[PATCHv6 6/7] ARM: OMAP4: suspend: Program all domains to retention

[Tero Kristo]

From: Rajendra Nayak <rnayak at ti.com>

Remove the FIXME's in the suspend sequence since
we now intend to support system level RET support.

Signed-off-by: Rajendra Nayak <rnayak at ti.com>
Signed-off-by: Tero Kristo <t-kristo at ti.com>
[Jean Pihet <j-pihet at ti.com>: ported on top of the functional power
states]
Reviewed-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
 arch/arm/mach-omap2/pm44xx.c |   10 +++-------
 1 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 3a484b1..1e845e8 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -97,19 +97,15 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	if (!strncmp(pwrdm->name, "cpu", 3))
 		return 0;
 
-	/*
-	 * FIXME: Remove this check when core retention is supported
-	 * Only MPUSS power domain is added in the list.
-	 */
-	if (strcmp(pwrdm->name, "mpu_pwrdm"))
-		return 0;
 
 	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 	if (!pwrst)
 		return -ENOMEM;
 
 	pwrst->pwrdm = pwrdm;
-	pwrst->next_state = PWRDM_FUNC_PWRST_CSWR;
+	pwrst->next_state = pwrdm_get_achievable_func_pwrst(
+						pwrdm,
+						PWRDM_FUNC_PWRST_CSWR);
 	list_add(&pwrst->node, &pwrst_list);
 
 	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
-- 
1.7.4.1