2+: do not allow SmartReflex to be built as a module   Kevin Hilman
• [PATCH 0/2] ARM: OMAP: few more PM fixes for v3.5-rc   Kevin Hilman
• [PATCH 1/2] ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure   Kevin Hilman
• [PATCH 2/2] ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabled   Kevin Hilman
• [PATCH] MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section   Kevin Hilman
• [PATCH 5/6] ARM: tegra: Port tegra to generic clock framework   Prashant G
• [PATCH 2/6] ARM: tegra20: Separate out clk ops and clk data   Stephen Warren
• [PATCH 0/6] Port Tegra to generic clk framework   Stephen Warren
• [PATCH] [RESEND] arm: limit memblock base address for early_pte_alloc   Nicolas Pitre
• [PATCH v5 3/9] arm: mach-mvebu: add source files   Nicolas Pitre
• [PATCH 4/6] ARM: tegra: Add clk_tegra structure and helper functions   Mike Turquette
• [PATCH 0/2] ARM: OMAP2+: GPMC: Show correct frequency for OneNAND devices using async mode   Jon Hunter
• [PATCH 1/2] ARM: OMAP2+: GPMC: Remove unused OneNAND get_freq() platform function   Jon Hunter
• [PATCH 2/2] ARM: OMAP2+: GPMC: Show correct frequency for OneNAND devices using async mode   Jon Hunter
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Jon Hunter
• [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11   H. Peter Anvin
• [PATCH] ARM: Orion: Fix WDT compile for Dove and MV78xx0   Andrew Lunn
• How to use ARM ETM/ETB at linux?   Arve Hjønnevåg
• [PATCH] ARM: Orion: Fix WDT compile for Dove and MV78xx0   Nicolas Pitre
• Panda ES board hang when using GPIO as interrupt   Franky Lin
• [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error   Kevin Hilman
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH] ARM: tegra: use of_default_bus_match_table   Stephen Warren
• Panda ES board hang when using GPIO as interrupt   Franky Lin
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• Panda ES board hang when using GPIO as interrupt   Franky Lin
• [PATCH v3] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Sarashetti, Mantesh
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• [GIT PULL] Samsung fixes-1 for v3.5   Kukjin Kim
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• [PATCH] davinci_cpdma: include linux/module.h   David Miller
• [PATCH] ARM: mxs/tx28: fix odd include   Shawn Guo
• Panda ES board hang when using GPIO as interrupt   Franky Lin
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Haojian Zhuang
• [PATCH] ARM: imx28: Add Power LED to the crystalfontz CFA-10036 board   Shawn Guo
• [PATCH 1/1] ARM: OMAP3: PM: don't explicitly enable the IO-chain interrupt   Javier Martinez Canillas
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Mark Brown
• [PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime   Zhang, Shijie
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Richard Zhao
• [PATCH 1/3] ARM: imx6q: add clocks for gpmi-nand   Shawn Guo
• [PATCH 2/6] ARM: tegra20: Separate out clk ops and clk data   Prashant G
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Shawn Guo
• [PATCH 1/3] ARM: imx6q: add clocks for gpmi-nand   Dong Aisheng
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Huang Shijie
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Qiao Zhou
• [PATCH 1/3] ARM: imx6q: add clocks for gpmi-nand   Huang Shijie
• [PATCH 1/3] ARM: imx6q: add clocks for gpmi-nand   Shawn Guo
• [PATCH 2/3] ARM: imx6q: add DT node for gpmi nand   Dong Aisheng
• [PATCH 2/3] ARM: imx6q: add DT node for gpmi nand   Huang Shijie
• How to use ARM ETM/ETB at linux?   Frank Li
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Subodh Nijsure
• [PATCH 1/3] ARM: imx6q: add clocks for gpmi-nand   Huang Shijie
• [PATCH 2/3] ARM: imx6q: add DT node for gpmi nand   Huang Shijie
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Huang Shijie
• Panda ES board hang when using GPIO as interrupt   DebBarma, Tarun Kanti
• [PATCH] ARM: dma-mapping: fix build break on no-MMU platform   Marek Szyprowski
• commit "ARM: dma-mapping: remove custom consistent dma region"   Marek Szyprowski
• [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error   Shubhrajyoti
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Huang Shijie
• [PATCH 0/3] Add ability to set defaultless network device MAC addresses to deterministic computed locally administered values   Andy Green
• [PATCH 1/3] OMAP2+: add cpu id register to MAC address helper   Andy Green
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Andy Green
• [PATCH 3/3] OMAP4 PANDA register ethernet and wlan for automatic mac allocation   Andy Green
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [PATCH v2] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH 1/2] ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure   Shubhrajyoti
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Dong Aisheng
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Mohammed, Afzal
• [PATCH v2] ARM: Orion: Fix WDT compile for Dove and MV78xx0   Andrew Lunn
• [PATCHv2] ARM: dts: cfa10036: Add Power LED to the CFA-10036 board   Maxime Ripard
• [PATCH 2/2] MFD: mc13xxx workaround SPI hardware bug on i.Mx   Philippe Rétornaz
• [PATCH] ARM: clps711x: Remove the setting of the time   Alexander Shiyan
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Marc Kleine-Budde
• [PATCH 1/2] remoteproc: maintain a generic child device for each rproc   Ohad Ben-Cohen
• [PATCH 1/8] mmc: spi: Move SSP register definitions into separate file   Marek Vasut
• [PATCH 2/8] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP   Marek Vasut
• [PATCH 3/8] mmc: spi: Add necessary bits into mxs-spi.h   Marek Vasut
• [PATCH 4/8] mmc: spi: Pull out parts shared between MMC and SPI   Marek Vasut
• [PATCH 5/8] mmc: spi: Pull out the SSP clock configuration function   Marek Vasut
• [PATCH 6/8] mmc: spi: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH 7/8] mmc: spi: Pull out common DMA parts from MXS MMC   Marek Vasut
• [PATCH 8/8] mmc: spi: Add DMA support into SPI driver   Marek Vasut
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH 4/6] ARM: tegra: Add clk_tegra structure and helper functions   Prashant Gaikwad
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Richard Zhao
• [PATCH 0/3] Add ability to set defaultless network device MAC addresses to deterministic computed locally administered values   Arnd Bergmann
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Arnd Bergmann
• [PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Andy Green
• [PATCH v8 14/14] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH v8 13/14] usb: otg: add basic mxs phy driver support   Richard Zhao
• [PATCH 1/3] OMAP2+: add cpu id register to MAC address helper   Tony Lindgren
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Dong Aisheng
• [PATCH] I2C: OMAP: fix runtime PM get/put balance on error   Shubhrajyoti D
• [PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• [PATCH 1/3] OMAP2+: add cpu id register to MAC address helper   Andy Green
• [PATCH] ARM: imx: fix i.MX35 CPU architecture   Sascha Hauer
• [PATCH 1 of 2] ARM: imx: make ehci power/oc polarities configurable   Sascha Hauer
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c   Dong Aisheng
• How to use ARM ETM/ETB at linux?   Frank Li
• [RFC PATCH] gpio: Add a generic GPIO handling driver   Lothar Waßmann
• [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support   Marc Kleine-Budde
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Marc Kleine-Budde
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Lothar Waßmann
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Dong Aisheng
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c   Dong Aisheng
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Dong Aisheng
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Tony Lindgren
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Lothar Waßmann
• [PATCH v13 0/2] MTD: at91: Add PMECC support for at91 nand flash driver   Josh Wu
• [PATCH v13 1/2] MTD: at91: add dt parameters for Atmel PMECC   Josh Wu
• [PATCH v13 2/2] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller   Josh Wu
• [PATCH v8 00/14] add imx usb driver based on Greg next tree   Richard Zhao
• [PATCH v8 01/14] usb: chipidea: remove unneeded NULL check   Richard Zhao
• [PATCH v8 02/14] usb: chipidea: drop useless arch-check   Richard Zhao
• [PATCH v8 03/14] usb: chipidea: msm: add missing section annotation   Richard Zhao
• [PATCH v8 04/14] usb: chipidea: msm: add remove method   Richard Zhao
• [PATCH v8 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data   Richard Zhao
• [PATCH v8 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci   Richard Zhao
• [PATCH v8 07/14] USB: Chipidea: add unified ci13xxx_{add, remove}_device for platform drivers   Richard Zhao
• [PATCH v8 08/14] USB: Chipidea: add ci13xxx device id management   Richard Zhao
• [PATCH v8 09/14] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig   Richard Zhao
• [PATCH v8 10/14] usb: otg: add notify_connect/notify_disconnect callback   Richard Zhao
• [PATCH v8 11/14] USB: notify phy when root hub port connect change   Richard Zhao
• [PATCH v8 12/14] usb: chipidea: permit driver bindings pass phy pointer   Richard Zhao
• [PATCH v8 13/14] usb: otg: add basic mxs phy driver support   Richard Zhao
• [PATCH v8 14/14] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Dong Aisheng
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Huang Shijie
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Marek Vasut
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Andy Green
• [PATCHv3 00/17] I2C Big cleanup   Shubhrajyoti D
• [PATCHv3 01/17] i2c: omap: switch to devm_* API   Shubhrajyoti D
• [PATCHv3 02/17] i2c: omap: simplify num_bytes handling   Shubhrajyoti D
• [PATCHv3 03/17] i2c: omap: decrease indentation level on data handling   Shubhrajyoti D
• [PATCHv3 04/17] i2c: omap: add blank lines   Shubhrajyoti D
• [PATCHv3 05/17] i2c: omap: simplify omap_i2c_ack_stat()   Shubhrajyoti D
• [PATCHv3 06/17] i2c: omap: split out [XR]DR and [XR]RDY   Shubhrajyoti D
• [PATCHv3 07/17] i2c: omap: improve i462 errata handling   Shubhrajyoti D
• [PATCHv3 08/17] i2c: omap: re-factor receive/transmit data loop   Shubhrajyoti D
• [PATCHv3 09/17] i2c: omap: switch over to do {} while loop   Shubhrajyoti D
• [PATCHv3 10/17] i2c: omap: ack IRQ in parts   Shubhrajyoti D
• [PATCHv3 11/17] i2c: omap: switch to platform_get_irq()   Shubhrajyoti D
• [PATCHv3 12/17] i2c: omap: bus: add a receiver flag   Shubhrajyoti D
• [PATCHv3 13/17] i2c: omap: simplify errata check   Shubhrajyoti D
• [PATCHv3 14/17] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti D
• [PATCHv3 15/17] i2c: omap: simplify IRQ exit path   Shubhrajyoti D
• [PATCHv3 16/17] i2c: omap: resize fifos before each message   Shubhrajyoti D
• [PATCHv3 17/17] i2c: omap: get rid of the "complete" label   Shubhrajyoti D
• [BUILD BREAKAGE] versatile, LEDS updates   Russell King - ARM Linux
• [PATCH v13 0/2] MTD: at91: Add PMECC support for at91 nand flash driver   Artem Bityutskiy
• [PATCH 2/4] mtd: lpc32xx_slc: Make wp gpio optional   Artem Bityutskiy
• [PATCH v9 00/14] add imx usb driver based on Greg next tree   Richard Zhao
• [RFC PATCH 0/3] I2C: Report the actual transferred bytes   Shubhrajyoti D
• [RFC PATCH 1/3] i2c: add 'actual' field to struct i2c_msg   Shubhrajyoti D
• [RFC PATCH 2/3] i2c: omap: implement handling for 'actual' bytes transferred   Shubhrajyoti D
• [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero   Shubhrajyoti D
• [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc   Marc Kleine-Budde
• [PATCH] common: dma-mapping: add support for generic dma_mmap_* calls   Clemens Ladisch
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Shawn Guo
• [PATCH v8 14/14] usb: chipidea: add imx platform driver   Marc Kleine-Budde
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Shawn Guo
• how to specify dma_mask and coherent_dma_mask in hwmod   Bedia, Vaibhav
• [PATCH 1/2] mtd mxc_nand: use 32bit copy functions   Artem Bityutskiy
• [PATCH-V2] ARM: OMAP: cpu: Make cpu_class_is_omap2 true for all non-omap1 platforms   Vaibhav Hiremath
• [PATCH 1/2] mtd mxc_nand: use 32bit copy functions   Uwe Kleine-König
• [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc   Shawn Guo
• [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc   Marc Kleine-Budde
• [PATCH 5/5] at91: Add new board   Prchal Jiří
• [PATCH 1/2] mtd mxc_nand: use 32bit copy functions   Artem Bityutskiy
• [RFC PATCH] Avoid aliasing mappings in DMA coherent allocator   Hiroshi Doyu
• [BUILD BREAKAGE] versatile, LEDS updates   Russell King - ARM Linux
• [PATCH v2] mtd mxc_nand: use 32bit copy functions   Artem Bityutskiy
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c   Shawn Guo
• [PATCH 3/3] OMAP4 PANDA register ethernet and wlan for automatic mac allocation   Tony Lindgren
• [PATCH] ARM: fiq: change FIQ_START to a variable   Shawn Guo
• [PATCH] ARM: pxa: hx4700: Use DEFINE_RES_* macros consistently   Paul Parsons
• [PATCH] I2C: OMAP: fix runtime PM get/put balance on error   Kevin Hilman
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Tony Lindgren
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c   Dong Aisheng
• [PATCH] ARM: fiq: change FIQ_START to a variable   Russell King - ARM Linux
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Dong Aisheng
• [RFC PATCH 1/3] i2c: add 'actual' field to struct i2c_msg   Jean Delvare
• [PATCH v10] MTD: LPC32xx MLC NAND driver   Artem Bityutskiy
• [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero   Jean Delvare
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Shawn Guo
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Dong Aisheng
• [PATCH-V3 3/3] ARM: OMAP2+: CLEANUP: Remove unnecessary ifdef around __omap2_set_globals   Tony Lindgren
• [PATCH] ARM: fiq: change FIQ_START to a variable   Shawn Guo
• RF231 transceiver on at91sam9g20ek board   Alexander Smirnov
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Shawn Guo
• [PATCH 1/1] ARM: OMAP3: PM: don't explicitly enable the IO-chain interrupt   Kevin Hilman
• [PATCH] I2C: OMAP: fix runtime PM get/put balance on error   Shubhrajyoti
• [PATCH v10] MTD: LPC32xx MLC NAND driver   Alexandre Pereira da Silva
• [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero   Jean Delvare
• [PATCH] common: dma-mapping: add support for generic dma_mmap_* calls   Marek Szyprowski
• [PATCH] ARM: OMAP2+: fix CONFIG_CPU_IDLE dependency on CONFIG_PM   Tony Lindgren
• [PATCH v10] MTD: LPC32xx MLC NAND driver   Artem Bityutskiy
• [PATCH] ARM: OMAP2+: do not allow SmartReflex to be built as a module   Tony Lindgren
• [PATCH 0/2] MC13xxx: fix access on i.mx31   Samuel Ortiz
• [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero   Shubhrajyoti
• [PATCH v10] MTD: LPC32xx MLC NAND driver   Alexandre Pereira da Silva
• [PATCH] common: dma-mapping: add support for generic dma_mmap_* calls   Clemens Ladisch
• [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero   Jean Delvare
• [PATCH 16/22] mfd: ab8500-gpadc: Enable IRQF_ONESHOT when requesting a threaded IRQ   Samuel Ortiz
• [PATCH 18/22] mfd: Remove redundant Kconfig entry   Samuel Ortiz
• [PATCH 1/1] ARM: OMAP3: PM: don't explicitly enable the IO-chain interrupt   Javier Martinez Canillas
• [PATCH v4] clk: Add support for rate table based dividers   Rajendra Nayak
• [PATCH v4 0/4] dt: device tree support for TI EMIF driver for 3.6   Santosh Shilimkar
• [PATCH v4 1/4] dt: device tree bindings for LPDDR2 memories   Santosh Shilimkar
• [PATCH v4 2/4] dt: emif: device tree bindings for TI's EMIF sdram controller   Santosh Shilimkar
• [PATCH v4 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards   Santosh Shilimkar
• [PATCH v4 4/4] memory: emif: add device tree support to emif driver   Santosh Shilimkar
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Arnd Bergmann
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH 8/8] mmc: spi: Add DMA support into SPI driver   Fabio Estevam
• Current state of AM33xx patches   Yegor Yefremov
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Tony Lindgren
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Arnd Bergmann
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Andy Green
• [PATCH] I2C: OMAP: fix runtime PM get/put balance on error   Kevin Hilman
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Andy Green
• [PATCH] ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge   Kevin Hilman
• [PATCH 1/1] ARM: OMAP3: PM: don't explicitly enable the IO-chain interrupt   Kevin Hilman
• [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration   Jon Hunter
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Arnd Bergmann
• [PATCH] ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge   Tony Lindgren
• Current state of AM33xx patches   Mark Jackson
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Arnd Bergmann
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Arnd Bergmann
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Arnd Bergmann
• [PATCH 05/14] mfd: Enable DT probing of the DB8500 PRCMU   Samuel Ortiz
• [PATCH 06/14] mfd: Initialise the DB8500 PRCMU driver at core_initcall time   Samuel Ortiz
• [PATCH 07/14] mfd: Initialise the AB8500 driver at core_initcall time   Samuel Ortiz
• [PATCH 01/15] mfd: Add IRQ domain support for the AB8500   Samuel Ortiz
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Tony Lindgren
• [PATCH 03/15] mfd: Make MFD core code Device Tree and IRQ domain aware   Lee Jones
• [PATCH v8 14/14] usb: chipidea: add imx platform driver   Richard Zhao
• [PATCH 02/15] mfd: Generically describe interactions with the DB8500 PRCMU   Samuel Ortiz
• [PATCH 03/15] mfd: Make MFD core code Device Tree and IRQ domain aware   Samuel Ortiz
• [PATCH 2/3] OMAP2+ devices add mac address allocation register api   Arnd Bergmann
• [PATCH 04/15] mfd: ab8500: Register devices using the newly DT:ed MFD API   Samuel Ortiz
• [PATCH 05/15] mfd: db8500-prcmu: Register devices using the newly DT:ed MFD API   Samuel Ortiz
• [PATCH 06/15] mfd: Register the ab8500 from db8500-prcmu using the MFD API   Samuel Ortiz
• [PATCH] ARM: imx: enable support for mx35 rtc   Benoît Thébaudeau
• [PATCH v3] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset fix issues.   Alan Stern
• [PATCH RESEND] mfd: anatop: permit adata be NULL when access register   Samuel Ortiz
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Stephen Warren
• Panda ES board hang when using GPIO as interrupt   Jon Hunter
• [PATCH 04/15] mfd: ab8500: Register devices using the newly DT:ed MFD API   Lee Jones
• [PATCH v2] ARM: Orion: Fix WDT compile for Dove and MV78xx0   Nicolas Pitre
• [PATCH 1/2] rpmsg: avoid premature deallocation of endpoints   Ohad Ben-Cohen
• [PATCH 2/2] rpmsg: make sure inflight messages don't invoke just-removed callbacks   Ohad Ben-Cohen
• [PATCH] ARM: fiq: change FIQ_START to a variable   Russell King - ARM Linux
• [PATCH] gpio/omap: fix invalid context restore of gpio bank-0   Jon Hunter
• [PATCH 0/6] Port Tegra to generic clk framework   Stephen Warren
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• Current state of AM33xx patches   Hiremath, Vaibhav
• [PATCH v2 0/2] Use architected timers for delay loop   Will Deacon
• [PATCH v2 1/2] ARM: arch timer: implement read_current_timer and get_cycles   Will Deacon
• [PATCH v2 2/2] ARM: delay: allow timer-based delay implementation to be selected   Will Deacon
• Current state of AM33xx patches   Hiremath, Vaibhav
• Current state of AM33xx patches   Hiremath, Vaibhav
• Current state of AM33xx patches   Daniel Mack
• Current state of AM33xx patches   Hiremath, Vaibhav
• [PATCH 03/15] mfd: Make MFD core code Device Tree and IRQ domain aware   Samuel Ortiz
• [PATCH 04/15] mfd: ab8500: Register devices using the newly DT:ed MFD API   Samuel Ortiz
• [PATCH] ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge   Paul Walmsley
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   Dinh Nguyen
• [PATCH v2 1/3] ARM: omap: clk: add clk_prepare and clk_unprepare   Paul Walmsley
• [PATCH v2 1/3] ARM: omap: clk: add clk_prepare and clk_unprepare   Paul Walmsley
• [PATCH v2 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Paul Walmsley
• [PATCH v2 3/3] ARM: omap: clk: Remove all direct dereferencing of struct clk   Paul Walmsley
• [PATCH] gpio/omap: fix invalid context restore of gpio bank-0   Franky Lin
• [PATCH] OMAP4: Clock: Correct OTG clock to use otg_60m_gfclk.   Paul Walmsley
• [PATCH v2] Build a zImage or uImage with dtb already appended   Domenico Andreoli
• [PATCH] arm:gemini: fix irq.c   Andreas Bießmann
• [PATCH] ARM: OMAP2+: Fix Wake-up power domain power status   Jon Hunter
• [PATCH RESEND] ARM: OMAP2+: Fix Wake-up power domain power status   Jon Hunter
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Greg Kroah-Hartman
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Jon Hunter
• [PATCH V2] ARM: dt: tegra: seaboard: add regulators   Stephen Warren
• [PATCH V2] ARM: dt: tegra: ventana: add regulators   Stephen Warren
• [PATCH V3] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   Thomas Petazzoni
• [PATCH] ARM: OMAP2: twl-common: fix compiler warnings   Paul Walmsley
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Richard Zhao
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Richard Zhao
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Richard Zhao
• Current state of AM33xx patches   Paul Walmsley
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Greg Kroah-Hartman
• [PATCH] ARM: OMAP4: hwmod data: temporarily remove data for the usb_host_fs and aess IP blocks   Paul Walmsley
• [PATCH v4 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH v3 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH] gpio/omap: fix invalid context restore of gpio bank-0   Shilimkar, Santosh
• [PATCH v4 4/4] memory: emif: add device tree support to emif driver   Greg KH
• [PATCH RESEND] ARM: OMAP2+: Fix Wake-up power domain power status   Shilimkar, Santosh
• [PATCH v4 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH] Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck intransition state.   Vutla, Lokesh
• Current state of AM33xx patches   Daniel Mack
• [PATCH V2] ARM: dt: tegra: ventana: add regulators   Mark Brown
• [PATCH 3/3] ARM: dt: tegra: paz00: add regulators   Mark Brown
• [PATCH 1/3] mfd: support 88pm80x in 80x driver   Mark Brown
• [PATCH 00/10] ARM: S3C24XX gpio cleanups and fixes   Sylwester Nawrocki
• [PATCH 01/10] ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code   Sylwester Nawrocki
• [PATCH 02/10] ARM: S3C24XX: Convert SMDK board file to the gpiolib API   Sylwester Nawrocki
• [PATCH 03/10] ARM: S3C24XX: Convert QT2410 board file to the gpiolib API   Sylwester Nawrocki
• [PATCH 04/10] ARM: S3C24XX: Convert the PM code to gpiolib API   Sylwester Nawrocki
• [PATCH 05/10] ARM: S3C24XX: Convert the touchscreen setup code to common GPIO API   Sylwester Nawrocki
• [PATCH 06/10] ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliases   Sylwester Nawrocki
• [PATCH 07/10] ARM: S3C24XX: Remove unused GPIO definitions for port J   Sylwester Nawrocki
• [PATCH 08/10] ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board   Sylwester Nawrocki
• [PATCH 09/10] ARM: S3C24XX: Correct AC97 clock control bit for S3C2440   Sylwester Nawrocki
• [PATCH 10/10] ARM: S3C24XX: Correct CAMIF interrupt definitions   Sylwester Nawrocki
• [PATCH v10] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH v10] MTD: LPC32xx MLC NAND driver   Artem Bityutskiy
• [PATCH v11] MTD: LPC32xx MLC NAND driver   Roland Stigge
• [PATCH 3/3] mtd: gpmi: change the code for clocks   Mark Brown
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   Pavel Machek
• linux-next: adding the common clk tree   Linus Walleij
• [PATCH] ARM: u300: convert to common clock   Linus Walleij
• [RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.   Arnd Bergmann
• [PATCH v2 3/4] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings   Sergei Shtylyov
• [GIT PULL] imx fixes for v3.5-rc (part 2)   Olof Johansson
• [GIT PULL] Samsung fixes-1 for v3.5   Olof Johansson
• [GIT PULL] ARM: SoC fixes   Olof Johansson
• [GIT PULL] i.MX cpuidle changes for 3.6   Olof Johansson
• [GIT PULL]   Olof Johansson
• [GIT PULL] imx fixes for v3.5-rc (part 2)   Shawn Guo