[PATCHv8 11/13] I2C: OMAP: decrease indentation level on data handling

[Shubhrajyoti D]

From: Felipe Balbi <balbi at ti.com>

trivial patch, no functional changes.

Signed-off-by: Felipe Balbi <balbi at ti.com>
Reviewed-by : Santosh Shilimkar <santosh.shilimkar at ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti at ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   63 ++++++++++++++++++++---------------------
 1 files changed, 31 insertions(+), 32 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 080193a..0e0ab8f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -845,22 +845,7 @@ complete:
 							>> 8) & 0x3F;
 			}
 			while (num_bytes--) {
-				w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
-				if (dev->buf_len) {
-					*dev->buf++ = w;
-					dev->buf_len--;
-					/*
-					 * Data reg in 2430, omap3 and
-					 * omap4 is 8 bit wide
-					 */
-					if (dev->flags &
-						 OMAP_I2C_FLAG_16BIT_DATA_REG) {
-						if (dev->buf_len) {
-							*dev->buf++ = w >> 8;
-							dev->buf_len--;
-						}
-					}
-				} else {
+				if (!dev->buf_len) {
 					if (stat & OMAP_I2C_STAT_RRDY)
 						dev_err(dev->dev,
 							"RRDY IRQ while no data"
@@ -871,6 +856,21 @@ complete:
 								" requested\n");
 					break;
 				}
+
+				w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
+				*dev->buf++ = w;
+				dev->buf_len--;
+				/*
+				 * Data reg in 2430, omap3 and
+				 * omap4 is 8 bit wide
+				 */
+				if (dev->flags &
+						OMAP_I2C_FLAG_16BIT_DATA_REG) {
+					if (dev->buf_len) {
+						*dev->buf++ = w >> 8;
+						dev->buf_len--;
+					}
+				}
 			}
 			omap_i2c_ack_stat(dev,
 				stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
@@ -887,22 +887,7 @@ complete:
 							& 0x3F;
 			}
 			while (num_bytes--) {
-				w = 0;
-				if (dev->buf_len) {
-					w = *dev->buf++;
-					dev->buf_len--;
-					/*
-					 * Data reg in 2430, omap3 and
-					 * omap4 is 8 bit wide
-					 */
-					if (dev->flags &
-						 OMAP_I2C_FLAG_16BIT_DATA_REG) {
-						if (dev->buf_len) {
-							w |= *dev->buf++ << 8;
-							dev->buf_len--;
-						}
-					}
-				} else {
+				if (!dev->buf_len) {
 					if (stat & OMAP_I2C_STAT_XRDY)
 						dev_err(dev->dev,
 							"XRDY IRQ while no "
@@ -914,6 +899,20 @@ complete:
 					break;
 				}
 
+				w = *dev->buf++;
+				dev->buf_len--;
+				/*
+				 * Data reg in 2430, omap3 and
+				 * omap4 is 8 bit wide
+				 */
+				if (dev->flags &
+						OMAP_I2C_FLAG_16BIT_DATA_REG) {
+					if (dev->buf_len) {
+						w |= *dev->buf++ << 8;
+						dev->buf_len--;
+					}
+				}
+
 				if ((dev->errata & I2C_OMAP_ERRATA_I462) &&
 				    errata_omap3_i462(dev, &stat, &err))
 					goto complete;
-- 
1.7.5.4