[PATCH v2] ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support
Shawn Guo
shawn.guo at linaro.org
Wed Jun 20 21:44:27 EDT 2012
On Wed, Jun 20, 2012 at 02:41:50PM +0800, Hui Wang wrote:
> Imx6q sabrelite board uses ecspi1 to connect a spi flash sst25vf016b,
> we need to add pinctrl information for it in the dts, otherwise the
> ecspi1 driver can't work and the connected flash is wrongly
> detected as a mr25h256 flash like this:
>
> m25p80 spi32766.0: found mr25h256, expected sst25vf016b
> m25p80 spi32766.0: mr25h256 (32 Kbytes)
>
> Cc: Richard Zhao <richard.zhao at freescale.com>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Signed-off-by: Hui Wang <jason77.wang at gmail.com>
> ---
> In the v2, i moved gpio pinctrl declaration from the ${soc}.dtsi to the
> ${board).dts, since the gpio assignment is board specific.
>
> This patch is based on the richard.zhao's patch:
> http://permalink.gmane.org/gmane.linux.usb.general/65761
>
> arch/arm/boot/dts/imx6q-sabrelite.dts | 5 ++++-
> arch/arm/boot/dts/imx6q.dtsi | 8 ++++++++
> 2 files changed, 12 insertions(+), 1 deletion(-)
>
Looks good. Will apply after prerequisite patch gets applied. Thanks.
Regards,
Shawn
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index 5bba0d1..f7d91ad 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -27,6 +27,8 @@
> ecspi at 02008000 { /* eCSPI1 */
> fsl,spi-num-chipselects = <1>;
> cs-gpios = <&gpio3 19 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1_1>;
> status = "okay";
>
> flash: m25p80 at 0 {
> @@ -48,7 +50,8 @@
> gpios {
> pinctrl_gpio_hog: gpiohog {
> fsl,pins = <1044 0x80000000 /* MX6Q_PAD_GPIO_17__GPIO_7_12 */
> - 144 0x80000000>; /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
> + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
> + 121 0x80000000>; /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
> };
> };
> };
> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index ccc8a5f..9fb1683 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -540,6 +540,14 @@
> 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
> };
> };
> +
> + ecspi1 {
> + pinctrl_ecspi1_1: ecspi1grp-1 {
> + fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
> + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
> + 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
> + };
> + };
> };
>
> dcic at 020e4000 { /* DCIC1 */
> --
> 1.7.11
>
More information about the linux-arm-kernel
mailing list