[PATCH] ARM: mx28: Add LCD pinmux

[Fabio Estevam]

Hi Marek,

On Sat, Jun 23, 2012 at 3:45 PM, Marek Vasut <marex at denx.de> wrote:
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Detlev Zundel <dzu at denx.de>
> CC: Dong Aisheng <b29396 at freescale.com>
> CC: Fabio Estevam <fabio.estevam at freescale.com>
> Cc: Linux ARM kernel <linux-arm-kernel at lists.infradead.org>
> CC: Shawn Guo <shawn.guo at linaro.org>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Wolfgang Denk <wd at denx.de>
> ---
>  arch/arm/boot/dts/imx28.dtsi |   45 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 464303c..ab29cbe 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -221,6 +221,51 @@
>                                        fsl,pull-up = <0>;
>                                };
>
> +                               lcd_data_pins_8bpp_a: lcd at 0 {

Please remove the "bpp" from all the names.

bpp is usually used for the pixel depth in a framebuffer, and what you
are describing here is how many bits are physically connected into the
LCD interface.

Regards,

Fabio Estevam