[PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver

[Josh Wu]

On 6/27/2012 12:28 PM, Artem Bityutskiy wrote:
> On Wed, 2012-06-27 at 12:11 +0800, Josh Wu wrote:
>> Hi, Artem
>>
>> On 6/27/2012 11:49 AM, Artem Bityutskiy wrote:
>>> On Mon, 2012-06-25 at 18:07 +0800, Josh Wu wrote:
>>>> Those patches is based on v3.5-rc4
>>>>
>>>> Changes since v10,
>>>> 	add one more patch in this patch set, which add 'int' return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl.
>>>> 	Instead of calling BUG(), atmel_nand_pmecc_write_page() will return -EIO when time out to read the pmecc status register.
>>>> 	increase the time-out duration to 100ms, which has more toleration.
>>>> 	add oob_required argument for pmecc read/write functions to align with v3.5-rc4.
>>> I have issues compiling l2-mtd.git tree (based on 3.5-rc5) with the
>>> attached defconfig. Probably not your fault, but may be you have a
>>> fix/suggestion? I did not have time to look closer. Aiaiai reports:
>> I think the name of kernel config for AT91 is changed, so you can try
>> add following two line in your original config file.
>>
>> CONFIG_SOC_AT91SAM9=y
>> CONFIG_SOC_AT91RM9200=y
>>
>> run the make menuconfig will get new config, that can pass the compile.
> I get "arm-unknown-linux-gnueabi-ld: no machine record defined". I think
> it wants me to select the board. I've tried one and get another
> compilation issue:
>
> arch/arm/mach-at91/built-in.o:(.arch.info.init+0xbc): undefined
> reference to `at91sam926x_timer'
>
> It looks like AT91 stuff is not looked after carefully.

I find out the reason, we need add "CONFIG_ARCH_AT91RM9200=y" in your 
config file. The ARCH_AT91xxx is for non DT board.
more information can be found in: 
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1e3ce2b8545390a2aee8dbfcd49ca4161b636000
which introduce SOC_AT91xxx definition for SoC core support.

> Can you please send me a working defconfig based on the one I sent you -
> just modify it.
>

I attached the defconfig file.

Best Regards,
Josh Wu

-------------- next part --------------
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUPS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_SCHED=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_SGI_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_ARCH_AT91=y
CONFIG_MACH_ONEARM=y
CONFIG_ARCH_AT91RM9200=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_AT91RM9200EK=y
CONFIG_MACH_CSB337=y
CONFIG_MACH_CSB637=y
CONFIG_MACH_CARMEVA=y
CONFIG_MACH_ATEB9200=y
CONFIG_MACH_KB9200=y
CONFIG_MACH_PICOTUX2XX=y
CONFIG_MACH_KAFA=y
CONFIG_MACH_ECBAT91=y
CONFIG_MACH_YL9200=y
CONFIG_MACH_CPUAT91=y
CONFIG_MACH_ECO920=y
CONFIG_MACH_RSI_EWS=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_PCCARD=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_USE_OF=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_BINFMT_MISC=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEBUG_DEVRES=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=y
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=y
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
CONFIG_MTD_MAP_BANK_WIDTH_16=y
# CONFIG_MTD_CFI_I1 is not set
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_OF=m
CONFIG_MTD_IMPA7=m
CONFIG_MTD_PCMCIA=m
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_GPIO_ADDR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=m
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTD_BLOCK2MTD=m
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCG3=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_DOCG4=m
CONFIG_MTD_NAND_ATMEL=m
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
CONFIG_MTD_LPDDR=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=m
# CONFIG_BLK_DEV is not set
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
# CONFIG_HWMON is not set
CONFIG_DRM=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=m
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QFMT_V2=y
CONFIG_JFFS2_FS=y
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
# CONFIG_UBIFS_FS_ZLIB is not set
CONFIG_UBIFS_FS_DEBUG=y
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set