[PATCH v8 14/14] usb: chipidea: add imx platform driver

[Richard Zhao]

On Fri, Jun 29, 2012 at 01:15:14PM +0200, Marc Kleine-Budde wrote:
> On 06/29/2012 11:49 AM, Richard Zhao wrote:
> > This patch supports only the host-mode functionality so far.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Peter Chen <peter.chen at freescale.com>
> > Cc: Alexander Shishkin <alexander.shishkin at linux.intel.com>
> > Cc: Felipe Balbi <balbi at ti.com>
> > Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> > Tested-by: Subodh Nijsure <snijsure at grid-net.com>
> > ---
> >  .../devicetree/bindings/usb/ci13xxx-imx.txt        |   18 ++
> >  drivers/usb/chipidea/Makefile                      |    3 +
> >  drivers/usb/chipidea/ci13xxx_imx.c                 |  198 ++++++++++++++++++++
> >  3 files changed, 219 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> >  create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> > new file mode 100644
> > index 0000000..2c29041
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> > @@ -0,0 +1,18 @@
> > +* Freescale i.MX ci13xxx usb controllers
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,imx27-usb"
> > +- reg: Should contain registers location and length
> > +- interrupts: Should contain controller interrupt
> > +
> > +Optional properties:
> > +- fsl,usbphy: phandler of usb phy that connects to the only one port
> > +- vbus-supply: regulator for vbus
> > +
> > +Examples:
> > +usb at 02184000 { /* USB OTG */
> > +	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> > +	reg = <0x02184000 0x200>;
> > +	interrupts = <0 43 0x04>;
> > +	fsl,usbphy = <&usbphy1>;
> > +};
> > diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> > index b69900a..5c66d9c 100644
> > --- a/drivers/usb/chipidea/Makefile
> > +++ b/drivers/usb/chipidea/Makefile
> > @@ -14,3 +14,6 @@ ifneq ($(CONFIG_PCI),)
> >  	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_pci.o
> >  endif
> >  
> > +ifneq ($(CONFIG_OF_DEVICE),)
> > +	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o
> > +endif
> > diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> > new file mode 100644
> > index 0000000..ef60d06
> > --- /dev/null
> > +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> > @@ -0,0 +1,198 @@
> > +/*
> > + * Copyright 2012 Freescale Semiconductor, Inc.
> > + * Copyright (C) 2012 Marek Vasut <marex at denx.de>
> > + * on behalf of DENX Software Engineering GmbH
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/usb/chipidea.h>
> > +#include <linux/clk.h>
> > +#include <linux/regulator/consumer.h>
> > +
> > +#include "ci.h"
> > +
> > +#define pdev_to_phy(pdev) \
> > +	((struct usb_phy *)platform_get_drvdata(pdev))
> > +
> > +struct ci13xxx_imx_data {
> > +	struct device_node *phy_np;
> > +	struct usb_phy *phy;
> > +	struct platform_device *ci_pdev;
> > +	struct clk *clk;
> > +	struct regulator *reg_vbus;
> > +};
> > +
> > +static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
> > +	.name			= "ci13xxx_imx",
> > +	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
> > +				  CI13XXX_PULLUP_ON_VBUS |
> > +				  CI13XXX_DISABLE_STREAMING,
> > +	.capoffset		= DEF_CAPOFFSET,
> > +};
> > +
> > +static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
> > +{
> > +	struct ci13xxx_imx_data *data;
> > +	struct platform_device *plat_ci, *phy_pdev;
> > +	struct device_node *phy_np;
> > +	struct resource *res;
> > +	struct regulator *reg_vbus;
> > +	int ret;
> > +
> > +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> > +	if (!data) {
> > +		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	if (!res) {
> > +		dev_err(&pdev->dev, "Can't get device resources!\n");
> > +		return -ENOENT;
> > +	}
> > +
> > +	data->clk = devm_clk_get(&pdev->dev, NULL);
> > +	if (IS_ERR(data->clk)) {
> > +		dev_err(&pdev->dev,
> > +			"Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
> > +		return PTR_ERR(data->clk);
> > +	}
> > +
> > +	ret = clk_prepare_enable(data->clk);
> > +	if (ret) {
> > +		dev_err(&pdev->dev,
> > +			"Failed to prepare or enable clock, err=%d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
> > +	if (phy_np) {
> > +		data->phy_np = phy_np;
> > +		phy_pdev = of_find_device_by_node(phy_np);
> > +		if (phy_pdev) {
> > +			struct usb_phy *phy;
> > +			phy = pdev_to_phy(phy_pdev);
> > +			if (phy &&
> > +			    try_module_get(phy_pdev->dev.driver->owner)) {
> > +				usb_phy_init(phy);
> > +				data->phy = phy;
> > +			}
> > +		}
> > +	}
> 
> what about using devm_usb_get_phy_by_phandle() as proposed in Kishon's
> patch: "drivers: usb: otg: add device tree support to otg library".
I won't use it until it's accepted.

Thanks
Richard
> 
> Marc
>