[PATCH 2/2] ARM: S3C64XX: Dynamically assign interrupts for CPU PMIC on Cragganmore

[Kukjin Kim]

Mark Brown wrote:
> 
> Now that the WM831x driver uses irq_domain we can happily allow it to
> assign its own IRQs.
> 
> Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
> ---
>  arch/arm/mach-s3c64xx/include/mach/crag6410.h |    3 +--
>  arch/arm/mach-s3c64xx/mach-crag6410.c         |    1 -
>  2 files changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h
> b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
> index ec97c15..4c3c999 100644
> --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h
> +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
> @@ -13,8 +13,7 @@
> 
>  #include <linux/gpio.h>
> 
> -#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
> -#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
> +#define GLENFARCLAS_PMIC_IRQ_BASE	IRQ_BOARD_START
> 
>  #define PCA935X_GPIO_BASE		GPIO_BOARD_START
>  #define CODEC_GPIO_BASE			(GPIO_BOARD_START + 8)
> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-
> s3c64xx/mach-crag6410.c
> index d0c352d..161c3b6 100644
> --- a/arch/arm/mach-s3c64xx/mach-crag6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
> @@ -525,7 +525,6 @@ static struct wm831x_touch_pdata touch_pdata
> __initdata = {
> 
>  static struct wm831x_pdata crag_pmic_pdata __initdata = {
>  	.wm831x_num = 1,
> -	.irq_base = BANFF_PMIC_IRQ_BASE,
>  	.gpio_base = BANFF_PMIC_GPIO_BASE,
>  	.soft_shutdown = true,
> 
> --
> 1.7.10

OK, will apply.
Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.