[PATCH 0/3] Add device tree support to AM33XX SoC
anilkumar at ti.com
Thu Jun 28 06:01:51 EDT 2012
Gentle remainder to this patch series.
On Fri, Jun 22, 2012 at 15:10:46, AnilKumar, Chimata wrote:
> This patch series add device tree support for AM33XX SoC family.
> Initialy Hiremath Vaibhav submitted a patch for AM33XX devices
> based on omap3 family. Details at
> AM33XX family is varied from omap3 family in these aspects
> like memory maps, peripheral base addresses and configuration
> parameters. In some cases we have to use a mix of omap3 and
> omap4 parameters. So a seperate am33xx.dtsi file is created
> for all the devices comes under am33xx family and revert of
> above patch is required.
> Two sepearte device tree source files are created (am335x-evm.dts
> and am335x-bone.dts) to add support for AM335X EVM and BeagleBone
> Linux booting is tested on AM335X-EVM and BeagleBone boards.
> AnilKumar Ch (4):
> Revert "arm/dts: Add support for TI AM335x EVM board"
> arm/dts: Add initial DT support for AM33XX SoC family
> arm/dts: Add support for AM335x EVM
> arm/dts: Add support for AM335x BeagleBone
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/boot/dts/am335x-bone.dts | 20 +++
> arch/arm/boot/dts/am335x-evm.dts | 25 +--
> arch/arm/boot/dts/am33xx.dtsi | 189 ++++++++++++++++++++
> 4 files changed, 215 insertions(+), 22 deletions(-)
> create mode 100644 arch/arm/boot/dts/am335x-bone.dts
> create mode 100644 arch/arm/boot/dts/am33xx.dtsi
More information about the linux-arm-kernel