[PATCH 11/14] ARM: LPC32xx: DTS adjustment for using pl18x primecell

[Roland Stigge]

This patch adjusts the dts files to reference the pl18x primecell driver
correctly.

Signed-off-by: Roland Stigge <stigge at antcom.de>
---
 arch/arm/boot/dts/lpc32xx.dtsi |    3 ++-
 arch/arm/boot/dts/phy3250.dts  |    8 ++++++++
 2 files changed, 10 insertions(+), 1 deletion(-)

--- linux-2.6.orig/arch/arm/boot/dts/lpc32xx.dtsi
+++ linux-2.6/arch/arm/boot/dts/lpc32xx.dtsi
@@ -115,9 +115,10 @@
 			};
 
 			sd at 20098000 {
-				compatible = "arm,pl180", "arm,primecell";
+				compatible = "arm,pl18x", "arm,primecell";
 				reg = <0x20098000 0x1000>;
 				interrupts = <0x0f 0>, <0x0d 0>;
+				status = "disable";
 			};
 
 			i2s1: i2s at 2009C000 {
--- linux-2.6.orig/arch/arm/boot/dts/phy3250.dts
+++ linux-2.6/arch/arm/boot/dts/phy3250.dts
@@ -129,6 +129,14 @@
 					compatible = "atmel,at25";
 				};
 			};
+
+			sd at 20098000 {
+				wp-gpios = <&gpio 3 0 0>;
+				cd-gpios = <&gpio 3 1 0>;
+				cd-inverted;
+				bus-width = <4>;
+				status = "okay";
+			};
 		};
 
 		fab {