[RFC 4/4] sched: cpu_power: enable ARCH_POWER

[Vincent Guittot]

On 13 June 2012 15:28, Peter Zijlstra <peterz at infradead.org> wrote:
> On Wed, 2012-06-13 at 15:20 +0200, Vincent Guittot wrote:
>>
>> In v3.4, x86 hasn't got any specific declaration for
>> arch_scale_freq_power so it would now use the weak
>> arch_scale_freq_power which calls default_scale_freq_power. Isn't it
>> enough ?
>
> ---
> Subject: sched, x86: Remove broken power estimation
> From: Peter Zijlstra <a.p.zijlstra at chello.nl>
> Date: Wed Jun 13 15:24:45 CEST 2012
>
> The x86 sched power implementation has been broken forever and gets in
> the way of other stuff, remove it.
>
> For archaeological interest, fixing this code would require dealing with
> the cross-cpu calling of these functions and more importantly, we need
> to filter idle time out of the a/m-perf stuff because the ratio will go
> down to 0 when idle, giving a 0 capacity which is not what we'd want.
>
> Signed-off-by: Peter Zijlstra <a.p.zijlstra at chello.nl>
> Link: http://lkml.kernel.org/n/tip-wjjwelpti8f8k7i1pdnzmdr8@git.kernel.org
> ---
>  arch/x86/kernel/cpu/Makefile |    2 -
>  arch/x86/kernel/cpu/sched.c  |   55 -------------------------------------------
>  2 files changed, 1 insertion(+), 56 deletions(-)
>
> --- a/arch/x86/kernel/cpu/Makefile
> +++ b/arch/x86/kernel/cpu/Makefile
> @@ -14,7 +14,7 @@ CFLAGS_common.o               := $(nostackp)
>
>  obj-y                  := intel_cacheinfo.o scattered.o topology.o
>  obj-y                  += proc.o capflags.o powerflags.o common.o
> -obj-y                  += vmware.o hypervisor.o sched.o mshyperv.o
> +obj-y                  += vmware.o hypervisor.o mshyperv.o
>  obj-y                  += rdrand.o
>  obj-y                  += match.o
>
> --- a/arch/x86/kernel/cpu/sched.c
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -#include <linux/sched.h>
> -#include <linux/math64.h>
> -#include <linux/percpu.h>
> -#include <linux/irqflags.h>
> -
> -#include <asm/cpufeature.h>
> -#include <asm/processor.h>
> -
> -#ifdef CONFIG_SMP
> -
> -static DEFINE_PER_CPU(struct aperfmperf, old_perf_sched);
> -
> -static unsigned long scale_aperfmperf(void)
> -{
> -       struct aperfmperf val, *old = &__get_cpu_var(old_perf_sched);
> -       unsigned long ratio, flags;
> -
> -       local_irq_save(flags);
> -       get_aperfmperf(&val);
> -       local_irq_restore(flags);
> -
> -       ratio = calc_aperfmperf_ratio(old, &val);
> -       *old = val;
> -
> -       return ratio;
> -}
> -
> -unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu)
> -{
> -       /*
> -        * do aperf/mperf on the cpu level because it includes things
> -        * like turbo mode, which are relevant to full cores.
> -        */
> -       if (boot_cpu_has(X86_FEATURE_APERFMPERF))
> -               return scale_aperfmperf();
> -
> -       /*
> -        * maybe have something cpufreq here
> -        */
> -
> -       return default_scale_freq_power(sd, cpu);
> -}
> -
> -unsigned long arch_scale_smt_power(struct sched_domain *sd, int cpu)
> -{
> -       /*
> -        * aperf/mperf already includes the smt gain
> -        */
> -       if (boot_cpu_has(X86_FEATURE_APERFMPERF))
> -               return SCHED_LOAD_SCALE;
> -
> -       return default_scale_smt_power(sd, cpu);
> -}
> -
> -#endif
>

Sorry for the misses, I need to update my tags because this has been filtered.