[PATCH 3/3] usb: chipidea: ci13xxx-imx: add "dr_role" property to device tree bindings
Marc Kleine-Budde
mkl at pengutronix.de
Wed Jun 27 08:21:50 EDT 2012
This patch allows the device tree to limit the chipidea to host or
peripheral mode only.
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
---
.../devicetree/bindings/usb/ci13xxx-imx.txt | 4 ++
arch/arm/boot/dts/imx28.dtsi | 1 +
drivers/usb/chipidea/ci13xxx_imx.c | 3 ++
drivers/usb/chipidea/core.c | 40 +++++++++++++++++---
include/linux/usb/chipidea.h | 9 +++++
5 files changed, 51 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index 8bcd071..f55f2d5 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -4,6 +4,9 @@ Required properties:
- compatible: Should be "fsl,imx27-usb"
- reg: Should contain registers location and length
- interrupts: Should contain controller interrupt
+- dr_mode: indicates the working mode for "fsl,imx27-usb" compatible
+ controllers. Can be "host", "peripheral", or "otg". Defaults to
+ "otg" if not defined.
Optional properties:
- fsl,usbphy: phandler of usb phy that connects to the only one port
@@ -17,4 +20,5 @@ usb at 02184000 { /* USB OTG */
interrupts = <0 43 0x04>;
fsl,usbphy = <&usbphy1>;
fsl,vbus-power-gpios = <&gpio3 22 0>;
+ dr_mode= "otg";
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 65d6ae3..9cbf9b9 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -467,6 +467,7 @@
interrupts = <93>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
+ dr_mode = "host";
};
usb1: usb at 80090000 {
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index efae2be..8e926fb 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -120,6 +120,9 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
*pdev->dev.dma_mask = DMA_BIT_MASK(32);
dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
}
+
+ ci13xxx_get_dr_mode(pdev->dev.of_node, &ci13xxx_imx_platdata);
+
plat_ci = ci13xxx_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
&ci13xxx_imx_platdata);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 1083585..89d2cae 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -63,6 +63,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
+#include <linux/of_platform.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
@@ -386,6 +387,23 @@ void ci13xxx_remove_device(struct platform_device *pdev)
}
EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
+void ci13xxx_get_dr_mode(struct device_node *of_node, struct ci13xxx_platform_data *pdata)
+{
+ const unsigned char *dr_mode;
+
+ dr_mode = of_get_property(of_node, "dr_mode", NULL);
+ if (!dr_mode)
+ return;
+
+ if (!strcmp(dr_mode, "host"))
+ pdata->flags |= CI13XXX_DR_MODE_HOST;
+ else if (!strcmp(dr_mode, "peripheral"))
+ pdata->flags |= CI13XXX_DR_MODE_PERIPHERAL;
+ else if (!strcmp(dr_mode, "otg"))
+ pdata->flags |= CI13XXX_DR_MODE_OTG;
+}
+EXPORT_SYMBOL_GPL(ci13xxx_get_dr_mode);
+
static int __devinit ci_hdrc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -446,13 +464,23 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
}
/* initialize role(s) before the interrupt is requested */
- ret = ci_hdrc_host_init(ci);
- if (ret)
- dev_info(dev, "doesn't support host\n");
+ /* default to otg */
+ if (!(ci->platdata->flags & CI13XXX_DR_MODE_MASK))
+ ci->platdata->flags |= CI13XXX_DR_MODE_OTG;
+
+ if (ci->platdata->flags &
+ (CI13XXX_DR_MODE_HOST | CI13XXX_DR_MODE_OTG)) {
+ ret = ci_hdrc_host_init(ci);
+ if (ret)
+ dev_info(dev, "doesn't support host\n");
+ }
- ret = ci_hdrc_gadget_init(ci);
- if (ret)
- dev_info(dev, "doesn't support gadget\n");
+ if (ci->platdata->flags &
+ (CI13XXX_DR_MODE_PERIPHERAL | CI13XXX_DR_MODE_OTG)) {
+ ret = ci_hdrc_gadget_init(ci);
+ if (ret)
+ dev_info(dev, "doesn't support gadget\n");
+ }
if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
dev_err(dev, "no supported roles\n");
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 544825d..29ad908 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -19,6 +19,12 @@ struct ci13xxx_platform_data {
#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)
#define CI13XXX_PULLUP_ON_VBUS BIT(2)
#define CI13XXX_DISABLE_STREAMING BIT(3)
+#define CI13XXX_DR_MODE_HOST BIT(4)
+#define CI13XXX_DR_MODE_PERIPHERAL BIT(5)
+#define CI13XXX_DR_MODE_OTG BIT(6)
+#define CI13XXX_DR_MODE_MASK \
+ (CI13XXX_DR_MODE_HOST | CI13XXX_DR_MODE_PERIPHERAL | \
+ CI13XXX_DR_MODE_OTG)
#define CI13XXX_CONTROLLER_RESET_EVENT 0
#define CI13XXX_CONTROLLER_STOPPED_EVENT 1
@@ -35,4 +41,7 @@ struct platform_device *ci13xxx_add_device(struct device *dev,
/* Remove ci13xxx device */
void ci13xxx_remove_device(struct platform_device *pdev);
+/* Parse of-tree "dr_mode" property */
+void ci13xxx_get_dr_mode(struct device_node *of_node, struct ci13xxx_platform_data *pdata);
+
#endif
--
1.7.10
More information about the linux-arm-kernel
mailing list