arch/arm/mach-s3c2410/Kconfig is unsourced

[Paul Bolle]

On Tue, 2012-04-24 at 17:05 -0700, Kukjin Kim wrote:
> Paul Bolle wrote:
> > 0) commit 85fd6d63bf2927b9da7ab1b0d46723bfdb13808c ("ARM: S3C2410: move
> > mach-s3c2410/* into mach-s3c24xx/") orphaned
> > arch/arm/mach-s3c2410/Kconfig: currently nothing sources that file in
> > Linus' tree.
> >
> Oops, you're right.
> 
> > 1) I haven't looked in depth at this, but this made S3C2410_PLLTABLE
> > disappear from the build system (ie, arch/arm/mach-s3c2410/pll.c is dead
> > code now). Moreover, this basically turned both "select S3C2410_CPUFREQ
> > if CPU_FREQ_S3C24XX", under "config CPU_S3C2410", and "select
> > S3C2410_IOTIMING if S3C2410_CPUFREQ", under "config ARCH_BAST", into
> > nops (both in arch/arm/mach-s3c24xx/Kconfig).
> >
> > 2) So to me it seems the move has only been done half: either more
> > things needs to be moved or those things can be removed entirely. But
> > perhaps arch/arm/mach-s3c2410/Kconfig should just be sourced again.
> >
> Yes, I think, would be better right now, if we could add just sourcing 
> mach-s3c2410/Kconfig but as you said, I need to remove entire mach-s3c24 
> stuff.
> 
> Thanks for your pointing out and let me fix it.

I reported this issue just after v3.4-rc4 was released. We're now at
v3.5-rc2 and arch/arm/mach-s3c2410/Kconfig is still unsourced. I'm
tempted to submit a clean up patch (though I haven't checked what
currently can be removed because that Kconfig file is still unsourced).
But perhaps there's a fix pending in some development branch.


Paul Bolle