[PATCH 3/3] mtd: gpmi: change the code for clocks
Shawn Guo
shawn.guo at linaro.org
Thu Jun 28 22:06:52 EDT 2012
On Thu, Jun 28, 2012 at 11:52:05PM -0400, Huang Shijie wrote:
> From: Huang Shijie <b32955 at freescale.com>
>
> The gpmi nand driver may needs several clocks(MX6Q needs five clocks).
>
> In the old clock framework, all these clocks are chained together,
> all you need is to manipulate the first clock.
>
> But the kernel uses the common clk framework now, which forces us to
> get the clocks one by one. When we use them, we have to enable them
> one by one too.
>
> Signed-off-by: Huang Shijie <b32955 at freescale.com>
> Signed-off-by: Huang Shijie <shijie8 at gmail.com>
> ---
> drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 43 ++++++++++++++++++----
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 63 +++++++++++++++++++++++++++-----
> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 3 +-
> 3 files changed, 91 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> index a1f4332..c3778c0 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -124,12 +124,40 @@ error:
> return -ETIMEDOUT;
> }
>
> +static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v)
> +{
> + struct clk *clk;
> + int ret;
> + int i;
> +
> + for (i = 0; i < GPMI_CLK_MAX; i++) {
> + clk = this->resources.clock[i];
> + if (!clk)
> + break;
> +
> + if (v) {
> + ret = clk_prepare_enable(clk);
> + if (ret)
> + goto err_clk;
> + } else {
> + clk_disable_unprepare(clk);
> + }
> + }
> + return 0;
> +
> +err_clk:
> + return ret;
> +}
> +
> +#define gpmi_enable_clk(x) __gpmi_enable_clk(x, true)
> +#define gpmi_disable_clk(x) __gpmi_enable_clk(x, false)
> +
> int gpmi_init(struct gpmi_nand_data *this)
> {
> struct resources *r = &this->resources;
> int ret;
>
> - ret = clk_prepare_enable(r->clock);
> + ret = gpmi_enable_clk(this);
> if (ret)
> goto err_out;
> ret = gpmi_reset_block(r->gpmi_regs, false);
> @@ -149,7 +177,7 @@ int gpmi_init(struct gpmi_nand_data *this)
> /* Select BCH ECC. */
> writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
>
> - clk_disable_unprepare(r->clock);
> + gpmi_disable_clk(this);
> return 0;
> err_out:
> return ret;
> @@ -205,7 +233,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
> ecc_strength = bch_geo->ecc_strength >> 1;
> page_size = bch_geo->page_size;
>
> - ret = clk_prepare_enable(r->clock);
> + ret = gpmi_enable_clk(this);
> if (ret)
> goto err_out;
>
> @@ -240,7 +268,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
> writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
> r->bch_regs + HW_BCH_CTRL_SET);
>
> - clk_disable_unprepare(r->clock);
> + gpmi_disable_clk(this);
> return 0;
> err_out:
> return ret;
> @@ -716,7 +744,7 @@ void gpmi_begin(struct gpmi_nand_data *this)
> int ret;
>
> /* Enable the clock. */
> - ret = clk_prepare_enable(r->clock);
> + ret = gpmi_enable_clk(this);
> if (ret) {
> pr_err("We failed in enable the clk\n");
> goto err_out;
> @@ -727,7 +755,7 @@ void gpmi_begin(struct gpmi_nand_data *this)
> gpmi_regs + HW_GPMI_TIMING1);
>
> /* Get the timing information we need. */
> - nfc->clock_frequency_in_hz = clk_get_rate(r->clock);
> + nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]);
> clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz;
>
> gpmi_nfc_compute_hardware_timing(this, &hw);
> @@ -784,8 +812,7 @@ err_out:
>
> void gpmi_end(struct gpmi_nand_data *this)
> {
> - struct resources *r = &this->resources;
> - clk_disable_unprepare(r->clock);
> + gpmi_disable_clk(this);
> }
>
> /* Clears a BCH interrupt. */
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 941cfb7..edda3b1 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -464,9 +464,59 @@ acquire_err:
> return -EINVAL;
> }
>
> +static void gpmi_put_clks(struct gpmi_nand_data *this)
> +{
> + struct resources *r = &this->resources;
> + struct clk *clk;
> + int i;
> +
> + for (i = 0; i < GPMI_CLK_MAX; i++) {
> + clk = r->clock[i];
> + if (clk) {
> + clk_put(clk);
> + r->clock[i] = NULL;
> + }
> + }
> +}
> +
> +static char *extra_clks_for_mx6q[] = {
> + "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
> +};
> +
> +static int __devinit gpmi_get_clks(struct gpmi_nand_data *this)
> +{
> + struct resources *r = &this->resources;
> + char **extra_clks = NULL;
> + struct clk *clk;
> + int i;
> +
> + r->clock[0] = clk_get(&this->pdev->dev, NULL);
> + if (IS_ERR(r->clock[0]))
> + goto err_clock;
> +
> + /* Get extra clocks */
> + if (GPMI_IS_MX6Q(this))
> + extra_clks = extra_clks_for_mx6q;
We probably do not need this tweaking. We can have the driver always
take all those 5 clocks, and I think the current imx28 clock driver
can just work with it, because the gpmi-nand clkdev lookup has NULL
con_id and all those 5 clocks can match the same one on imx28.
> + if (!extra_clks)
> + return 0;
> +
> + for (i = 1; i < GPMI_CLK_MAX; i++) {
> + clk = clk_get(NULL, extra_clks[i - 1]);
You should not put NULL but &this->pdev->dev here.
Regards,
Shawn
> + if (IS_ERR(clk))
> + goto err_clock;
> +
> + r->clock[i] = clk;
> + }
> + return 0;
> +
> +err_clock:
> + pr_err("failed in finding the clocks.\n");
> + gpmi_put_clks(this);
> + return -ENOMEM;
> +}
> +
> static int __devinit acquire_resources(struct gpmi_nand_data *this)
> {
> - struct resources *res = &this->resources;
> struct pinctrl *pinctrl;
> int ret;
>
> @@ -492,12 +542,9 @@ static int __devinit acquire_resources(struct gpmi_nand_data *this)
> goto exit_pin;
> }
>
> - res->clock = clk_get(&this->pdev->dev, NULL);
> - if (IS_ERR(res->clock)) {
> - pr_err("can not get the clock\n");
> - ret = -ENOENT;
> + ret = gpmi_get_clks(this);
> + if (ret)
> goto exit_clock;
> - }
> return 0;
>
> exit_clock:
> @@ -512,9 +559,7 @@ exit_regs:
>
> static void release_resources(struct gpmi_nand_data *this)
> {
> - struct resources *r = &this->resources;
> -
> - clk_put(r->clock);
> + gpmi_put_clks(this);
> release_register_block(this);
> release_bch_irq(this);
> release_dma_channels(this);
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> index ce5daa1..1547a60 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> @@ -22,6 +22,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/fsl/mxs-dma.h>
>
> +#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
> struct resources {
> void *gpmi_regs;
> void *bch_regs;
> @@ -29,7 +30,7 @@ struct resources {
> unsigned int bch_high_interrupt;
> unsigned int dma_low_channel;
> unsigned int dma_high_channel;
> - struct clk *clock;
> + struct clk *clock[GPMI_CLK_MAX];
> };
>
> /**
> --
> 1.7.4.4
>
More information about the linux-arm-kernel
mailing list