[PATCH] ARM: highbank: Add smc calls to enable/disable the L2

[Rob Herring]

From: Rob Herring <rob.herring at calxeda.com>

Linux runs in non-secure mode on highbank, so we need secure monitor calls
to enable and disable the PL310. Rather than invent new smc calls, the same
calling convention used by OMAP is used here.

Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
 arch/arm/mach-highbank/Makefile   |    6 +++++-
 arch/arm/mach-highbank/core.h     |    1 +
 arch/arm/mach-highbank/highbank.c |   14 ++++++++++++++
 arch/arm/mach-highbank/smc.S      |   29 +++++++++++++++++++++++++++++
 4 files changed, 49 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-highbank/smc.S

diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index f8437dd..ded4652 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,4 +1,8 @@
-obj-y					:= clock.o highbank.o system.o
+obj-y					:= clock.o highbank.o system.o smc.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
+
 obj-$(CONFIG_DEBUG_HIGHBANK_UART)	+= lluart.o
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index d8e2d0b..141ed51 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void);
 static inline void highbank_lluart_map_io(void) {}
 #endif
 
+extern void highbank_smc1(int fn, int arg);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 410a112..8777612 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = {
 	{}
 };
 
+#ifdef CONFIG_CACHE_L2X0
+static void highbank_l2x0_disable(void)
+{
+	/* Disable PL310 L2 Cache controller */
+	highbank_smc1(0x102, 0x0);
+}
+#endif
+
 static void __init highbank_init_irq(void)
 {
 	of_irq_init(irq_match);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Enable PL310 L2 Cache controller */
+	highbank_smc1(0x102, 0x1);
 	l2x0_of_init(0, ~0UL);
+	outer_cache.disable = highbank_l2x0_disable;
+#endif
 }
 
 static void __init highbank_timer_init(void)
diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S
new file mode 100644
index 0000000..bba369e
--- /dev/null
+++ b/arch/arm/mach-highbank/smc.S
@@ -0,0 +1,29 @@
+/*
+ * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number. It uses few CPU registers
+ * internally and hence they need be backed up including
+ * link register "lr".
+ * Function signature : void highbank_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(highbank_smc1)
+	stmfd   sp!, {r2-r12, lr}
+	mov	r12, r0
+	mov 	r0, r1
+	dsb
+	smc	#0
+	ldmfd   sp!, {r2-r12, pc}
+ENDPROC(highbank_smc1)
-- 
1.7.9.5