[PATCH] ARM: OMAP2+: do not allow SmartReflex to be built as a module

Kevin Hilman khilman at ti.com
Thu Jun 28 12:55:38 EDT 2012


From: Jean Pihet <j-pihet at ti.com>

Disable the module option for POWER_AVS since this is currently not
supported.

This patch fixes these error in the case POWER_AVS is set to 'm':

arch/arm/mach-omap2/built-in.o: In function `sr_class3_configure':
/home/tmlind/src/linux-2.6/arch/arm/mach-omap2/smartreflex-class3.c:43: undefined reference to `sr_configure_errgen'
arch/arm/mach-omap2/built-in.o: In function `sr_class3_disable':
/home/tmlind/src/linux-2.6/arch/arm/mach-omap2/smartreflex-class3.c:33: undefined reference to `sr_disable_errgen'
/home/tmlind/src/linux-2.6/arch/arm/mach-omap2/smartreflex-class3.c:35: undefined reference to `sr_disable'
arch/arm/mach-omap2/built-in.o: In function `sr_class3_enable':
/home/tmlind/src/linux-2.6/arch/arm/mach-omap2/smartreflex-class3.c:28: undefined reference to `sr_enable'
arch/arm/mach-omap2/built-in.o: In function `sr_class3_init':
/home/tmlind/src/linux-2.6/arch/arm/mach-omap2/smartreflex-class3.c:59: undefined reference to `sr_register_class'

Reported-by: Tony Lindgren <tony at atomide.com>
Signed-off-by: Jean Pihet <j-pihet at ti.com>
Signed-off-by: Kevin Hilman <khilman at ti.com>
---
Tony, this one fixes the SR related build errors you saw with
randconfig.  It applies to my for_3.6/pm/sr-move branch which is now
included in your devel-driver.  Let me know if want me to fold this
into the original and re-spin the branch.

Also, special thanks to Jean for fixing this immediatly after it 
was reported!

 drivers/power/avs/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
index 18493f7..2a1008b 100644
--- a/drivers/power/avs/Kconfig
+++ b/drivers/power/avs/Kconfig
@@ -1,5 +1,5 @@
 menuconfig POWER_AVS
-	tristate "Adaptive Voltage Scaling class support"
+	bool "Adaptive Voltage Scaling class support"
 	help
 	  AVS is a power management technique which finely controls the
 	  operating voltage of a device in order to optimize (i.e. reduce)
-- 
1.7.9.2




More information about the linux-arm-kernel mailing list