[PATCH 5/5] Input: ads7846: set proper debounce time in driver level

[Igor Grinberg]

Hi,

This is input subsystem, add Dmitry and linux-input.

On 06/11/12 17:00, Zumeng Chen wrote:
> If we don't set proper debouce time for ads7846, then there are
> flooded interrupt counters of ads7846 responding to one time
> touch on screen, so the driver couldn't work well.
> 
> And since most OMAP3 series boards pass NULL pointer of board_pdata
> to omap_ads7846_init, so it's more proper to set it in driver level
> after having gpio_request done.

What about other non-OMAP platforms?

NULL pointer for board_pdata, only means that the default pdata is used.
Please, see the common-board-devices.c file more closely.

> 
> This patch has been validated on 3530evm.
> 
> Signed-off-by: Zumeng Chen <zumeng.chen at gmail.com>
> Signed-off-by: Syed Mohammed Khasim <khasim at ti.com>
> Signed-off-by: Tony Lindgren <tony at atomide.com>
> ---
>  drivers/input/touchscreen/ads7846.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
> index f02028e..a82a5fb 100644
> --- a/drivers/input/touchscreen/ads7846.c
> +++ b/drivers/input/touchscreen/ads7846.c
> @@ -61,6 +61,7 @@
>  
>  /* this driver doesn't aim at the peak continuous sample rate */
>  #define	SAMPLE_BITS	(8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
> +#define	DEBOUNCE_TIME	310 /* About 10 ms */

I think hard coding this value is wrong.
Can't it be derived from the pdata->debounce_* fields?

>  
>  struct ts_event {
>  	/*
> @@ -980,6 +981,7 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
>  		}
>  
>  		ts->gpio_pendown = pdata->gpio_pendown;
> +		gpio_set_debounce(pdata->gpio_pendown, DEBOUNCE_TIME);
>  
>  	} else {
>  		dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");

-- 
Regards,
Igor.