[PATCH v2 14/17] i2c: omap: simplify errata check

[Felipe Balbi]

omap_i2c_dev is allocated with kzalloc(),
so we need not initialize b_hw to zero.

Signed-off-by: Felipe Balbi <balbi at ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 6a7395a..6e97d86 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1138,9 +1138,7 @@ omap_i2c_probe(struct platform_device *pdev)
 
 		dev->fifo_size = (dev->fifo_size / 2);
 
-		if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
-			dev->b_hw = 0; /* Disable hardware fixes */
-		else
+		if (dev->rev < OMAP_I2C_REV_ON_3530_4430)
 			dev->b_hw = 1; /* Enable hardware fixes */
 
 		/* calculate wakeup latency constraint for MPU */
-- 
1.7.10.4