[PATCH 1/3] ARM: dt: tegra: seaboard: add regulators

[Stephen Warren]

On 06/25/2012 09:24 AM, Laxman Dewangan wrote:
> On Monday 25 June 2012 08:42 PM, Stephen Warren wrote:
>> On 06/25/2012 12:24 AM, Laxman Dewangan wrote:
>>> On Saturday 23 June 2012 04:44 AM, Stephen Warren wrote:
>>>> From: Stephen Warren<swarren at nvidia.com>
>>>>
>>>> Seaboard uses a TPS6586x regulator. Instantiate this, and hook up a
>>>> couple of fixed GPIO-controlled regulators too.
...
>>>> +                regulator at 3 {
>>>> +                    reg =<3>;
>>>> +                    regulator-compatible = "ldo0";
>>>> +                    regulator-name = "vdd_ldo0";
>>>> +                    regulator-min-microvolt =<1250000>;
>>>> +                    regulator-max-microvolt =<3300000>;
>>>> +                    vin-supply =<&sm2_reg>;
>>> I think support for vin-supply is still not there for this regulator in
>>> driver.
>> That's also true. I wonder if we shouldn't support this in the regulator
>> core bindings instead, since the existence of a parent regulator seems
>> likely to be common. Either way, I'd like to include the property to
>> document it for now.
> 
> I had detailed discussion with Mark on  this support and as per him
> (based on my understanding), the input to different regulator is from
> the pin of the chips and so the name should be the <pin-name>-supply
> which should be part of chip-dt binding, not to the particular rail.

OK, that's fine. Can you please update the TPS6586x binding and driver
to allow this to be represented correctly then. Thanks.